
Mapei AccessoryNo. 10 / 47
Mapeband Gasket Technical Data Sheet (TDS)
Mapei accessory.
The drain outlet is the commonest point of failure in a wet room, because the membrane has to stop dead at a hole and still be watertight. Mapeband Gasket is the preformed answer: a square of the same alkali resistant rubber used for Mapeband tape, supplied at 120 by 120 mm for pipes and 400 by 400 mm for drain outlets, pressed into fresh Mapelastic, Mapelastic Smart, Mapelastic Turbo or Mapelastic AquaDefense so the coating wets it on both faces.
- Sealing pipes in bathrooms, showers and kitchens
- Sealing drain outlets in wet rooms
- Mapelastic and Mapelastic Smart waterproofing systems
- Mapelastic Turbo and Mapelastic AquaDefense systems
- Waterproofing corners between walls and floors
Build a list across products and send it once, or ask about Mapeband Gasket on WhatsApp now.
- Pack we stock
- 120 x 120 mm pipe gaskets, 400 x 400 mm drain outlet gaskets
- Thickness
- 0,58 mm
Mapei document 00337
About Mapeband Gasket
At 0.58 mm thick, with tensile strength above 2 N/mm² and tear resistance of 100 N, it holds the collar around a waste while the floor around it moves. Service temperature runs from -20°C to +60°C. On a UAE hotel bathroom refit, gasket every waste before the screed is tiled: nothing at that detail is reachable afterwards.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapeband Gasket as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
A preformed gasket from the Mapeband range, counted off the drawing as pieces rather than calculated: the sheet lists gaskets for 120 x 120 mm and 400 x 400 mm pipes, 90 and 270 degree angles, 515 x 315 mm T profiles and 515 x 515 mm cross profiles. A piece seals one pipe or one corner, so the quantity is a count taken from the drawing and there is no length or area to multiply. The 50 m and 10 m rolls of 120 mm band on the same sheet are the Mapeband tape, which has its own roll calculator, and the cementitious membrane the gasket is bedded into is a separate product with its own rate.
There is no area calculator for Mapeband Gasket because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Sealing pipes in bathrooms, showers and kitchens
- 02Sealing drain outlets in wet rooms
- 03Mapelastic and Mapelastic Smart waterproofing systems
- 04Mapelastic Turbo and Mapelastic AquaDefense systems
- 05Waterproofing corners between walls and floors
Specification
Technical data.
| Pack size | 120 x 120 mm pipe gaskets, 400 x 400 mm drain outlet gaskets |
|---|---|
| Application temperature | from -20°C to +60°C |
| Tensile strength | > 2 N/mm² |
| Tear resistance | ≥ 100 N |
| Vapour resistance | appox. 30,000 μ (± 30%) |
| Thickness | 0,58 mm |
Typical values as Mapei prints them in the data sheet for Mapeband Gasket. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
120 x 120 mm pipe gaskets, 400 x 400 mm drain outlet gaskets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply Mapeband Gasket, a accessory manufactured by Mapei. Applied thickness 0,58 mm. Supplied in 120 x 120 mm pipe gaskets, 400 x 400 mm drain outlet gaskets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeband Gasket |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Thickness | 0,58 mm |
| Pack size | 120 x 120 mm pipe gaskets, 400 x 400 mm drain outlet gaskets |
| Unit of measurement | m2 |
Frequently Asked Questions
120 x 120 mm pipe gaskets, 400 x 400 mm drain outlet gaskets
You can download the official Mapeband Gasket technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Antipluviol
View TDS and specifications

Antipluviol S
CE EN 1504-2 C PI MC IR
View TDS and specifications

Antipluviol W
View TDS and specifications

Aquaflex Roof HR
EN 1504-2 coating (C) principles PI, MC and IR
View TDS and specifications

Elastocolor Paint
CE EN 1504-2 C PI MC IR, EN 15457 GB, EN 15458 GB
View TDS and specifications

Lamposilex ME
View TDS and specifications
All WaterproofingEvery Mapei product and the distributor page
Mapeband Gasket in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeband Gasket you need, or describe the job and we will work it out with you.