
Mapei WaterproofingNo. 06 / 47
Lamposilex ME Technical Data Sheet (TDS)
Mapei waterproofing.
Few products on this line are bought for a single moment, but Lamposilex ME is one of them. It is an ultra fast setting hydraulic binder for stopping water leaks, a grey fine powder gauged in small amounts and pressed into a live leak in concrete or masonry, where it sets while the water is still running.
- Stopping running water leaks in concrete and masonry
- Below grade structures and post applied waterproofing
- Filling cavities where water is flowing
- Emergency sealing ahead of a permanent repair
- Small batch hand application
Build a list across products and send it once, or ask about Lamposilex ME on WhatsApp now.
- Consumption
- 1.8 kg per litre of void
- Pack we stock
- 5 kg
- Colour
- grey
Mapei document 02651 · revision 3-2022
About Lamposilex ME
Pot life at +20°C is about one minute, so the operative mixes what fits in a gloved hand and no more. Two figures to work from: 1.8 kg fills a one litre cavity, and it is sold in 5 kg packs that keep for twelve months stored indoors. Its place is post applied below grade waterproofing, where a leak has to be killed before the permanent system goes on. Keep a sealed pack in the site store before basement work starts, not after.
Documentation
Related documentation
Technical data sheet
Revision 3-2022 · 0.4 MB · PDF
Lamposilex ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Cracks and holes are cut out to a square section before filling, so the width and the depth are the chase you prepare, not the crack you found.
As published in the data sheet
7.20kg
- 20 by 20 mm chase over 10 m is 4 litres to fill
- 1.8 kg per litre of void
Order 2 packs of 5 kg drum
Taken from the Lamposilex ME data sheet: CONSUMPTION: 1.8 kg of Lamposilex ME will fill a one-dm3 cavity. APPLICATION PROCEDURE: enlarge the cracks or dovetail holes so that the wider part is towards the outside, the minimum external sizes must be about 2 cm in width and 2 cm in depth. PACKAGING: 5 kg drums. No site allowance is added unless you turn one on. The 20 by 20 mm chase is the sheet's own minimum, not its recommendation, so a dovetailed crack opened wider than that takes proportionally more. The sheet also asks for the wider part of the cut to face outwards.
Application
Where it is used.
- 01Stopping running water leaks in concrete and masonry
- 02Below grade structures and post applied waterproofing
- 03Filling cavities where water is flowing
- 04Emergency sealing ahead of a permanent repair
- 05Small batch hand application
Specification
Technical data.
- EN 14891
| Coverage | 1.8 kg of Lamposilex ME will fill a one-dm³ cavity. Cleaning Before it hardens, Lamposilex ME can be cleaned from tools with water. After setting, residues can be removed by mechanical means. |
|---|---|
| Pack size | 5 kg |
| Pot life | at +20°C: approx. 1 minute |
| Colours | grey |
| Consistency | fine powder |
| Storage and shelf life | Store the product in a dry place indoor for 12 months. |
| Density | 1100 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Lamposilex ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
at +20°C: approx. 1 minute. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Store the product in a dry place indoor for 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Lamposilex ME, a waterproofing manufactured by Mapei. Allow 1.8 kg per litre of void, as published by the manufacturer. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Lamposilex ME |
|---|---|
| Manufacturer | Mapei |
| Type | Waterproofing |
| Consumption | 1.8 kg per litre of void |
| Pack size | 5 kg |
| Pot life | at +20°C: approx. 1 minute |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.8 kg of Lamposilex ME will fill a one-dm³ cavity. Cleaning Before it hardens, Lamposilex ME can be cleaned from tools with water. After setting, residues can be removed by mechanical means.
5 kg
You can download the official Lamposilex ME technical data sheet as a PDF directly from this page, revision 3-2022, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Mapeband
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
Lamposilex ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Lamposilex ME you need, or describe the job and we will work it out with you.