
Mapei AccessoryNo. 09 / 47
Mapeband Flex Roll Technical Data Sheet (TDS)
Mapei accessory.
Movement joints and live cracks are where most waterproofing fails, and Mapeband Flex Roll exists to cover them properly. It is a light grey flexible tape, 2.0 mm thick and supplied in 20 metre rolls, bedded into the waterproofing system over expansion joints and cracks so the membrane can carry on across a gap that keeps moving.
- Flexible waterproofing of expansion joints
- Bridging live cracks within a waterproofing system
- Hydraulic structures and water retaining works
- Tanks, reservoirs and sewer pipes
- Bridge decks
- Post applied below grade waterproofing
Build a list across products and send it once, or ask about Mapeband Flex Roll on WhatsApp now.
- Supplied
- 20 m roll, 0.15 m wide, lapped 3 cm
- Pack we stock
- 20 m
- Colour
- light grey
Mapei document 02151
About Mapeband Flex Roll
Elongation at failure is at least 400 per cent both lengthways and across, which is what lets it absorb movement instead of resisting it. Mapei lists it for hydraulic structures, tanks, reservoirs, sewer pipes, bridge decks and post applied below grade waterproofing, so this is detailing material for heavy civil and water retaining work rather than a bathroom tape. Store the rolls dry, dust free and away from aggressive chemicals, which on a UAE site means off the slab and out of the sun.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapeband Flex Roll as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
Rolls are 20 m long, lapped 3 cm at each end.
As published in the data sheet
20.0m
- 20 m of detail
- plus 3 cm of lap at each roll end
Order 2 packs of 20 m roll, 150 mm wide
Taken from the Mapeband Flex Roll data sheet: PACKAGING: width 150/200/300/400/600/800 mm; thickness 2 mm; length of roll 20 m. APPLICATION PROCEDURE: when the pieces of tape are joined by heat welding, overlap the edges by at least 30 mm. No site allowance is added unless you turn one on. The sheet publishes no consumption rate because nothing is spread: Mapeband Flex Roll is a 2 mm thick TPE tape bonded over a structural joint in two 1 to 2 mm layers of Adesilex PG1, PG2 or PG4, so it is measured by the metre of joint. The figure is for the narrowest roll, 150 mm wide; the sheet also lists 200, 300, 400, 600 and 800 mm, all on a 20 m roll, and the width comes off the joint detail. Only the 30 mm lap at the end of each roll is counted here. The epoxy it is bedded into is a separate product with its own rate.
Application
Where it is used.
- 01Flexible waterproofing of expansion joints
- 02Bridging live cracks within a waterproofing system
- 03Hydraulic structures and water retaining works
- 04Tanks, reservoirs and sewer pipes
- 05Bridge decks
- 06Post applied below grade waterproofing
Specification
Technical data.
| Pack size | 20 m |
|---|---|
| Colours | light grey |
| Storage and shelf life | Store Mapeband Flex Roll in a dry, dust-free area protected from aggressive chemicals at a temperature of -5°C to +35°C. |
| Elongation | at failure (EN 12311-2) (%): ≥ 400 (longitudinal and transversal) |
| Tensile strength | ≥ 8 (longitudinal) MPa |
| Thickness | 2.0 mm |
Typical values as Mapei prints them in the data sheet for Mapeband Flex Roll. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 m. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store Mapeband Flex Roll in a dry, dust-free area protected from aggressive chemicals at a temperature of -5°C to +35°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeband Flex Roll, a accessory manufactured by Mapei. Allow 20 m roll, 0.15 m wide, lapped 3 cm, as published by the manufacturer. Applied thickness 2.0 mm. Supplied in 20 m. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeband Flex Roll |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Supplied | 20 m roll, 0.15 m wide, lapped 3 cm |
| Thickness | 2.0 mm |
| Pack size | 20 m |
| Unit of measurement | m2 |
Frequently Asked Questions
20 m
You can download the official Mapeband Flex Roll technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeband Flex Roll in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeband Flex Roll you need, or describe the job and we will work it out with you.