Mapeband Easy H130 accessory pack
Mapei's own picture of Mapeband Easy H130.

Mapei AccessoryNo. 08 / 47

Mapeband Easy H130 Technical Data Sheet (TDS)

Mapei accessory.

Mapeband Easy is the 130 mm wide joint tape in the Mapei waterproofing range: a vapour proof, waterproof rubber core sandwiched between two layers of alkali resistant non woven polypropylene, 0.68 mm thick and 285 g/m2, perforated along both edges so the membrane keys through the fabric instead of sitting on it. Against Mapeband, which is 120 mm wide, thinner at 0.58 mm and needs Adesilex LP at the laps, Mapeband Easy is lapped at least 5 cm and bonded with the same waterproofing product as the rest of the detail.

  • Waterproofing corners between adjacent walls
  • Corners between walls and floors
  • Waterproof elastic control joints on terraces and balconies
  • Control joints in swimming pools
  • Sealing around pipework using the Mapeband Easy templates
  • Bridging screed control joints under tiles, stone or mosaics
Data sheet1.4 MB

Build a list across products and send it once, or ask about Mapeband Easy H130 on WhatsApp now.

Supplied
30 m roll, 0.13 m wide, lapped 5 cm
Pack we stock
Rolls of 30 m by 130 mm, also 10 m by 130 mm
Thickness
0.68 mm (EN 1849-2)

Mapei document 07631

About Mapeband Easy H130

It works with the Mapelastic range, Monolastic, Mapegum WPS, the Aquaflex Roof range and Mapeguard UM35. Over a screed control joint that will be tiled, leave the dotted centre strip uncoated and break any reinforcing mesh at the tape edges so the joint can still move. Tensile strength is 45 N per 15 mm at 315 per cent elongation.

Documentation

Related documentation

  • Technical data sheet

    1.4 MB · PDF

    Mapeband Easy H130 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

m

Rolls are 30 m long, lapped 5 cm at each end.

As published in the data sheet

20.0m

  • 20 m of detail
  • plus 5 cm of lap at each roll end

Order 1 pack of 30 m roll, 130 mm wide

Send this quantity for a quote

Taken from the Mapeband Easy H130 data sheet: PACKAGING: 30 m long by 130 mm wide rolls. 10 m long by 130 mm wide rolls. APPLICATION PROCEDURE: joints between different pieces of Mapeband Easy must overlap at least 5 cm and be bonded with the chosen waterproofing product. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeband Easy H130 is a tape bedded into the chosen waterproofing product along a corner, an edge or a control joint, so it is measured by the metre of that detail. The figure is for the 30 m roll; a 10 m roll is also made. Only the 5 cm lap at the end of each roll is counted here. The 90 and 270 degree pre formed pieces and the templates for 200 x 200 mm and 400 x 400 mm through holes are counted off the drawing as pieces, and the waterproofing product it is bedded into is a separate product with its own rate.

Application

Where it is used.

  1. 01Waterproofing corners between adjacent walls
  2. 02Corners between walls and floors
  3. 03Waterproof elastic control joints on terraces and balconies
  4. 04Control joints in swimming pools
  5. 05Sealing around pipework using the Mapeband Easy templates
  6. 06Bridging screed control joints under tiles, stone or mosaics

Specification

Technical data.

  • EMICODE EC1 Plus - very low emission
Mapeband Easy H130 technical specifications from the manufacturer TDS
Pack sizeRolls of 30 m by 130 mm, also 10 m by 130 mm
EMICODEEC1 Plus - very low emission
Thickness0.68 mm (EN 1849-2)
Weight285 g/m2 (EN 1849-2)
Tensile strength45 N/15 mm (EN ISO 527-3)
Elongation at failure315 % (EN ISO 527-1)
MaterialRubber sandwiched between two layers of non woven polypropylene fabric

Typical values as Mapei prints them in the data sheet for Mapeband Easy H130. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

Rolls of 30 m by 130 mm, also 10 m by 130 mm. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

For quantity surveyors

BOQ clause.

Supply and apply Mapeband Easy H130, a accessory manufactured by Mapei. Allow 30 m roll, 0.13 m wide, lapped 5 cm, as published by the manufacturer. Applied thickness 0.68 mm (EN 1849-2). Supplied in rolls of 30 m by 130 mm, also 10 m by 130 mm. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapeband Easy H130
ProductMapeband Easy H130
ManufacturerMapei
TypeAccessory
Supplied30 m roll, 0.13 m wide, lapped 5 cm
Thickness0.68 mm (EN 1849-2)
Pack sizeRolls of 30 m by 130 mm, also 10 m by 130 mm
Unit of measurementm2

Frequently Asked Questions

Rolls of 30 m by 130 mm, also 10 m by 130 mm

You can download the official Mapeband Easy H130 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapeband Easy H130 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeband Easy H130 you need, or describe the job and we will work it out with you.

Chat on WhatsApp