
Mapei GroutNo. 11 / 54
Keracolor FF Technical Data Sheet (TDS)
Grout to CG2WA.
Keracolor FF is a high performance, polymer modified cementitious grout from Mapei, classified CG2WA under EN 13888, for joints up to 6 mm. Water repellent DropEffect technology reduces surface water absorption, helping joints shed dirt and stay cleaner in kitchens, bathrooms and pool surrounds.
- Grouting joints up to 6 mm in interior and exterior tiling
- Porcelain, klinker, stone and glass mosaic finishes
- Kitchens, bathrooms and pool surrounds needing water repellent joints
- Polished floors needing a smooth fine finish
- High traffic areas needing abrasion resistant joints
Build a list across products and send it once, or ask about Keracolor FF on WhatsApp now.
- Class
- CG2WA
- Consumption
- 0.152 kg/m² on a 600x600x10 mm tile at a 3 mm joint
- Pack we stock
- 20 kg
- Colour
- 100, 103, 110, 111, 112, 113, 114, 116
Mapei document 00131 · revision 12-2025
About Keracolor FF
It grouts interior and exterior floor and wall tiling of every kind, from porcelain and klinker to natural stone, marble, granite and glass mosaic, and produces a smooth, compact fine finish suited to polished surfaces. The W and A ratings mark reduced water absorption and high abrasion resistance, the qualities that keep narrow joints presentable under heavy UAE foot traffic. Produced in the UAE and available in the Mapei coloured grout range. Download the full technical data sheet from this page.
Documentation
Related documentation
Technical data sheet
Revision 12-2025 · 1.9 MB · PDF
Keracolor FF as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.
As published in the data sheet
7.59kg
- 600 x 600 x 10 mm tile, 3 mm joint
- 0.1519 kg/m2 by the sheet's own formula
- over 50 m2
Order 1 pack of 20 kg paper bag
Taken from the Keracolor FF data sheet: The sheet prints the formula as (A + B) / (A x B) x C x D x 1.5 = kg/m2, to one decimal place. 1.519 is the value within that printed precision which reproduces all 39 printed cells of its consumption table; a flat 1.5 misses one. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Grouting joints up to 6 mm in interior and exterior tiling
- 02Porcelain, klinker, stone and glass mosaic finishes
- 03Kitchens, bathrooms and pool surrounds needing water repellent joints
- 04Polished floors needing a smooth fine finish
- 05High traffic areas needing abrasion resistant joints
Where it is not the right product
- Where the joint meets chemicals or constant water, which calls for an epoxy grout
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- CG2WA
- EN 13888 and ISO 13007
- EMICODE EC1 Plus - very low emission
| Classification | CG2WA |
|---|---|
| Joint width | 6 mm |
| Pack size | 20 kg, 5 kg |
| Pot life | approx. 2 hours |
| Set to light foot traffic | 24 hours |
| Colours | 100, 103, 110, 111, 112, 113, 114, 116 |
| Mixing ratio | 100 parts of Keracolor FF with 23-25 parts of water by |
| Application temperature | from +5°C to +40°C |
| Consistency | fluid paste |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Keracolor FF has a shelf life of 12 months for 20 kg and 24 months for 4x5 kg alupack boxes. Always refer to what is written on the packaging. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1000-1400 kg/m³ |
| Dry solids | 100% |
| Ph | approx. 13 |
| Water absorption | Water absorption after 4 hours (EN 13888-2) |
Typical values as Mapei prints them in the data sheet for Keracolor FF. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 parts of Keracolor FF with 23-25 parts of water by. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 2 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Keracolor FF has a shelf life of 12 months for 20 kg and 24 months for 4x5 kg alupack boxes. Always refer to what is written on the packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Keracolor FF, a grout manufactured by Mapei, classified CG2WA. Allow 0.152 kg/m2 on a 600x600x10 mm tile at a 3 mm joint, as published by the manufacturer. Mix at 100 parts of Keracolor FF with 23-25 parts of water by. Supplied in 20 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Keracolor FF |
|---|---|
| Manufacturer | Mapei |
| Type | Grout |
| Classification | CG2WA |
| Consumption | 0.152 kg/m2 on a 600x600x10 mm tile at a 3 mm joint |
| Pack size | 20 kg, 5 kg |
| Mixing ratio | 100 parts of Keracolor FF with 23-25 parts of water by |
| Set time | 24 hours |
| Pot life | approx. 2 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
Keracolor FF is classified CG2WA according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: 6 mm
20 kg, 5 kg
You can download the official Keracolor FF technical data sheet as a PDF directly from this page, revision 12-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
A grouting float packs the joint without voids, and a cleaning float takes the haze off before it hardens.
View the range
Peygran
Spacers
The spacer sets the joint width, which decides the grout grade and how much of it the job takes.
View the range
Keiser
Mixing Applications
Mixing to the same water every time is what keeps the colour even from batch to batch.
View the range
Keracolor FF in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keracolor FF you need, or describe the job and we will work it out with you.