
Mapei WaterproofingNo. 04 / 47
Aquaflex Roof HR Technical Data Sheet (TDS)
Waterproofing to EN 1504-2 coating (C) principles PI, MC and IR.
Aquaflex Roof HR is a ready to use fibre filled liquid membrane in water emulsion for roofs that stay exposed. White, with a solar reflectance index of 105 to ASTM E1980, 83 per cent solar reflectance and 91 per cent emittance, the sheet states it lowers roof surface temperature by more than half against a dark coloured covering.
- Protection against UV rays and heat for existing distilled bitumen polymer membranes
- Protecting and waterproofing concrete roof surfaces
- Cementitious screeds and screeds made with Topcem or Topcem Pronto
- Waterproofing ceramic or stone roof coatings
- Reflective finishes that reduce the heat island effect of roofs
- Horizontal, sloping and vertical surfaces by roller, brush or airless spray
Build a list across products and send it once, or ask about Aquaflex Roof HR on WhatsApp now.
- Class
- EN 1504-2 coating (C) principles PI, MC and IR
- Consumption
- 0.5 to 2 kg/m²
- Pack we stock
- 20 kg
- Colour
- Highly reflective white
Mapei document 02152
About Aquaflex Roof HR
That is what separates it from the cementitious Mapelastic membranes in our range, which are laid to be tiled or screeded over. Two coats go on, 0.4 to 0.5 mm dry each and never less than 0.8 to 1 mm in total, at a minimum of 2 kg per square metre. Used only as a reflective protective finish over bitumen it drops to 0.5 kg on smooth and 0.9 kg on mineral filled membranes. Two limits decide the job: no membrane newer than six months, and no painted metal.
Documentation
Related documentation
Technical data sheet
1.3 MB · PDF
Aquaflex Roof HR as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
100kg
- Waterproof membrane: 2 kg/m2
- over 50 m2
Order 5 packs of 20 kg drums
Taken from the Aquaflex Roof HR data sheet: CONSUMPTION: Waterproof membrane: at least 2 kg/m2. Protective finish on bituminous membranes: approx. 0.5 kg/m2 on smooth membranes; approx. 0.9 kg/m2 on mineral-filled membranes. No site allowance is added unless you turn one on. The 2 kg/m2 membrane figure is the total for the two coats the sheet specifies, not a rate per coat, and the sheet quotes it as a minimum. Rows are in the sheet's printed order, so the first row is the heaviest and is the membrane build up the product is sold as. The sheet adds that the rates are for a seamless film on a flat surface and could be higher on uneven or absorbent substrates.
Application
Where it is used.
- 01Protection against UV rays and heat for existing distilled bitumen polymer membranes
- 02Protecting and waterproofing concrete roof surfaces
- 03Cementitious screeds and screeds made with Topcem or Topcem Pronto
- 04Waterproofing ceramic or stone roof coatings
- 05Reflective finishes that reduce the heat island effect of roofs
- 06Horizontal, sloping and vertical surfaces by roller, brush or airless spray
Specification
Technical data.
- EN 1504-2 coating (C) principles PI, MC and IR
- EN 14891
| Classification | EN 1504-2 coating (C) principles PI, MC and IR |
|---|---|
| Coverage | Waterproof membrane: at least 2 kg/m². Protective finish on bituminous membranes: approx. 0.5 kg/m² on smooth membranes; approx. 0.9 kg/m² on mineral-filled membranes. |
| Pack size | 20 kg drums |
| Set to light foot traffic | ready for use approx. 48 h at +23°C and 50% R.H. |
| Colours | Highly reflective white |
| Bond strength | adhesion to concrete 1.3 N/mm² after 28 days at +20°C and 50% R.H. (EN 1542) |
| Application temperature | from +5°C to +35°C |
| Consistency | paste |
| Storage and shelf life | up to 24 months in the original packaging in a dry place. Protect from frost. |
| Density | 1.35 g/cm³ |
| Dry solids | 61.4% |
| Viscosity | 19,000 mPa·s Brookfield (# 6 at 10 rpm) |
| Thickness | two coats around 0.4-0.5 mm dry each; dry thickness never less than 0.8-1 mm |
| Waiting time | approx. 5-6 h between Aquaflex Primer and the first coat; approx. 8 h between two coats at +23°C and 50% R.H. |
| Elongation | 200% at failure (ISO 37) |
| Tensile strength | 1.5 N/mm² (ISO 37) |
| Crack bridging | static class A4 at +23°C and at 0°C, dynamic class B2 at 0°C (EN 1062-7); dynamic class B4.2 at +23°C |
| Solar reflectance index | SRI 105 (ASTM E1980), solar reflectance 83% (ASTM E903), emittance 91% (ASTM C1371), certified by the EELab, University of Modena and Reggio Emilia |
| Watertightness | no water passage, EN 1928 at 60 kPa |
| Vapour resistance | SD = 1.38 m, class I permeable to vapour (EN ISO 7783-1) |
| Reaction to fire | B-s1-d0 (EN 13501-1); external fire exposure class Broof t1 (EN 13501-5) |
Typical values as Mapei prints them in the data sheet for Aquaflex Roof HR. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg drums. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
up to 24 months in the original packaging in a dry place. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Aquaflex Roof HR, a waterproofing manufactured by Mapei, classified EN 1504-2 coating (C) principles PI, MC and IR. Allow 0.5 to 2 kg/m2, as published by the manufacturer. Applied thickness two coats around 0.4-0.5 mm dry each; dry thickness never less than 0.8-1 mm. Supplied in 20 kg drums. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aquaflex Roof HR |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Classification | EN 1504-2 coating (C) principles PI, MC and IR |
| Consumption | 0.5 to 2 kg/m2 |
| Thickness | two coats around 0.4-0.5 mm dry each; dry thickness never less than 0.8-1 mm |
| Pack size | 20 kg drums |
| Set time | ready for use approx. 48 h at +23°C and 50% R.H. |
| Unit of measurement | m2 |
Frequently Asked Questions
Aquaflex Roof HR is classified EN 1504-2 coating (C) principles PI, MC and IR according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: Waterproof membrane: at least 2 kg/m². Protective finish on bituminous membranes: approx. 0.5 kg/m² on smooth membranes; approx. 0.9 kg/m² on mineral-filled membranes.
20 kg drums
You can download the official Aquaflex Roof HR technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications

Mapeband
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Aquaflex Roof HR in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aquaflex Roof HR you need, or describe the job and we will work it out with you.