webertherm Base plaster pack
Weber (Saint-Gobain)'s own picture. The pack we stock: 25 kg.

Weber (Saint-Gobain) PlasterNo. 08 / 9

webertherm Base Technical Data Sheet (TDS)

Facade

webertherm base is a pre-bagged dry blend of cement, aggregates, polymer, and additives. It provides an excellent reinforcing coat for embedding glass fiber mesh in External Façades Insulation Composite System (ETICS) or directly on Glasroc X (from Saint-Gobain Gyproc) a special Gypsum boards designed for external applications.

  • Plastering and rendering walls
  • Skimming before decoration
Data sheet0.2 MB

Build a list across products and send it once, or ask about webertherm Base on WhatsApp now.

Consumption
3 to 4 kg/m²
Pack we stock
25 kg

About webertherm Base

It is deformable, crack-proof and resistant to mechanical stress. webertherm base has an outstanding bonding effect and is water resistant. The sheet gives consumption as 3 to 4kg/m2 per coat. It is supplied in the UAE in 25kg. Pot life is given as 2hrs at 20°C. Open time is given as 25min. at 20°C. Shelf life is 12 months in the unopened pack. webertherm Base sits in Weber's plasters and renders range, made for the Gulf by Saint-Gobain through SODAMCO. Lapiz Blue supplies webertherm Base across the UAE from Dubai, Abu Dhabi and Sharjah.

Documentation

Related documentation

  • Technical data sheet

    Revision 07.25 · 0.2 MB · PDF

    webertherm Base as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

150 to 200kg

  • 3 to 4kg/m2 per coat: 3 to 4 kg/m2
  • over 50 m2

Order 6 to 8 packs of 25 kg bag

Send this quantity for a quote

Taken from the webertherm Base data sheet: 3 to 4kg/m2 per coat. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Plastering and rendering walls
  2. 02Skimming before decoration

Where it is not the right product

  • On external walls, where a cementitious plaster is required
  • In bathrooms, kitchens or any permanently wet area

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 998-1
webertherm Base technical specifications from the manufacturer TDS
Coverage3 to 4kg/m2 per coat
Pack size25kg
Pot life2hrs at 20°C
Open time25min. at 20°C
Storage and shelf life12 months
AppearancePowder
Sual assessmentNo cracking, no blistering,
Nsile adhesionComplies
Pact testComplies
Product typeFacade

Typical values as Weber (Saint-Gobain) prints them in the data sheet for webertherm Base. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

2hrs at 20°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply webertherm Base, a plaster manufactured by Weber (Saint-Gobain). Facade. Allow 3 to 4 kg/m2, as published by the manufacturer. Supplied in 25kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for webertherm Base
Productwebertherm Base
ManufacturerWeber (Saint-Gobain)
TypePlaster
Consumption3 to 4 kg/m2
Pack size25kg
Pot life2hrs at 20°C
Open time25min. at 20°C
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 3 to 4kg/m2 per coat

25kg

You can download the official webertherm Base technical data sheet as a PDF directly from this page, revision 07.25, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

webertherm Base in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of webertherm Base you need, or describe the job and we will work it out with you.

Chat on WhatsApp