
Mapei Surface TreatmentNo. 01 / 47
Antipluviol Technical Data Sheet (TDS)
Mapei surface treatment.
Antipluviol is an impregnating water repellent rather than a membrane, and that distinction decides where it belongs. Water based and transparent, it soaks into very absorbent masonry and leaves a hydrophobic barrier inside the pores, so driving rain is shed while the wall still breathes and looks unchanged.
- Protecting very absorbent brickwork from driving rain
- Aerated concrete walls
- Renders and skim coats
- Natural and artificial stone facades
- Restoration of historic buildings
- Facades that must stay breathable and unchanged in appearance
Build a list across products and send it once, or ask about Antipluviol on WhatsApp now.
- Consumption
- 0.2 to 1 L/m²
- Pack we stock
- 25 kg
- Colour
- transparent
Mapei document 00326
About Antipluviol
Exposed brickwork, aerated concrete, renders, skim coats and natural or artificial stone are its substrates, which makes it a facade product and not something for a tank or a buried wall. Consumption follows absorbency, roughly 0.2 to 1 litre per square metre, with render or skim coat nearer 0.20 to 0.80 and tuff stone 0.50 to 1.00. The application window is +5°C to +35°C, so on a UAE site work the shaded elevation and follow the sun round rather than treating a wall that is already baking.
Documentation
Related documentation
Technical data sheet
0.8 MB · PDF
Antipluviol as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
15.0 to 50.0litres
- Exposed brickwork: 0.3 to 1 litre/m2
- over 50 m2
Order 1 to 2 packs of 25 litre jerrycan, also 5 litres
Taken from the Antipluviol data sheet: CONSUMPTION, approximate rates per single coat: exposed brickwork 0.30-1.0 L/m2, render or skim coat 0.20-0.80 L/m2, stone (tuff) 0.50-1.00 L/m2, aerated concrete 0.20-0.60 L/m2. No site allowance is added unless you turn one on. The sheet puts the overall range at approximately 0.2 to 1 L/m2 and prints the substrate rates per single coat, but the application section says to continue until the surface is fully saturated, applying multiple coats wet on wet, so the figure is a saturation consumption and is not multiplied by a coat count.
Application
Where it is used.
- 01Protecting very absorbent brickwork from driving rain
- 02Aerated concrete walls
- 03Renders and skim coats
- 04Natural and artificial stone facades
- 05Restoration of historic buildings
- 06Facades that must stay breathable and unchanged in appearance
Specification
Technical data.
| Coverage | The consumption ranges approximately from 0.2 to 1 L/m², depending on the absorbency of the substrate. Below are some materials with their approximate consumption rates per single coat: ▪ Exposed brickwork: 0.30-1.0 L/m² ▪ Render or skim coat: 0.20-0.80 L/m² ▪ Stone (tuff): 0.50-1.00 L/m² ▪ Aerated |
|---|---|
| Pack size | 25 kg, 25 l, 5 kg, 5 l |
| Colours | transparent |
| Application temperature | from +5°C to +35°C |
| Consistency | liquid |
| Storage and shelf life | 24 months in a dry place away from sources of heat at a temperature of between +5°C and +35°C. Protect from frost. |
| Density | approx. 1.02 g/cm³ |
Typical values as Mapei prints them in the data sheet for Antipluviol. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg, 25 l, 5 kg, 5 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in a dry place away from sources of heat at a temperature of between +5°C and +35°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Antipluviol, a surface treatment manufactured by Mapei. Allow 0.2 to 1 L/m2, as published by the manufacturer. Supplied in 25 kg, 25 l, 5 kg, 5 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Antipluviol |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Consumption | 0.2 to 1 L/m2 |
| Pack size | 25 kg, 25 l, 5 kg, 5 l |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: The consumption ranges approximately from 0.2 to 1 L/m², depending on the absorbency of the substrate. Below are some materials with their approximate consumption rates per single coat: ▪ Exposed brickwork: 0.30-1.0 L/m² ▪ Render or skim coat: 0.20-0.80 L/m² ▪ Stone (tuff): 0.50-1.00 L/m² ▪ Aerated
25 kg, 25 l, 5 kg, 5 l
You can download the official Antipluviol technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications

Mapeband
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Antipluviol in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Antipluviol you need, or describe the job and we will work it out with you.

