
Mapei Tile AdhesiveNo. 09 / 54
Kerabond Plus Technical Data Sheet (TDS)
Tile Adhesive to C2E.
Kerabond Plus is a cementitious adhesive from Mapei, classified C2E under EN 12004, offering improved adhesion with extended open time. It bonds every common ceramic tile type, from porcelain and single fired tiles to terracotta, klinker and mosaic, on internal and external floors, walls and ceilings, and also spot bonds insulation materials such as foam polystyrene and rock wool.
- Bonding porcelain, ceramic, terracotta and klinker tiles
- Internal and external floors, walls and ceilings
- Large floor areas benefiting from extended open time
- Spot bonding insulation materials
- Damp stable stone fixing
Build a list across products and send it once, or ask about Kerabond Plus on WhatsApp now.
- Class
- C2E
- Consumption
- 2 to 5 kg/m²
- Pack we stock
- 25 kg
- Colour
- Grey, White
Mapei document 00087 · revision 10-2019
About Kerabond Plus
The extended open time keeps the adhesive workable longer after spreading, a real advantage on large floor areas and in warm UAE conditions. Damp stable stone can also be fixed. Substrates include renders, cement mortar beds and cured cementitious screeds. Produced in the UAE and supplied through Lapiz Blue with stock in Dubai, Abu Dhabi and Sharjah. Download the complete technical data sheet from this page.
Documentation
Related documentation
Technical data sheet
Revision 10-2019 · 2.4 MB · PDF
Kerabond Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
125 to 150kg
- Normal size tiles, No. 5 spreader: 2.5 to 3 kg/m2
- over 50 m2
Order 5 to 6 packs of 25 kg bag
Taken from the Kerabond Plus data sheet: CONSUMPTION: bonding ceramics, mosaic and small tiles in general (No. 4 spreader) 2 kg/m2, normal size tiles (No. 5 spreader) 2.5-3 kg/m2, large tiles, external floors (No. 6 spreader) 5 kg/m2. No site allowance is added unless you turn one on. The sheet also lists spot bonding of insulating material at approx. 0.5-0.8 kg/m2 for foam sheets and approx. 1.5 kg/m2 for plasterboard and expanded cement panels. That is not tiling and is not offered here.
Application
Where it is used.
- 01Bonding porcelain, ceramic, terracotta and klinker tiles
- 02Internal and external floors, walls and ceilings
- 03Large floor areas benefiting from extended open time
- 04Spot bonding insulation materials
- 05Damp stable stone fixing
Where it is not the right product
- On heated screeds or substrates that move, where an S1 or S2 deformable grade is required
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- C2E
- EN 12004 and ISO 13007
- EMICODE EC1 Plus - very low emission
| Classification | C2E |
|---|---|
| Coverage | Bonding ceramics -- Mosaic and small tiles in general (No. 4 spreader): 2 kg/m² -- Normal size tiles (No. 5 spreader): 2.5-3 kg/m² -- Large tiles, external floors (No. 6 spreader): 5 kg/m² Spot-bonding insulating material -- Foam sheets, etc.: approx. 0.5-0.8 kg/m² -- Plasterboard and expanded cemen |
| Pack size | 25 kg |
| Pot life | more than 8 hours |
| Open time | > 30 minutes |
| Adjustment time | approx. 60 minutes |
| Set to light foot traffic | 24 hours |
| Waiting time before grouting | in wall tiles: after 4-8 hours |
| Colours | Grey, White |
| Mixing ratio | 100 parts in weight of Kerabond Plus with 27-29 |
| Application temperature | +5°C to +40°C |
| Consistency | powder |
| Storage and shelf life | Kerabond Plus may be stored for 12 months in its original packaging in a dry place. |
| EMICODE | EC1 Plus - very low emission |
| Ph | 13 |
| Density | 1,300 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Kerabond Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts in weight of Kerabond Plus with 27-29. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
more than 8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Kerabond Plus may be stored for 12 months in its original packaging in a dry place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Kerabond Plus, a tile adhesive manufactured by Mapei, classified C2E. Allow 2 to 5 kg/m2, as published by the manufacturer. Mix at 100 parts in weight of Kerabond Plus with 27-29. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Kerabond Plus |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | C2E |
| Consumption | 2 to 5 kg/m2 |
| Pack size | 25 kg |
| Mixing ratio | 100 parts in weight of Kerabond Plus with 27-29 |
| Set time | 24 hours |
| Pot life | more than 8 hours |
| Open time | > 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Kerabond Plus is classified C2E according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Bonding ceramics -- Mosaic and small tiles in general (No. 4 spreader): 2 kg/m² -- Normal size tiles (No. 5 spreader): 2.5-3 kg/m² -- Large tiles, external floors (No. 6 spreader): 5 kg/m² Spot-bonding insulating material -- Foam sheets, etc.: approx. 0.5-0.8 kg/m² -- Plasterboard and expanded cemen
25 kg
You can download the official Kerabond Plus technical data sheet as a PDF directly from this page, revision 10-2019, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Kerabond Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Kerabond Plus you need, or describe the job and we will work it out with you.