
Mapei Bonding AgentNo. 02 / 53
Adesilex PG2 TG Technical Data Sheet (TDS)
Mapei bonding agent.
The TG in Adesilex PG2 TG stands for the temperature band it is built for: a two component thixotropic epoxy adhesive especially suitable for application between 25 and 50 degrees, where a standard structural epoxy would stiffen before it could be worked. For a UAE summer that is the whole argument.
- Structural bonding at temperatures between +25°C and +50°C
- Bonding steel or composite plates to concrete
- Rigid structural bonding of precast elements
- Sealing large cracks in trafficked industrial flooring
- General reprofiling over large areas up to 3 mm
- Filling pinholes before epoxy and polyurethane flooring
Build a list across products and send it once, or ask about Adesilex PG2 TG on WhatsApp now.
- Consumption
- 1.71 kg/m² per mm
- Pack we stock
- 6 kg
- Colour
- grey
Mapei document 00379
About Adesilex PG2 TG
It bonds and reinforces concrete, natural stone, mortar and brick, carries steel or composite plates onto concrete, bonds precast elements rigidly, seals injection ports and large cracks in trafficked industrial flooring, bonds waterproofing strips and fills pinholes before epoxy and polyurethane flooring systems. It reprofiles large areas up to 3 mm and builds 1 cm in a single layer. Mixed at 3 parts A to 1 part B, consumption is 1.71 kg per square metre per millimetre, and pot life after preconditioning at 50 degrees is 20 minutes.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Adesilex PG2 TG as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 10 mm.
As published in the data sheet
257kg
- 1.71 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 43 packs of 6 kg kit, 4.5 kg part A plus 1.5 kg part B
Taken from the Adesilex PG2 TG data sheet: CONSUMPTION: 1.71 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The sheet prints general reprofiling over large areas up to 3 mm, which is the default here, and allows thicknesses up to 1 cm in a single layer on vertical structures.
Application
Where it is used.
- 01Structural bonding at temperatures between +25°C and +50°C
- 02Bonding steel or composite plates to concrete
- 03Rigid structural bonding of precast elements
- 04Sealing large cracks in trafficked industrial flooring
- 05General reprofiling over large areas up to 3 mm
- 06Filling pinholes before epoxy and polyurethane flooring
Specification
Technical data.
| Coverage | 1.71 kg/m² per mm of thickness. |
|---|---|
| Pack size | 6 kg |
| Pot life | 20 minutes (after preconditioning at +50°C) |
| Colours | grey |
| Mixing ratio | component A : component B = 3 : 1 |
| Application temperature | from +25°C to +50°C |
| Consistency | thick paste |
| Storage and shelf life | 24 months in their original packaging. Store the product at temperatures not below +10°C. |
| Density | 1.70 1.80 kg/L |
Typical values as Mapei prints them in the data sheet for Adesilex PG2 TG. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
6 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 3 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
20 minutes (after preconditioning at +50°C). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
24 months in their original packaging. Store the product at temperatures not below +10°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Adesilex PG2 TG, a bonding agent manufactured by Mapei. Allow 1.71 kg/m2 per mm, as published by the manufacturer. Mix at component A : component B = 3 : 1. Supplied in 6 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Adesilex PG2 TG |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Consumption | 1.71 kg/m2 per mm |
| Pack size | 6 kg |
| Mixing ratio | component A : component B = 3 : 1 |
| Pot life | 20 minutes (after preconditioning at +50°C) |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.71 kg/m² per mm of thickness.
6 kg
You can download the official Adesilex PG2 TG technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 2400
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Adesilex PG2 TG in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Adesilex PG2 TG you need, or describe the job and we will work it out with you.

