
Mapei Bonding AgentNo. 04 / 53
Dynamon MR 2100 Technical Data Sheet (TDS)
Bonding Agent to ASTM C494, EN 934-2.
Dynamon MR2100 is a chloride free hyperplasticising admixture based on polymer modified polycarboxylate ether, added to the mix at the batching plant and not to be confused with anything applied to hardened concrete. It conforms to ASTM C494 as Type G and to EN 934-2, and is aimed at ready mix plants producing high performance concrete by cutting the water to cement ratio.
- High performance concrete needing exceptional workability and durability
- Precast elements requiring increased early and ultimate strengths
- Mixes containing fly ash, silica fume, GGBS and tri-blends
- Mass concrete pours needing improved cohesion
- Piling mixes and raft foundations
- Pouring in hot climates
Build a list across products and send it once, or ask about Dynamon MR 2100 on WhatsApp now.
- Class
- ASTM C494, EN 934-2
- Dosage
- 0.8 to 2.5 litre per 100 kg of cement
- Pack we stock
- 1000 l
- Colour
- amber
Mapei document 06863 · revision 10-2019
About Dynamon MR 2100
What decides its use is the mix design rather than the structure: it is recommended with GGBS and tri-blend mixes, mass pours that need cohesion, piling mixes, raft foundations and precast work where high early and ultimate strengths are wanted. Normal dosage is 0.8 to 2.5 litres per 100 kg of total cementitious material. Pouring in hot climates is a listed use, which matters on a UAE summer programme.
Documentation
Related documentation
Technical data sheet
Revision 10-2019 · 0.4 MB · PDF
Dynamon MR 2100 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
0.8 to 2.5 litre per 100 kg of total cementitious material
As published in the data sheet
8.00 to 25.0litres
- 0.8 to 2.5 litre per 100 kg of cement
- 1000 kg of cement
Order 1 pack of 200 litre drum
Taken from the Dynamon MR 2100 data sheet: DOSAGE: the normal recommended dosage rate of Dynamon MR2100 is 0.8 to 2.5 litre per 100kg of total cementitious material. No site allowance is added unless you turn one on. The dose is against the total cementitious material, so the cement plus any fly ash, silica fume or GGBS in the mix, not the cement on its own. The sheet says other dosages may be considered according to the site conditions and mix constituent properties. Supplied in 200 litre drums, 1000 litre IBCs and in bulk on request.
Application
Where it is used.
- 01High performance concrete needing exceptional workability and durability
- 02Precast elements requiring increased early and ultimate strengths
- 03Mixes containing fly ash, silica fume, GGBS and tri-blends
- 04Mass concrete pours needing improved cohesion
- 05Piling mixes and raft foundations
- 06Pouring in hot climates
Specification
Technical data.
- ASTM C494, EN 934-2
| Classification | ASTM C494, EN 934-2 |
|---|---|
| Pack size | 1000 l |
| Colours | amber |
| Consistency | liquid |
| Storage and shelf life | Dynamon MR2100 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. |
| Ph | 6.0 ± 1.5 |
| Density | 1.09±0.02 at +25°C |
Typical values as Mapei prints them in the data sheet for Dynamon MR 2100. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1000 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Dynamon MR2100 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Dynamon MR 2100, a bonding agent manufactured by Mapei, classified ASTM C494, EN 934-2. Allow 0.8 to 2.5 litre per 100 kg of cement, as published by the manufacturer. Supplied in 1000 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Dynamon MR 2100 |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Classification | ASTM C494, EN 934-2 |
| Dosage | 0.8 to 2.5 litre per 100 kg of cement |
| Pack size | 1000 l |
| Unit of measurement | m2 |
Frequently Asked Questions
Dynamon MR 2100 is classified ASTM C494, EN 934-2 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
1000 l
You can download the official Dynamon MR 2100 technical data sheet as a PDF directly from this page, revision 10-2019, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 2400
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Dynamon MR 2100 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Dynamon MR 2100 you need, or describe the job and we will work it out with you.

