
Mapei Tile AdhesiveNo. 12 / 54
Keraflex Technical Data Sheet (TDS)
Tile Adhesive to C2TE.
Keraflex is a high performance cementitious adhesive from Mapei, classified C2TE under EN 12004, with no vertical slip and extended open time. It bonds ceramic tiles, porcelain, stone materials and mosaics of every type on floors, walls and ceilings, inside and outside.
- Bonding ceramic, porcelain and stone tiles on interior and exterior floors and walls
- Fixing every type of mosaic on floors, walls and ceilings
- Wall tiling where no vertical slip and extended open time are needed
- Spot bonding insulation panels such as expanded polystyrene and rock wool
- Application over cement render, concrete and primed gypsum substrates
Build a list across products and send it once, or ask about Keraflex on WhatsApp now.
- Class
- C2TE
- Consumption
- 2 to 4 kg/m²
- Pack we stock
- 25 kg
- Colour
- Grey, White
Mapei document 00106 · revision 7-2020
About Keraflex
The extended open time gives fixers more working room in warm UAE conditions, while the no slip consistency holds wall tiles in place without supports. Keraflex is also suitable for spot bonding insulation materials such as expanded polystyrene and rock wool panels. Substrates include cement render, concrete, aerated block walls and primed gypsum or anhydrite. This page hosts the UAE edition of the Keraflex technical data sheet with the complete performance table, consumption guidance and application instructions as published by the manufacturer.
Documentation
Related documentation
Technical data sheet
Revision 7-2020 · 3.8 MB · PDF
Keraflex as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
125 to 150kg
- Normal sizes, trowel n. 5: 2.5 to 3 kg/m2
- over 50 m2
Order 5 to 6 packs of 25 kg bag
Taken from the Keraflex data sheet: CONSUMPTION: bonding ceramic tiles, mosaics and small sizes in general (trowel n. 4) 2 kg/m2, normal sizes (trowel n. 5) 2.5-3 kg/m2, large sizes, exterior floors (trowel n. 6) 4 kg/m2. No site allowance is added unless you turn one on. The sheet also lists spot bonding of insulating material at approx. 0.5-0.8 kg/m2 for foam and approx. 1.5 kg/m2 for gypsum board panels and cellular concrete. That is not tiling and is not offered here.
Application
Where it is used.
- 01Bonding ceramic, porcelain and stone tiles on interior and exterior floors and walls
- 02Fixing every type of mosaic on floors, walls and ceilings
- 03Wall tiling where no vertical slip and extended open time are needed
- 04Spot bonding insulation panels such as expanded polystyrene and rock wool
- 05Application over cement render, concrete and primed gypsum substrates
Where it is not the right product
- On heated screeds or substrates that move, where an S1 or S2 deformable grade is required
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- C2TE
- EN 12004 and ISO 13007
- EMICODE EC1 Plus - very low emission
| Classification | C2TE |
|---|---|
| Coverage | Bonding ceramic tiles: - Mosaics and small sizes in general (trowel n. 4): 2 kg/m² - Normal sizes (trowel n. 5): 2.5-3 kg/m² - Large sizes, exterior floors (trowel n. 6): 4 kg/m² Spot-bonding insulating material: - Foam, etc. approx. 0.5-0.8 kg/m² - Gypsum board panels, cellular concrete: approx. 1. |
| Pack size | 25 kg |
| Pot life | over 8 hours |
| Open time | > 30 minutes |
| Adjustment time | approx. 60 minutes |
| Set to light foot traffic | 24 hours |
| Colours | Grey, White |
| Bond strength | according to EN 1348 (N/mm²) |
| Application temperature | from +5°C to +40°C |
| Consistency | of the mix: paste |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Kerafiex has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. Laying polystyrene foam slabs with Kera Installation of pre-glossed marble on floors Installation of sing |
| EMICODE | EC1 Plus - very low emission |
| Ph | 13 |
| Density | 1,300 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Keraflex. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
over 8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Kerafiex has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. Laying polystyrene foam slabs with Kera Installation of pre-glossed marble on floors Installation of sing in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Keraflex, a tile adhesive manufactured by Mapei, classified C2TE. Allow 2 to 4 kg/m2, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Keraflex |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | C2TE |
| Consumption | 2 to 4 kg/m2 |
| Pack size | 25 kg |
| Set time | 24 hours |
| Pot life | over 8 hours |
| Open time | > 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Keraflex is classified C2TE according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Bonding ceramic tiles: - Mosaics and small sizes in general (trowel n. 4): 2 kg/m² - Normal sizes (trowel n. 5): 2.5-3 kg/m² - Large sizes, exterior floors (trowel n. 6): 4 kg/m² Spot-bonding insulating material: - Foam, etc. approx. 0.5-0.8 kg/m² - Gypsum board panels, cellular concrete: approx. 1.
25 kg
You can download the official Keraflex technical data sheet as a PDF directly from this page, revision 7-2020, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Keraflex in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keraflex you need, or describe the job and we will work it out with you.