Kerapoxy Adhesive epoxy grout pack
Mapei's own picture. The pack we stock: 10 kg.

Mapei Epoxy GroutNo. 17 / 54

Kerapoxy Adhesive Technical Data Sheet (TDS)

Epoxy Grout to R2T.

Kerapoxy Adhesive is a two component epoxy adhesive from Mapei, classified R2T under EN 12004, an improved reactive adhesive with no vertical slip. It bonds ceramic, porcelain and stone on floors and walls over practically any substrate used in construction, achieving a rigid, chemical resistant, high strength connection.

  • Bonding ceramic, porcelain and stone on floors and walls
  • Fixing bullnose and special ceramic tile shapes
  • Tiling fibreglass swimming pools
  • Bonding marble doorsteps and windowsills
  • Chemically aggressive environments needing an epoxy bond
Data sheet1.5 MB

Build a list across products and send it once, or ask about Kerapoxy Adhesive on WhatsApp now.

Class
R2T
Consumption
1.5 kg/m² per mm
Pack we stock
10 kg
Colour
Grey, White

Mapei document 00144

About Kerapoxy Adhesive

Typical uses include bullnose and special ceramic shapes, tiles in fibreglass swimming pools, and marble doorsteps and windowsills, where cementitious adhesives either cannot grip or cannot deliver the required durability. The thixotropic consistency holds pieces in position on vertical surfaces while curing. For UAE fit outs involving chemically aggressive environments or non standard substrates, Kerapoxy Adhesive provides a dependable specification. Download the full technical data sheet on this page for pot life, hardening times and consumption data.

Documentation

Related documentation

  • Technical data sheet

    1.5 MB · PDF

    Kerapoxy Adhesive as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 10 mm.

As published in the data sheet

375kg

  • 1.5 kg/m2 per mm
  • 5 mm thick
  • over 50 m2

Order 38 packs of 10 kg kit, component A 8 kg plus component B 2 kg

Send this quantity for a quote

Taken from the Kerapoxy Adhesive data sheet: CONSUMPTION: consumption is 1.5 kg/m2 per millimetre of thickness. No site allowance is added unless you turn one on. Filed with the epoxy grouts but this is an adhesive, so it takes a rate per millimetre and not the joint formula. The sheet gives no recommended thickness, only that it is applied at a thickness of up to 1 cm in one single coat, so the 10 mm bound is the sheet's maximum and the 5 mm starting point is not a sheet figure.

Application

Where it is used.

  1. 01Bonding ceramic, porcelain and stone on floors and walls
  2. 02Fixing bullnose and special ceramic tile shapes
  3. 03Tiling fibreglass swimming pools
  4. 04Bonding marble doorsteps and windowsills
  5. 05Chemically aggressive environments needing an epoxy bond

Specification

Technical data.

  • R2T
  • EN 13888 and ISO 13007
Kerapoxy Adhesive technical specifications from the manufacturer TDS
ClassificationR2T
CoverageConsumption is 1.5 kg/m² per millimetre of thickness.
Pack size10 kg
Pot life45 minutes
Open time60 minutes
Adjustment time130 minutes
Set to light foot trafficafter 10-12 hours
ColoursGrey, White
Mixing ratiocomponent A : component B = 80 : 20
Application temperaturefrom +10°C to +30°C
Consistencythick paste
Storage and shelf lifeKerapoxy Adhesive remains stable for at least 24 months if stored in its original, sealed packaging.
Density1.8 1.4 g/cm³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Kerapoxy Adhesive. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 80 : 20. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

45 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Kerapoxy Adhesive remains stable for at least 24 months if stored in its original, sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Kerapoxy Adhesive, a epoxy grout manufactured by Mapei, classified R2T. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Mix at component A : component B = 80 : 20. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Kerapoxy Adhesive
ProductKerapoxy Adhesive
ManufacturerMapei
TypeEpoxy Grout
ClassificationR2T
Consumption1.5 kg/m2 per mm
Pack size10 kg
Mixing ratiocomponent A : component B = 80 : 20
Set timeafter 10-12 hours
Pot life45 minutes
Open time60 minutes
Unit of measurementm2

Frequently Asked Questions

Kerapoxy Adhesive is classified R2T according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Consumption is 1.5 kg/m² per millimetre of thickness.

10 kg

You can download the official Kerapoxy Adhesive technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Kerapoxy Adhesive in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Kerapoxy Adhesive you need, or describe the job and we will work it out with you.

Chat on WhatsApp