
Weber (Saint-Gobain) PlasterNo. 09 / 9
webertherm Glue Technical Data Sheet (TDS)
Plasters and renders
webertherm glue is a pre-mixed dry blend of cement, fillers, polymer, and additives. It is resistant to mechanical stress and has an outstanding bonding effect and is water resistant.
- Plastering and rendering walls
- Skimming before decoration
Build a list across products and send it once, or ask about webertherm Glue on WhatsApp now.
- Consumption
- 4 kg/m²
- Pack we stock
- 25 kg
About webertherm Glue
Surface must be clean and free from greasy matters or dust. Mix webertherm glue in the proportion of 6 liters of clean cool water per 25kg bag. An electric mixer with low rotation speed (<300rpm) can be used. Mix until a uniform lump free paste is obtained. Let the paste rest for a few minutes before starting the application. Apply the webertherm glue mixture on the back side of the insulation board (Mineral wool such as webertherm SW or EPS). The sheet gives consumption as 4kg/m2 depending on:. It is supplied in the UAE in 25kg. Lapiz Blue supplies webertherm Glue across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 11.20 · 0.2 MB · PDF
webertherm Glue as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
200kg
- 4kg/m2 depending on: 4 kg/m2
- over 50 m2
Order 8 packs of 25 kg bag
Taken from the webertherm Glue data sheet: 4kg/m2 depending on: surface irregularity, webertherm SW thickness and size, and method of application. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Plastering and rendering walls
- 02Skimming before decoration
Specification
Technical data.
- EN 998-1
| Coverage | 4kg/m2 depending on: |
|---|---|
| Pack size | 25kg |
| Pot life | 2hrs at standard condition |
| Open time | 25min at standard condition |
| Mixing ratio | 6 lit per 25kg |
| Storage and shelf life | 6 months (as stated in the CHARACTERISTICS table) |
| Appearance | Powder |
| Composition | Cement, siliceous sand and additives |
| Color | Grey |
| Density | 1.55kg/lit.±0.05 |
| Shelf life | 6 months |
| Ter 28 days standard | Complies |
| Ndition 2 days water | company that the product is suitable for the intended use,and |
| Tructions for use | the company’s office in your location. |
| Product type | Plasters and renders |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for webertherm Glue. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
6 lit per 25kg. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
2hrs at standard condition. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
6 months (as stated in the CHARACTERISTICS table) in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply webertherm Glue, a plaster manufactured by Weber (Saint-Gobain). Plasters and renders. Allow 4 kg/m2, as published by the manufacturer. Mix at 6 lit per 25kg. Supplied in 25kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | webertherm Glue |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Plaster |
| Consumption | 4 kg/m2 |
| Pack size | 25kg |
| Mixing ratio | 6 lit per 25kg |
| Pot life | 2hrs at standard condition |
| Open time | 25min at standard condition |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 4kg/m2 depending on:
25kg
You can download the official webertherm Glue technical data sheet as a PDF directly from this page, revision 11.20, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weberpremix Skim Coat
View TDS and specifications

weberpremix SP 11
View TDS and specifications

weberpremix SP 33
View TDS and specifications

weberpremix SP 5
View TDS and specifications

weberpremix SRC 1
View TDS and specifications

weberpremix SRC 2
Class A1 (fire resistance per EN 998-1)
View TDS and specifications
All Plasters and RendersEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
webertherm Glue in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of webertherm Glue you need, or describe the job and we will work it out with you.