Keraflex Maxi S1 Zero tile adhesive pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Tile AdhesiveNo. 13 / 54

Keraflex Maxi S1 Zero Technical Data Sheet (TDS)

Tile Adhesive to ISO 13007-1 C2TE S1.

Keraflex Maxi S1 Zero is the thick bed member of the Mapei deformable adhesive family, classified C2TE S1, the deformable grade for large and heavy tiles. Bed depth is the honest distinction against plain Keraflex: this one holds its shape at high thickness, so a large format slab does not sink into the mortar on a floor or slide down a wall as it sets.

  • Large format porcelain and stone tiles
  • Thick bed floor and wall installations
  • Tiling over existing ceramic tiles
  • Underfloor heating and waterproofed substrates
  • Heavy slabs needing no vertical slip
Data sheet1.0 MB

Build a list across products and send it once, or ask about Keraflex Maxi S1 Zero on WhatsApp now.

Class
ISO 13007-1 C2TE S1
Consumption
1.2 kg/m² per mm
Pack we stock
25 kg
Colour
Grey, White

Mapei document 00056 · revision 7-2026

About Keraflex Maxi S1 Zero

Against a C1 adhesive such as Kerabond T, the C2 grip plus deformability is what carries porcelain and stone over heated screeds, waterproofed surfaces and existing tiles. Open time runs beyond 30 minutes and a tile is still adjustable at roughly 45 minutes, which is the figure that counts on a UAE site where application is allowed up to 40 degrees. Grey and white, 25 kg bags, EC1 Plus rated.

Documentation

Related documentation

  • Technical data sheet

    Revision 7-2026 · 1.0 MB · PDF

    Keraflex Maxi S1 Zero as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 15 mm.

As published in the data sheet

300kg

  • 1.2 kg/m2 per mm
  • 5 mm thick
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Keraflex Maxi S1 Zero data sheet: CONSUMPTION: 1.2 kg/m2 per mm of thickness. The sheet also states it can be applied at high thicknesses, up to 15 mm, with no drop. No site allowance is added unless you turn one on. The sheet prints a maximum thickness of 15 mm and no minimum, so the 2 mm floor and the 5 mm default are the calculator's rather than the manufacturer's. This is the thick bed grade of the Keraflex family, which is why the default sits above a normal thin bed. The sheet prints no notched trowel table, so there are no trowel tiers to choose between.

Application

Where it is used.

  1. 01Large format porcelain and stone tiles
  2. 02Thick bed floor and wall installations
  3. 03Tiling over existing ceramic tiles
  4. 04Underfloor heating and waterproofed substrates
  5. 05Heavy slabs needing no vertical slip

Specification

Technical data.

  • ISO 13007-1 C2TE S1
  • EN 12004 and ISO 13007
  • EMICODE EC1 Plus - very low emission
Keraflex Maxi S1 Zero technical specifications from the manufacturer TDS
ClassificationC2TE S1
Coverage1.2 kg/m² per mm of thickness.
Pack size25 kg
Pot lifemore than 8 hours
Open time> 30 minutes
Adjustment timeapproximately 45 minutes
Set to light foot traffic24 hours
Waiting time before groutingin wall tiles: after 4-8 hours
ColoursGrey, White
Mixing ratio100 parts in weight of Keraflex Maxi S1 with 28-30
Application temperature+5°C to +40°C
Consistencypowder
Storage and shelf lifeKeraflex Maxi S1 may be stored for 12 months in its original packaging in a dry place.
EMICODEEC1 Plus - very low emission

Typical values as Mapei prints them in the data sheet for Keraflex Maxi S1 Zero. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts in weight of Keraflex Maxi S1 with 28-30. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

more than 8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Keraflex Maxi S1 may be stored for 12 months in its original packaging in a dry place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Keraflex Maxi S1 Zero, a tile adhesive manufactured by Mapei, classified ISO 13007-1 C2TE S1. Allow 1.2 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts in weight of Keraflex Maxi S1 with 28-30. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Keraflex Maxi S1 Zero
ProductKeraflex Maxi S1 Zero
ManufacturerMapei
TypeTile Adhesive
ClassificationISO 13007-1 C2TE S1
Consumption1.2 kg/m2 per mm
Pack size25 kg
Mixing ratio100 parts in weight of Keraflex Maxi S1 with 28-30
Set time24 hours
Pot lifemore than 8 hours
Open time> 30 minutes
Unit of measurementm2

Frequently Asked Questions

Keraflex Maxi S1 Zero is classified ISO 13007-1 C2TE S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 1.2 kg/m² per mm of thickness.

25 kg

You can download the official Keraflex Maxi S1 Zero technical data sheet as a PDF directly from this page, revision 7-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Keraflex Maxi S1 Zero in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keraflex Maxi S1 Zero you need, or describe the job and we will work it out with you.

Chat on WhatsApp