
Mapei Tile AdhesiveNo. 14 / 54
Keralastic Technical Data Sheet (TDS)
Tile Adhesive to R2.
Keralastic is a two component polyurethane adhesive from Mapei, classified R2 under EN 12004, for bonding ceramic tiles, stone material and mosaics where cementitious products reach their limits. Being reaction cured, it adheres to screeds, renders and concrete as well as difficult substrates such as wood, metal, PVC, reinforced polyester, fibre cement and gypsum board.
- Bonding ceramic tiles and mosaics on wood, metal, PVC and fibre cement
- Tiling showers and prefabricated bathroom panels
- Fixing stone material where a flexible reactive bond is needed
- Installations over gypsum, gypsum board and reinforced polyester
- Substrates subject to movement where cementitious adhesives are unsuitable
Build a list across products and send it once, or ask about Keralastic on WhatsApp now.
- Class
- R2
- Consumption
- 2.5 to 5 kg/m²
- Pack we stock
- 10 kg
Mapei document 00122
About Keralastic
It contains no water or solvents, cures without shrinkage and forms a tough, flexible bond that copes with substrate movement. Typical uses include showers, prefabricated bathroom sheets, wooden worktops and mixed substrate refurbishments. For UAE projects involving unusual substrates or wet areas, Keralastic offers a dependable reactive alternative to cement based adhesives. The full technical data sheet with pot life, curing times and consumption can be downloaded from this page.
Documentation
Related documentation
Technical data sheet
2.8 MB · PDF
Keralastic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
175kg
- Normal size tiles, trowel No. 5: 3.5 kg/m2
- over 50 m2
Order 18 packs of 10 kg double metal drum, A plus B
Taken from the Keralastic data sheet: CONSUMPTION: bonding of ceramics and stone material, mosaics and small size tiles (trowel No. 4) 2.5 kg/m2, normal size tiles (trowel No. 5) 3.5 kg/m2, large size tiles, marble, stones (back buttering) 5 kg/m2. Rate is for the mixed A plus B product. No site allowance is added unless you turn one on. Two component polyurethane, supplied A plus B in double metal drums. The figures are for the mixed product, so a 10 kg drum is 9.4 kg of component A plus 0.6 kg of component B and a 5 kg drum is 4.7 plus 0.3. Also available in the 5 kg drum. Where the layer has to waterproof as well, the sheet calls for a flat trowel coat of at least 2 mm reworked with a notched trowel and never thinner than 1 mm, which uses more than the table above.
Application
Where it is used.
- 01Bonding ceramic tiles and mosaics on wood, metal, PVC and fibre cement
- 02Tiling showers and prefabricated bathroom panels
- 03Fixing stone material where a flexible reactive bond is needed
- 04Installations over gypsum, gypsum board and reinforced polyester
- 05Substrates subject to movement where cementitious adhesives are unsuitable
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- R2
- EN 12004 and ISO 13007
| Coverage | Bonding of ceramics and stone material: ▪ Mosaics and small size tiles (trowel No. 4): 2.5 kg/m² ▪ Normal size tiles (trowel No. 5): 3.5 kg/m² ▪ Large size tiles, marble, stones (back buttering): 5 kg/m² |
|---|---|
| Pack size | 10 kg and 5 kg twin drum kits |
| Pot life | 30-40 minutes |
| Open time | 50 minutes |
| Adjustment time | 90 minutes |
| Set to light foot traffic | 12 hours |
| Application temperature | from +10°C to +30°C |
| Consistency | thick paste fluid liquid |
| Storage and shelf life | Keralastic and Keralastic T are stable for at least 24 months when stored in sealed drums. Component B (hardener) must be stored in warm place to avoid crystallisation during cold weather (at least at +10°C). Should crystallisation occur, re-dissolve by warming before use. |
| Density | Keralastic 1.50 0.93 g/cm³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Keralastic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
Consumption by trowel
2.5kg/m²
Mosaics and small size tiles
Trowel No. 4
3.5kg/m²
Normal size tiles
Trowel No. 5
On site
Packs, mixing and storage.
We stock
10 kg and 5 kg twin drum kits. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
30-40 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Keralastic and Keralastic T are stable for at least 24 months when stored in sealed drums. Component B (hardener) must be stored in warm place to avoid crystallisation during cold weather (at least at +10°C). Should crystallisation occur, re-dissolve by warming before use. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Keralastic, a tile adhesive manufactured by Mapei, classified R2. Allow 2.5 to 5 kg/m2, as published by the manufacturer. Supplied in 10 kg and 5 kg twin drum kits. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Keralastic |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | R2 |
| Consumption | 2.5 to 5 kg/m2 |
| Pack size | 10 kg and 5 kg twin drum kits |
| Set time | 12 hours |
| Pot life | 30-40 minutes |
| Open time | 50 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Keralastic is classified R2 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Bonding of ceramics and stone material: ▪ Mosaics and small size tiles (trowel No. 4): 2.5 kg/m² ▪ Normal size tiles (trowel No. 5): 3.5 kg/m² ▪ Large size tiles, marble, stones (back buttering): 5 kg/m²
10 kg and 5 kg twin drum kits
You can download the official Keralastic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Keralastic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keralastic you need, or describe the job and we will work it out with you.