Dynamon SR 2400 bonding agent pack
Mapei's own picture. The pack we stock: 200 l.

Mapei Bonding AgentNo. 07 / 53

Dynamon SR 2400 Technical Data Sheet (TDS)

Bonding Agent to ASTM C494, EN 934-2.

Dynamon SR2400 is a third generation chloride free hyperplasticising admixture based on polycarboxylate polymers, complying with ASTM C494 as Type G and with EN 934-2. Its distinguishing point within the range is that it is formulated for concrete made with aggregates containing clay, a common frustration where washed aggregate is not available and clay fines rob a conventional superplasticiser of its effect.

  • High strength and ready mix concrete
  • Concrete made with aggregates containing clay
  • Fly ash, silica fume and slag concrete
  • Mass concrete pours
  • Pile mixes and raft foundations
  • Pouring in hot climates
Data sheet0.3 MB

Build a list across products and send it once, or ask about Dynamon SR 2400 on WhatsApp now.

Class
ASTM C494, EN 934-2
Dosage
0.5 to 2 litre per 100 kg of cement
Pack we stock
200 l
Colour
light to dark brown

Mapei document 06998 · revision 2-2016

About Dynamon SR 2400

Dosage runs from 0.5 to 1.5 litres per 100 kg of cementitious content for normal concrete and 0.8 to 2.0 litres for high performance mixes, confirmed by trial. It is used in high strength and ready mix concrete, fly ash, silica fume and slag mixes, mass concrete, pile mixes and raft foundations. One compatibility limit decides whether it can be used at all: it must never be combined with naphthalene based superplasticisers.

Documentation

Related documentation

  • Technical data sheet

    Revision 2-2016 · 0.3 MB · PDF

    Dynamon SR 2400 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

kg

0.5 to 1.5 litre per 100 kg for normal concrete, 0.8 to 2.0 for high performance concrete

As published in the data sheet

5.00 to 20.0litres

  • 0.5 to 2 litre per 100 kg of cement
  • 1000 kg of cement

Order 1 pack of 200 litre drum

Send this quantity for a quote

Taken from the Dynamon SR 2400 data sheet: TYPICAL DOSAGE: for normal concrete 0.5 to 1.5 l/100 kg of total cementitious content, for high performance concrete 0.8 to 2.0 l/100 kg of total cementitious content. No site allowance is added unless you turn one on. The sheet prints two dosages and this range spans both of them: normal concrete takes 0.5 to 1.5 litre per 100 kg of total cementitious content and high performance concrete 0.8 to 2.0. The optimum has to be figured out by site trials using the selected cement, mineral additions and aggregates. Normally supplied in bulk, and on request in 200 litre drums and 1000 litre totes.

Application

Where it is used.

  1. 01High strength and ready mix concrete
  2. 02Concrete made with aggregates containing clay
  3. 03Fly ash, silica fume and slag concrete
  4. 04Mass concrete pours
  5. 05Pile mixes and raft foundations
  6. 06Pouring in hot climates

Specification

Technical data.

  • ASTM C494, EN 934-2
Dynamon SR 2400 technical specifications from the manufacturer TDS
ClassificationASTM C494, EN 934-2
Pack sizebulk, or 200 litre drums and 1000 litre totes on request
Colourslight to dark brown
Consistencyliquid
Storage and shelf lifeDynamon SR2400 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight.
Ph4.5±1.5
Density1.06±0.02 at +25°C

Typical values as Mapei prints them in the data sheet for Dynamon SR 2400. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

bulk, or 200 litre drums and 1000 litre totes on request. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Dynamon SR2400 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Dynamon SR 2400, a bonding agent manufactured by Mapei, classified ASTM C494, EN 934-2. Allow 0.5 to 2 litre per 100 kg of cement, as published by the manufacturer. Supplied in bulk, or 200 litre drums and 1000 litre totes on request. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Dynamon SR 2400
ProductDynamon SR 2400
ManufacturerMapei
TypeBonding Agent
ClassificationASTM C494, EN 934-2
Dosage0.5 to 2 litre per 100 kg of cement
Pack sizebulk, or 200 litre drums and 1000 litre totes on request
Unit of measurementm2

Frequently Asked Questions

Dynamon SR 2400 is classified ASTM C494, EN 934-2 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.

bulk, or 200 litre drums and 1000 litre totes on request

You can download the official Dynamon SR 2400 technical data sheet as a PDF directly from this page, revision 2-2016, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Dynamon SR 2400 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Dynamon SR 2400 you need, or describe the job and we will work it out with you.

Chat on WhatsApp