
Mapei AccessoryNo. 07 / 47
Mapeband Technical Data Sheet (TDS)
Mapei accessory.
A cementitious membrane cannot turn an internal corner on its own, and Mapeband is the tape that lets it. An alkali resistant rubber tape with felt edging, 0.58 mm thick and 120 mm wide, it is bedded fabric side down into a layer of Mapelastic, Mapelastic Smart, Mapelastic Turbo or Mapelastic AquaDefense at least 1 mm thick, with the membrane wetting both flanks.
- Waterproofing corners between adjacent walls
- Corners between walls and floors
- Flexible waterproofing of expansion joints on terraces and balconies
- Sealing pipes and drains in bathrooms, showers and kitchens
- Sealing expansion joints in precast panels
Build a list across products and send it once, or ask about Mapeband on WhatsApp now.
- Supplied
- 50 m roll, 0.12 m wide, lapped 0 cm
- Pack we stock
- 12 cm, 50 m
- Thickness
- 0,58 mm
Mapei document 00337
About Mapeband
Ultimate elongation of at least 300 per cent and tear resistance of 100 N let a wall to floor junction move rather than split along the line, which is what an untaped junction eventually does. Over a movement joint the tape is set in an omega loop so it can be put in tension. Rolls run 50 m or 10 m, and joints between strips are sealed with Adesilex LP, not with the membrane. Service temperature reaches +60°C, enough for an exposed Dubai terrace.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapeband as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 50 m long, lapped 0 cm at each end.
As published in the data sheet
20.0m
- 20 m of detail
- plus 0 cm of lap at each roll end
Order 1 pack of 50 m roll, 120 mm wide
Taken from the Mapeband data sheet: PACKAGING: 50 m rolls of 120 mm total width. 10 m rolls of 120 mm total width. APPLICATION PROCEDURE: joints between Mapeband strips must be sealed with Adesilex LP or Adesilex PVC HP. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeband is an alkali resistant rubber tape with a felt edge bedded into Mapelastic or a similar membrane along a corner or an expansion joint, so it is measured by the metre of that detail. The figure is for the 50 m roll; a 10 m roll is also made. The sheet says joints between strips are sealed with Adesilex LP or Adesilex PVC HP but does not say by how much they lap. Nothing is added here for a lap between successive pieces, because the sheet prints none: that is a bound the sheet does not print, so allow for it on site. On a movement joint the tape is positioned in an omega shape, which takes more tape per metre of joint than this sum allows, and the sheet does not quantify that either. The 90 and 270 degree angles, the gaskets for 120 x 120 mm and 400 x 400 mm pipes, the 515 x 315 mm T profiles and the 515 x 515 mm cross profiles are counted off the drawing as pieces.
Application
Where it is used.
- 01Waterproofing corners between adjacent walls
- 02Corners between walls and floors
- 03Flexible waterproofing of expansion joints on terraces and balconies
- 04Sealing pipes and drains in bathrooms, showers and kitchens
- 05Sealing expansion joints in precast panels
Specification
Technical data.
| Pack size | 12 cm, 50 m |
|---|---|
| Application temperature | from -20°C to +60°C |
| Tensile strength | > 2 N/mm² |
| Tear resistance | ≥ 100 N |
| Vapour resistance | appox. 30,000 μ (± 30%) |
| Thickness | 0,58 mm |
Typical values as Mapei prints them in the data sheet for Mapeband. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
12 cm, 50 m. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply Mapeband, a accessory manufactured by Mapei. Allow 50 m roll, 0.12 m wide, lapped 0 cm, as published by the manufacturer. Applied thickness 0,58 mm. Supplied in 12 cm, 50 m. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeband |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Supplied | 50 m roll, 0.12 m wide, lapped 0 cm |
| Thickness | 0,58 mm |
| Pack size | 12 cm, 50 m |
| Unit of measurement | m2 |
Frequently Asked Questions
12 cm, 50 m
You can download the official Mapeband technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeband in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeband you need, or describe the job and we will work it out with you.