Keralastic T tile adhesive pack
Mapei's own picture. The pack we stock: 10 kg.

Mapei Tile AdhesiveNo. 15 / 54

Keralastic T Technical Data Sheet (TDS)

Tile Adhesive to R2.

Keralastic T is a two component polyurethane adhesive from Mapei, classified R2 under EN 12004, with a thixotropic consistency that holds tiles on vertical surfaces without slip. It bonds ceramic tiles, stone material and mosaics indoors and outdoors on substrates that defeat cementitious adhesives: wood, metal, PVC, asphalt, reinforced polyester, fibre cement, gypsum and gypsum board as well as ordinary screeds, renders and concrete.

  • Bonding ceramic tiles, stone and mosaics on walls without slip
  • Tiling over wood, metal, PVC, asphalt and reinforced polyester
  • Showers and prefabricated bathroom panels
  • Refurbishments over existing surfaces that cannot be removed
  • Substrates subject to movement needing a flexible reactive bond
Data sheet2.8 MB

Build a list across products and send it once, or ask about Keralastic T on WhatsApp now.

Class
R2
Consumption
2.5 to 5 kg/m²
Pack we stock
10 kg
Colour
Grey, White

Mapei document 02717

About Keralastic T

The cured bond is strong yet flexible, absorbing the movement of mixed or deformable substrates. Typical UAE uses include showers, prefabricated bathroom sheets, worktops and refurbishments where the existing surface cannot be removed. Compared with standard Keralastic, the T version is the one to choose for walls and overhead work. The full technical data sheet is available for download on this page.

Documentation

Related documentation

  • Technical data sheet

    2.8 MB · PDF

    Keralastic T as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

175kg

  • Normal size tiles, trowel No. 5: 3.5 kg/m2
  • over 50 m2

Order 18 packs of 10 kg double metal drum, A plus B

Send this quantity for a quote

Taken from the Keralastic T data sheet: CONSUMPTION: bonding of ceramics and stone material, mosaics and small size tiles (trowel No. 4) 2.5 kg/m2, normal size tiles (trowel No. 5) 3.5 kg/m2, large size tiles, marble, stones (back buttering) 5 kg/m2. Rate is for the mixed A plus B product. No site allowance is added unless you turn one on. Two component polyurethane, supplied A plus B in double metal drums. The figures are for the mixed product, so a 10 kg drum is 9.4 kg of component A plus 0.6 kg of component B and a 5 kg drum is 4.7 plus 0.3. Also available in the 5 kg drum. Where the layer has to waterproof as well, the sheet calls for a flat trowel coat of at least 2 mm reworked with a notched trowel and never thinner than 1 mm, which uses more than the table above.

Application

Where it is used.

  1. 01Bonding ceramic tiles, stone and mosaics on walls without slip
  2. 02Tiling over wood, metal, PVC, asphalt and reinforced polyester
  3. 03Showers and prefabricated bathroom panels
  4. 04Refurbishments over existing surfaces that cannot be removed
  5. 05Substrates subject to movement needing a flexible reactive bond

Where it is not the right product

  • On external walls, where a cementitious plaster is required
  • In bathrooms, kitchens or any permanently wet area

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • R2
  • EN 12004 and ISO 13007
Keralastic T technical specifications from the manufacturer TDS
CoverageBonding of ceramics and stone material: ▪ Mosaics and small size tiles (trowel No. 4): 2.5 kg/m² ▪ Normal size tiles (trowel No. 5): 3.5 kg/m² ▪ Large size tiles, marble, stones (back buttering): 5 kg/m²
Pack size10 kg
Pot life30-40 minutes
Open time50 minutes
Adjustment time90 minutes
Set to light foot traffic12 hours
ColoursGrey, White
Application temperaturefrom +10°C to +30°C
Consistencythick paste fluid liquid
Storage and shelf lifeKeralastic and Keralastic T are stable for at least 24 months when stored in sealed drums. Component B (hardener) must be stored in warm place to avoid crystallisation during cold weather (at least at +10°C). Should crystallisation occur, re-dissolve by warming before use.
DensityKeralastic 1.50 0.93 g/cm³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Keralastic T. Manufacturers revise their sheets, so ask us for the current edition before you specify.

Consumption by trowel

2.5kg/m²

Mosaics and small size tiles

Trowel No. 4

3.5kg/m²

Normal size tiles

Trowel No. 5

On site

Packs, mixing and storage.

We stock

10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

30-40 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Keralastic and Keralastic T are stable for at least 24 months when stored in sealed drums. Component B (hardener) must be stored in warm place to avoid crystallisation during cold weather (at least at +10°C). Should crystallisation occur, re-dissolve by warming before use. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Keralastic T, a tile adhesive manufactured by Mapei, classified R2. Allow 2.5 to 5 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Keralastic T
ProductKeralastic T
ManufacturerMapei
TypeTile Adhesive
ClassificationR2
Consumption2.5 to 5 kg/m2
Pack size10 kg
Set time12 hours
Pot life30-40 minutes
Open time50 minutes
Unit of measurementm2

Frequently Asked Questions

Keralastic T is classified R2 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Bonding of ceramics and stone material: ▪ Mosaics and small size tiles (trowel No. 4): 2.5 kg/m² ▪ Normal size tiles (trowel No. 5): 3.5 kg/m² ▪ Large size tiles, marble, stones (back buttering): 5 kg/m²

10 kg

You can download the official Keralastic T technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Keralastic T in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keralastic T you need, or describe the job and we will work it out with you.

Chat on WhatsApp