
Mapei Bonding AgentNo. 05 / 53
Dynamon MR 3000 Technical Data Sheet (TDS)
Bonding Agent to ASTM C494, EN 934-2.
Specified where a ready mix plant needs the water content down without losing fluidity, Dynamon MR3000 is a chloride free hyperplasticising admixture formulated from polymer modified polycarboxylate ether. It conforms to ASTM C494 as Type G and to EN 934-2.
- High performance ready mix concrete with a reduced water to cement ratio
- Precast and in situ concrete requiring a high level of finish
- Fly ash, silica fume, GGBS and tri-blend mixes
- Mass concrete pours with improved cohesion
- Piling mixes and raft foundations
- Pouring in hot climates
Build a list across products and send it once, or ask about Dynamon MR 3000 on WhatsApp now.
- Class
- ASTM C494, EN 934-2
- Dosage
- 0.5 to 2.5 litre per 100 kg of cement
- Pack we stock
- 200 l
- Colour
- brown
Mapei document 06949 · revision 3-2024
About Dynamon MR 3000
Normal dosage is 0.5 to 2.5 litres per 100 kg of total cementitious material, and an overdose does not adversely affect setting times, which is a useful margin for a plant running several mixes a day. It is recommended with GGBS and tri-blend mixes, for precast and in situ concrete needing an exceptionally high level of finish, and for mass pours, piling mixes and raft foundations. The admixture goes in after 50 to 70 per cent of the mixing water through a calibrated dispenser, separately from any other admixture in the same mix.
Documentation
Related documentation
Technical data sheet
Revision 3-2024 · 0.5 MB · PDF
Dynamon MR 3000 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
0.5 to 2.5 litre per 100 kg of total cementitious material
As published in the data sheet
5.00 to 25.0litres
- 0.5 to 2.5 litre per 100 kg of cement
- 1000 kg of cement
Order 1 pack of 200 litre drum
Taken from the Dynamon MR 3000 data sheet: DOSAGE: the normal recommended dosage rate of Dynamon MR3000 is 0.5 to 2.5 litre per 100kg of total cementitious material. No site allowance is added unless you turn one on. The dose is against the total cementitious material, so the cement plus any fly ash, silica fume or GGBS in the mix, not the cement on its own. The sheet says other dosages may be considered according to the site conditions and mix constituent properties. Supplied in 200 litre drums, 1000 litre IBCs and in bulk on request.
Application
Where it is used.
- 01High performance ready mix concrete with a reduced water to cement ratio
- 02Precast and in situ concrete requiring a high level of finish
- 03Fly ash, silica fume, GGBS and tri-blend mixes
- 04Mass concrete pours with improved cohesion
- 05Piling mixes and raft foundations
- 06Pouring in hot climates
Specification
Technical data.
- ASTM C494, EN 934-2
| Classification | ASTM C494, EN 934-2 |
|---|---|
| Pack size | Dynamon MR3000 is available in 200 L drums, 1000 L IBCs and in bulk on request. |
| Colours | brown |
| Consistency | liquid |
| Storage and shelf life | Dynamon MR3000 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. |
| Ph | 4.5±1.5 |
| Density | 1.07±0.02 at +25°C |
Typical values as Mapei prints them in the data sheet for Dynamon MR 3000. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
Dynamon MR3000 is available in 200 L drums, 1000 L IBCs and in bulk on request.. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Dynamon MR3000 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Dynamon MR 3000, a bonding agent manufactured by Mapei, classified ASTM C494, EN 934-2. Allow 0.5 to 2.5 litre per 100 kg of cement, as published by the manufacturer. Supplied in dynamon mr3000 is available in 200 l drums, 1000 l ibcs and in bulk on request.. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Dynamon MR 3000 |
|---|---|
| Manufacturer | Mapei |
| Type | Bonding Agent |
| Classification | ASTM C494, EN 934-2 |
| Dosage | 0.5 to 2.5 litre per 100 kg of cement |
| Pack size | Dynamon MR3000 is available in 200 L drums, 1000 L IBCs and in bulk on request. |
| Unit of measurement | m2 |
Frequently Asked Questions
Dynamon MR 3000 is classified ASTM C494, EN 934-2 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
Dynamon MR3000 is available in 200 L drums, 1000 L IBCs and in bulk on request.
You can download the official Dynamon MR 3000 technical data sheet as a PDF directly from this page, revision 3-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 2400
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.
Dynamon MR 3000 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Dynamon MR 3000 you need, or describe the job and we will work it out with you.

