Mapecoat Universal surface treatment pack
Mapei's own picture. The pack we stock: 10 kg.

Mapei Surface TreatmentNo. 19 / 79

Mapecoat Universal Technical Data Sheet (TDS)

Surface Treatment to CE EN 13813 SR B2 0 AR0 5 EFL.

One binder, three jobs, three consumption rates. Mapecoat Universal is a two component transparent epoxy binder mixed two parts A to one part B, used across the Mapefloor Compact System decorative range.

  • Binder for Mapefloor Compact System MF and HD
  • Decorative coloured quartz flooring
  • Adhesion promoter on cementitious substrates
  • Industrial resin flooring interiors
  • Decorative resin flooring interiors
Data sheet2.2 MB

Build a list across products and send it once, or ask about Mapecoat Universal on WhatsApp now.

Class
CE EN 13813 SR B2 0 AR0 5 EFL
Consumption
0.2 to 2.5 kg/m²
Pack we stock
10 kg
Colour
transparent straw yellow

Mapei document 06734

About Mapecoat Universal

At 0.2 to 0.4 kg/m² it works as an adhesion promoter; at 1.4 to 1.6 kg/m² it binds a Compact System MF floor of about 3 mm; at 2.0 to 2.5 kg/m² it binds a Compact System HD floor of about 7 mm. Bond strength to EN 13892-8 is quoted at 1.5 and 3.0 N/mm², and the system is CE marked to EN 13813 as SR B2.0 AR0.5 EFL. Epoxy is the right binder for a coloured quartz floor indoors, where hardness and chemical resistance matter more than movement. Work between +10°C and +30°C.

Documentation

Related documentation

  • Technical data sheet

    2.2 MB · PDF

    Mapecoat Universal as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

70.0 to 80.0kg

  • Binder for Mapefloor Compact System MF: 1.4 to 1.6 kg/m2
  • over 50 m2

Order 5 to 6 packs of 15 kg unit, component A 10 kg plus component B 5 kg

Send this quantity for a quote

Taken from the Mapecoat Universal data sheet: CONSUMPTION: 0,2-0,4 kg/m2 as adhesion promoter; 1,4-1,6 kg/m2 as binder for Mapefloor Compact System MF at approx. 3 mm; 2,0-2,5 kg/m2 as binder for Mapefloor Compact System HD at approx. 7 mm. No site allowance is added unless you turn one on. Three different uses with rates a factor of ten apart. A single flat figure is wrong for all three, so the use has to be chosen before the quantity means anything.

Application

Where it is used.

  1. 01Binder for Mapefloor Compact System MF and HD
  2. 02Decorative coloured quartz flooring
  3. 03Adhesion promoter on cementitious substrates
  4. 04Industrial resin flooring interiors
  5. 05Decorative resin flooring interiors

Specification

Technical data.

  • CE EN 13813 SR B2 0 AR0 5 EFL
Mapecoat Universal technical specifications from the manufacturer TDS
ClassificationCE EN 13813 SR B2 0 AR0 5 EFL
Coverage· 0,2-0,4 kg/m² if used as adhesion promoter. · 1,4-1,6 kg/m² if used as binder for Mapefloor Compact System MF for thickness of approx. 3 mm. · 2,0-2,5 kg/m² if used as binder for Mapefloor Compact System HD for thickness of approx. 7 mm.
Pack size10 kg, 5 kg
Colourstransparent straw yellow
Mixing ratiocomponent A : component B = 2 : 1
Bond strengthEN 13892-8; 2004 ≥ 1.5 N/mm² ≥ 3.0 N/mm²
Application temperaturemin. +10°C - max. +30°C
Consistencyliquid liquid
Storage and shelf lifeThe product may be stored for up to 24 months if kept in its original packaging in a dry place at a temperature of +5°C to +30°C.
Density1.12 1.01 g/cm³

Typical values as Mapei prints them in the data sheet for Mapecoat Universal. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 2 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

The product may be stored for up to 24 months if kept in its original packaging in a dry place at a temperature of +5°C to +30°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapecoat Universal, a surface treatment manufactured by Mapei, classified CE EN 13813 SR B2 0 AR0 5 EFL. Allow 0.2 to 2.5 kg/m2, as published by the manufacturer. Mix at component A : component B = 2 : 1. Supplied in 10 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapecoat Universal
ProductMapecoat Universal
ManufacturerMapei
TypeSurface Treatment
ClassificationCE EN 13813 SR B2 0 AR0 5 EFL
Consumption0.2 to 2.5 kg/m2
Pack size10 kg, 5 kg
Mixing ratiocomponent A : component B = 2 : 1
Unit of measurementm2

Frequently Asked Questions

Mapecoat Universal is classified CE EN 13813 SR B2 0 AR0 5 EFL according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.

As per the TDS: · 0,2-0,4 kg/m² if used as adhesion promoter. · 1,4-1,6 kg/m² if used as binder for Mapefloor Compact System MF for thickness of approx. 3 mm. · 2,0-2,5 kg/m² if used as binder for Mapefloor Compact System HD for thickness of approx. 7 mm.

10 kg, 5 kg

You can download the official Mapecoat Universal technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapecoat Universal in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat Universal you need, or describe the job and we will work it out with you.

Chat on WhatsApp