
Mapei Tile AdhesiveNo. 10 / 54
Kerabond T Technical Data Sheet (TDS)
Tile Adhesive to ISO 13007-1 C1T.
Kerabond T is the C1T adhesive in the Mapei cementitious range, a grey or white powder with high grab and no vertical slip, so wall tiles can be set from the top down without spacer pegs. Where it stops is the useful part.
- Indoor and outdoor ceramic tiles and mosaics
- Floors, walls and ceilings
- Conventional renders and cement mortar walls
- Well aged concrete and reinforced floating slabs
- Primed gypsum supports and anhydrite screeds
- Spot bonding insulating and sound deadening panels
Build a list across products and send it once, or ask about Kerabond T on WhatsApp now.
- Class
- ISO 13007-1 C1T
- Consumption
- 2 to 6 kg/m²
- Pack we stock
- 25 kg
- Colour
- Grey, White
About Kerabond T
Mapei keeps it to absorbent ceramic and mosaic over sound render, well aged concrete or primed gypsum, and rules it out for non-absorbent tiles over non-absorbent substrates, wood and plasterboard, and floors needing quick foot traffic. Porcelain, large formats, tile over tile, heated screeds and external work belong to a C2 such as Keraflex, or to Kerabond T gauged with Isolastic. Consumption follows the trowel: 2 to 3 kg per square metre on a No. 4 or 5, 4 to 5 kg on a No. 5 or 6, over 6 kg for large sizes and exteriors. Tiles adjust for 45 minutes; floors grout at 24 hours.
Documentation
Related documentation
Technical data sheet
0.7 MB · PDF
Kerabond T as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
200 to 250kg
- Medium size tiles, trowel No. 5/6: 4 to 5 kg/m2
- over 50 m2
Order 8 to 10 packs of 25 kg bag
Taken from the Kerabond T data sheet: CONSUMPTION: ceramic tiling, mosaics and small size tiles (trowel No. 4/5) 2-3 kg/m2, medium size tiles (trowel No. 5/6) 4-5 kg/m2, large sizes, floors, exteriors (trowel No. 6/10) over 6 kg/m2. No site allowance is added unless you turn one on. Two figures disagree on this sheet. The CONSUMPTION section, used here, gives 2-3, 4-5 and over 6 kg/m2. The application paragraph on the same sheet quotes lower: 2.5-3 kg/m2 for the No. 5 trowel and approx. 5 kg/m2 for the No. 6. The top row is open ended, the sheet says over 6 kg/m2 and above, so treat 6 as a floor and not a ceiling. The sheet also lists spot bonding of insulating materials at approx. 0.5-0.8 kg/m2 for foam and approx. 1.5 kg/m2 for gypsum wallboard and foamed concrete, which is not tiling and is not offered here. Also supplied in 4x5 kg carton boxes.
Application
Where it is used.
- 01Indoor and outdoor ceramic tiles and mosaics
- 02Floors, walls and ceilings
- 03Conventional renders and cement mortar walls
- 04Well aged concrete and reinforced floating slabs
- 05Primed gypsum supports and anhydrite screeds
- 06Spot bonding insulating and sound deadening panels
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- ISO 13007-1 C1T
- EN 12004 and ISO 13007
- EMICODE EC1 Plus - very low emission
| Classification | ISO 13007-1 C1T |
|---|---|
| Coverage | Ceramic tiling ▪ Mosaics and small size tiles (trowel No. 4/5): 2-3 kg/m ▪ Medium size tiles (trowel No. 5/6): 4-5 kg/m ▪ Large sizes, floors, exteriors (trowel No. 6/10): > 6 kg/m and over Spot-bonding insulating materials ▪ Foam materials, etc.: approx. 0.5-0.8 kg/m ▪ Gypsum wallboard, foamed conc |
| Pack size | 25 kg |
| Open time | > 20 minutes |
| Adjustment time | approx. 45 minutes |
| Set to light foot traffic | 24 hours |
| Colours | Grey, White |
| Mixing ratio | 100 parts of Kerabond T with 27 - 30 parts of water for white |
| Application temperature | from +5°C to +40°C |
| Consistency | very pasty |
| Storage and shelf life | 2 2 2 2 2 2 12 months when stored in a normal environment and original packaging. |
| EMICODE | EC1 Plus - very low emission |
| Ph | 13 |
| Density | 1,300 kg/m |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Kerabond T. Manufacturers revise their sheets, so ask us for the current edition before you specify.
Consumption by trowel
2-3kg/m²
Mosaics and small size tiles
Trowel No. 4
4-5kg/m²
Medium size tiles
Trowel No. 5
6kg/m²
Large sizes, floors, exteriors
Trowel No. 6
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts of Kerabond T with 27 - 30 parts of water for white. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
2 2 2 2 2 2 12 months when stored in a normal environment and original packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Kerabond T, a tile adhesive manufactured by Mapei, classified ISO 13007-1 C1T. Allow 2 to 6 kg/m2, as published by the manufacturer. Mix at 100 parts of Kerabond T with 27 - 30 parts of water for white. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Kerabond T |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | ISO 13007-1 C1T |
| Consumption | 2 to 6 kg/m2 |
| Pack size | 25 kg |
| Mixing ratio | 100 parts of Kerabond T with 27 - 30 parts of water for white |
| Set time | 24 hours |
| Open time | > 20 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Kerabond T is classified ISO 13007-1 C1T according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Ceramic tiling ▪ Mosaics and small size tiles (trowel No. 4/5): 2-3 kg/m ▪ Medium size tiles (trowel No. 5/6): 4-5 kg/m ▪ Large sizes, floors, exteriors (trowel No. 6/10): > 6 kg/m and over Spot-bonding insulating materials ▪ Foam materials, etc.: approx. 0.5-0.8 kg/m ▪ Gypsum wallboard, foamed conc
25 kg
You can download the official Kerabond T technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Kerabond T in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Kerabond T you need, or describe the job and we will work it out with you.