
Mapei Bonding AgentNo. 06 / 53
Dynamon SR 1200 Technical Data Sheet (TDS)
Bonding Agent to ASTM C494, EN 934-2.
Dynamon SR1200 is a chloride free superplasticising admixture based on polymer modified polycarboxylate ether, dosed into the mix at the batching plant rather than applied to finished concrete. It complies with ASTM C494 as Type G and with EN 934-2.
- Self compacting concrete in heavily reinforced and congested sections
- High performance concrete with very low water to cement ratios
- Precast elements requiring increased early and ultimate strengths
- Fly ash, silica fume, GGBS and tri-blend mixes
- Piling mixes and raft foundations
- Pouring in hot climates
Build a list across products and send it once, or ask about Dynamon SR 1200 on WhatsApp now.
- Class
- ASTM C494, EN 934-2
- Dosage
- 0.5 to 2 litre per 100 kg of cement
- Pack we stock
- 200 l
- Colour
- amber
Mapei document 06385
About Dynamon SR 1200
The choice between it and the rest of the Dynamon range rests on what the mix has to do: SR1200 is formulated for very low water to cement ratios with long slump retention in hot climates, so it suits self compacting concrete in heavily reinforced and congested sections, piling mixes, raft foundations and precast where early strength counts. Typical dosage is 0.5 to 2.0 litres per 100 kg of total cementitious material, with the optimum settled by site trials on the actual cement and aggregates. On a UAE summer pour, slump retention is what gets the last truck placed.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Dynamon SR 1200 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
0.5 to 2.0 litres per 100 kg of total cementitious material
As published in the data sheet
5.00 to 20.0litres
- 0.5 to 2 litre per 100 kg of cement
- 1000 kg of cement
Order 1 pack of 200 litre drum
Taken from the Dynamon SR 1200 data sheet: DOSAGE: typical dosage rates range from 0.5 to 2.0 liters/100 kg of total cementitious material. No site allowance is added unless you turn one on. The sheet says the optimum dosage for a given job should be determined by site trials using the selected cement, cement replacement materials and aggregates, and that other dosage rates may be considered subject to trials. The dose is against the total cementitious material, not the cement on its own. Supplied in 200 litre drums, 1000 litre IBC containers and in bulk upon request.
Application
Where it is used.
- 01Self compacting concrete in heavily reinforced and congested sections
- 02High performance concrete with very low water to cement ratios
- 03Precast elements requiring increased early and ultimate strengths
- 04Fly ash, silica fume, GGBS and tri-blend mixes
- 05Piling mixes and raft foundations
- 06Pouring in hot climates
Specification
Technical data.
- ASTM C494, EN 934-2
| Classification | ASTM C494, EN 934-2 |
|---|---|
| Pack size | 200 litre drums, 1000 litre IBCs, or in bulk |
| Colours | amber |
| Consistency | liquid |
| Storage and shelf life | Dynamon SR1200 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. |
| Ph | 5.0±1.5 |
| Density | 1.05±0.02 at +25°C |
Typical values as Mapei prints them in the data sheet for Dynamon SR 1200. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
200 litre drums, 1000 litre IBCs, or in bulk. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Dynamon SR1200 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Dynamon SR 1200, a bonding agent manufactured by Mapei, classified ASTM C494, EN 934-2. Allow 0.5 to 2 litre per 100 kg of cement, as published by the manufacturer. Supplied in 200 litre drums, 1000 litre ibcs, or in bulk. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Dynamon SR 1200 |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Classification | ASTM C494, EN 934-2 |
| Dosage | 0.5 to 2 litre per 100 kg of cement |
| Pack size | 200 litre drums, 1000 litre IBCs, or in bulk |
| Unit of measurement | m2 |
Frequently Asked Questions
Dynamon SR 1200 is classified ASTM C494, EN 934-2 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
200 litre drums, 1000 litre IBCs, or in bulk
You can download the official Dynamon SR 1200 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 2400
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Dynamon SR 1200 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Dynamon SR 1200 you need, or describe the job and we will work it out with you.

