
Mapei Surface TreatmentNo. 02 / 47
Antipluviol S Technical Data Sheet (TDS)
Surface Treatment to CE EN 1504-2 C PI MC IR.
Choosing between the Antipluviol grades comes down to how absorbent the surface is, and Antipluviol S is the solvent based one for the tight surfaces. Its extremely high penetration gets it into compact natural stone such as marble, granite, limestone, sandstone and split face stone, and into unglazed ceramic tiles, where a water based repellent would struggle to enter at all.
- Water repellent protection for compact natural stone
- Marble, granite, limestone and sandstone cladding
- Split face stone facades
- Unglazed ceramic tiled elevations
- Restoration of historic buildings
- Low absorbency surfaces exposed to driving rain
Build a list across products and send it once, or ask about Antipluviol S on WhatsApp now.
- Class
- CE EN 1504-2 C PI MC IR
- Consumption
- 0.08 to 1 L/m²
- Pack we stock
- 10 kg
- Colour
- transparent
Mapei document 00327
About Antipluviol S
It builds a hydrophobic barrier within the material instead of a surface film, so rain is repelled without altering the appearance or the breathability of the cladding. Consumption is low on dense stone, around 0.10 to 0.15 litre per square metre on Carrara marble and Sardinian granite and 0.15 to 0.20 on compact sandstone. Being solvent based, ventilate enclosed UAE balconies and shafts while applying, and mask adjacent glazing and polished finishes first.
Documentation
Related documentation
Technical data sheet
0.6 MB · PDF
Antipluviol S as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
15.0 to 50.0litres
- Exposed brickwork: 0.3 to 1 litre/m2
- over 50 m2
Order 2 to 5 packs of 10 litre metal bucket, also 5 litres and 1 litre
Taken from the Antipluviol S data sheet: CONSUMPTION, approximate rates per single coat: compact sandstone 0.15-0.20 L/m2, Carrara marble 0.10-0.15 L/m2, Sardinian granite 0.10-0.15 L/m2, limestone (Botticino) 0.08-0.10 L/m2, exposed brickwork 0.30-1.00 L/m2, render or skim coat 0.25-0.80 L/m2, concrete blocks 0.12-0.50 L/m2. No site allowance is added unless you turn one on. The overall range is approximately 0.1 to 1.0 L/m2 and the rates are per single coat. The sheet says the treatment can be carried out in a single coat depending on the actual absorbency of the surface. The default is the highest consuming substrate on the list, so a dense stone job will quote well under it: pick the material before ordering.
Application
Where it is used.
- 01Water repellent protection for compact natural stone
- 02Marble, granite, limestone and sandstone cladding
- 03Split face stone facades
- 04Unglazed ceramic tiled elevations
- 05Restoration of historic buildings
- 06Low absorbency surfaces exposed to driving rain
Specification
Technical data.
- CE EN 1504-2 C PI MC IR
| Classification | CE EN 1504-2 C PI MC IR |
|---|---|
| Coverage | The consumption ranges approximately from 0.1 to 1.0 L/m², depending on the absorbency of the substrate. Below are some materials with their approximate consumption rates per single coat: ▪ Compact sandstone: 0.15-0.20 L/m ▪ Carrara marble: 0.10-0.15 L/m ▪ Sardinian granite: 0.10-0.15 L/m ▪ Limeston |
| Pack size | 10 kg |
| Colours | transparent |
| Application temperature | from +5°C to +30°C |
| Consistency | liquid |
| Storage and shelf life | Antipluviol S can be stored for 24 months in a dry and covered place, away from sources of heat and naked fiames, at a temperature between +5°C and +30°C. 2 2 2 2 2 2 |
| Density | approx. 0.80 g/cm³ |
Typical values as Mapei prints them in the data sheet for Antipluviol S. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Antipluviol S can be stored for 24 months in a dry and covered place, away from sources of heat and naked fiames, at a temperature between +5°C and +30°C. 2 2 2 2 2 2 in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Antipluviol S, a surface treatment manufactured by Mapei, classified CE EN 1504-2 C PI MC IR. Allow 0.08 to 1 L/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Antipluviol S |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | CE EN 1504-2 C PI MC IR |
| Consumption | 0.08 to 1 L/m2 |
| Pack size | 10 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Antipluviol S is classified CE EN 1504-2 C PI MC IR according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: The consumption ranges approximately from 0.1 to 1.0 L/m², depending on the absorbency of the substrate. Below are some materials with their approximate consumption rates per single coat: ▪ Compact sandstone: 0.15-0.20 L/m ▪ Carrara marble: 0.10-0.15 L/m ▪ Sardinian granite: 0.10-0.15 L/m ▪ Limeston
10 kg
You can download the official Antipluviol S technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications

Mapeband
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Antipluviol S in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Antipluviol S you need, or describe the job and we will work it out with you.

