
Mapei Epoxy GroutNo. 16 / 54
Kerapoxy Technical Data Sheet (TDS)
Epoxy Grout to RG.
Kerapoxy is a two component, acid resistant epoxy mortar from Mapei, classified RG under EN 13888 as a grout and R2T as an adhesive. It grouts joints of at least 1 mm in ceramic tile and natural stone floors and walls, indoors and outdoors, and can also be used for acid resistant bonding of tiles, stone, fibre cement and concrete.
- Grouting ceramic and stone floors and walls indoors and outdoors
- Commercial kitchens and food areas requiring HACCP compliant joints
- Laboratories and industrial floors exposed to chemicals
- Swimming pools and wet areas needing stain resistant joints
- Acid resistant bonding of tiles, stone, fibre cement and concrete
Build a list across products and send it once, or ask about Kerapoxy on WhatsApp now.
- Class
- RG
- Consumption
- 0.16 kg/m² on a 600x600x10 mm tile at a 3 mm joint
- Pack we stock
- 10 kg
- Colour
- 100, 110, 111, 112, 113, 114, 120, 130
Mapei document 00141
About Kerapoxy
Cured Kerapoxy resists chemicals, stains and frequent aggressive cleaning, and supports installations that must comply with HACCP food safety requirements. That makes it the reference choice for commercial kitchens, food production areas, laboratories, swimming pools and industrial floors across the UAE. Available in 17 colours. The complete technical data sheet with chemical resistance tables, times and consumption is available for download on this page.
Documentation
Related documentation
Technical data sheet
3.1 MB · PDF
Kerapoxy as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.
As published in the data sheet
8.00kg
- 600 x 600 x 10 mm tile, 3 mm joint
- 0.16 kg/m2 by the sheet's own formula
- over 50 m2
Order 1 pack of 10 kg pre dosed unit, component A plus component B
Taken from the Kerapoxy data sheet: Fitted to the printed consumption table. 1.6 reproduces all 108 printed cells, and is the constant Mapei prints in plain text on the Kerapoxy CQ sheet for the same formula. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Grouting ceramic and stone floors and walls indoors and outdoors
- 02Commercial kitchens and food areas requiring HACCP compliant joints
- 03Laboratories and industrial floors exposed to chemicals
- 04Swimming pools and wet areas needing stain resistant joints
- 05Acid resistant bonding of tiles, stone, fibre cement and concrete
Specification
Technical data.
- RG
- EN 13888 and ISO 13007
- EMICODE (as a grout): EC1 Plus - very low emission
| Joint width | joints of at least 1 mm |
|---|---|
| Pack size | 10 kg, 5 kg, 9 kg, 1 kg |
| Pot life | 45 minutes |
| Open time | (as an adhesive): 30 minutes |
| Adjustment time | (as an adhesive): 60 minutes |
| Set to light foot traffic | 24 hours |
| Colours | 100, 110, 111, 112, 113, 114, 120, 130 |
| Application temperature | from +12°C to +30°C |
| Consistency | thick paste dense liquid |
| Storage and shelf life | Kerapoxy can be stored 24 months in a dry place in original packaging. Store component A at a temperature of at least +10°C to avoid crystallisation which, however, can be reversed by warming. |
| EMICODE | (as a grout): EC1 Plus - very low emission |
| Water absorption | 0.05 |
| Density | 1.64 0.97 g/cm³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Kerapoxy. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg, 5 kg, 9 kg, 1 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
45 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Kerapoxy can be stored 24 months in a dry place in original packaging. Store component A at a temperature of at least +10°C to avoid crystallisation which, however, can be reversed by warming. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Kerapoxy, a epoxy grout manufactured by Mapei, classified RG. Allow 0.16 kg/m2 on a 600x600x10 mm tile at a 3 mm joint, as published by the manufacturer. Supplied in 10 kg, 5 kg, 9 kg, 1 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Kerapoxy |
|---|---|
| Manufacturer | Mapei |
| Type | Epoxy Grout |
| Classification | RG |
| Consumption | 0.16 kg/m2 on a 600x600x10 mm tile at a 3 mm joint |
| Pack size | 10 kg, 5 kg, 9 kg, 1 kg |
| Set time | 24 hours |
| Pot life | 45 minutes |
| Open time | (as an adhesive): 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Kerapoxy is classified RG according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: joints of at least 1 mm
10 kg, 5 kg, 9 kg, 1 kg
You can download the official Kerapoxy technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Kerapoxy in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Kerapoxy you need, or describe the job and we will work it out with you.

