
Mapei Surface TreatmentNo. 05 / 47
Elastocolor Paint Technical Data Sheet (TDS)
Surface Treatment to CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB.
A render carrying hairline cracks will telegraph them through an ordinary masonry paint within a season. Elastocolor Paint is the elastomeric answer: a one-component acrylic in water dispersion that bridges micro-cracks, stays permeable to vapour while stopping liquid water, and blocks the carbon dioxide that carbonates concrete and corrodes the steel inside it.
- Facades with cracks and micro-cracks
- Concrete structures subject to small deformation
- Anti-carbonation protection of concrete
- Render already painted and micro-cracked
- Elevations attacked by moulds and algae
- Indoor and outdoor wall surfaces
Build a list across products and send it once, or ask about Elastocolor Paint on WhatsApp now.
- Class
- CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
- Consumption
- 0.4 to 0.8 kg/m² over 2 coats
- Pack we stock
- 20 kg
- Colour
- RAL 1001, RAL 1013, RAL 1015, RAL 1017, RAL 3003, RAL 5012, RAL 6002, RAL 7032
Mapei document 06644
About Elastocolor Paint
Testing to EN 15457 and EN 15458 records no growth of mould, fungi or algae, which is the reason it gets specified on shaded and humid elevations. Dilute 10 to 15 per cent with water and lay two coats over the correct primer, 12 to 24 hours apart, at 0.2 to 0.4 kg per square metre per coat. Mapei excludes it from horizontal waterproofing, immersed surfaces and anything walked on. Supplied in 20 kg drums in RAL shades, holding colour change under 2.5 delta E after 1,000 hours of accelerated weathering, which counts on a Gulf facade.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Elastocolor Paint as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 2 to 3.
As published in the data sheet
20.0 to 40.0kg
- Per coat: 0.2 to 0.4 kg/m2
- 2 coats
- over 50 m2
Order 1 to 2 packs of 20 kg recycled plastic drum
Taken from the Elastocolor Paint data sheet: CONSUMPTION: under normal conditions the consumption rate is around 0.2-0.4 kg/m2 per coat. No site allowance is added unless you turn one on. Applied by brush or roller the sheet requires at least 2 coats for good cover, waiting 12 to 24 hours between them. Coverage depends heavily on the roughness and porosity of the substrate and on the tool used.
Application
Where it is used.
- 01Facades with cracks and micro-cracks
- 02Concrete structures subject to small deformation
- 03Anti-carbonation protection of concrete
- 04Render already painted and micro-cracked
- 05Elevations attacked by moulds and algae
- 06Indoor and outdoor wall surfaces
Specification
Technical data.
- CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
| Classification | CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB |
|---|---|
| Coverage | Coverage is highly depending on the roughness and porosity of the substrate and on the type of tool used for the application. Under normal conditions the consumption rate is around 0.2-0.4 kg/m² per coat. |
| Pack size | 20 kg |
| Set to light foot traffic | 12-24 hours according to humidity and temperature |
| Colours | RAL 1001, RAL 1013, RAL 1015, RAL 1017, RAL 3003, RAL 5012, RAL 6002, RAL 7032 |
| Application temperature | from +5°C to +35°C |
| Storage and shelf life | 24 months in a dry place away from sources of heat at a temperature of between +5°C and +30°C. Protect from frost. |
Typical values as Mapei prints them in the data sheet for Elastocolor Paint. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in a dry place away from sources of heat at a temperature of between +5°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Elastocolor Paint, a surface treatment manufactured by Mapei, classified CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB. Allow 0.4 to 0.8 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Elastocolor Paint |
|---|---|
| Manufacturer | Mapei |
| Type | Surface Treatment |
| Classification | CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB |
| Consumption | 0.4 to 0.8 kg/m2 over 2 coats |
| Pack size | 20 kg |
| Set time | 12-24 hours according to humidity and temperature |
| Unit of measurement | m2 |
Frequently Asked Questions
Elastocolor Paint is classified CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Coverage is highly depending on the roughness and porosity of the substrate and on the type of tool used for the application. Under normal conditions the consumption rate is around 0.2-0.4 kg/m² per coat.
20 kg
You can download the official Elastocolor Paint technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Lamposilex ME
View TDS and specifications

Mapeband
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Elastocolor Paint in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Elastocolor Paint you need, or describe the job and we will work it out with you.

