Mapecrete Stain Protection surface treatment pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Surface TreatmentNo. 20 / 79

Mapecrete Stain Protection Technical Data Sheet (TDS)

Mapei surface treatment.

Mapecrete Stain Protection is a water borne micro emulsion of modified organic polymers that soaks into concrete instead of coating it, so a polished slab keeps its appearance and there is no film to peel or to recoat. That is what separates it from a Mapefloor or Mapecoat resin finish: no build, no change of sheen, no solvent on site.

  • Protecting rough or polished concrete surfaces
  • Protecting concrete industrial floors in shopping centres, discount food stores and goods warehouses
  • Protecting concrete industrial floors in supermarkets
  • Protecting polished industrial floors in terrazzo made with natural or artificial aggregates
  • Treating cementitious screeds against oily substances and watery solutions
  • Treating natural stone surfaces against staining
Data sheet1.2 MB

Build a list across products and send it once, or ask about Mapecrete Stain Protection on WhatsApp now.

Consumption
0.1 to 0.3 kg/m²
Pack we stock
25 kg
Colour
transparent

Mapei document 00572 · revision 2-2012

About Mapecrete Stain Protection

The sheet measures what the treatment buys. Absorption by immersion in oil drops from 1.20 to below 0.35 percent, and capillary absorption from 0.90 to below 0.25 kg/m2 h0,5. The work it is written for is food retail, supermarket and warehouse floors, where oil, grease, coffee and soft drinks are the risk. What rules it out is the substrate: not on dusty, crumbling or oil soaked concrete, not on concrete that is not yet cured, and the surface must be evenly dry. Consumption is 0.1 to 0.3 kg/m2 by porosity.

Documentation

Related documentation

  • Technical data sheet

    Revision 2-2012 · 1.2 MB · PDF

    Mapecrete Stain Protection as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Revision 5-2026 · 0.2 MB · PDF

    For the method statement and the site file.

    Download
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

5.00 to 15.0kg

  • By the level of porosity of the concrete: 0.1 to 0.3 kg/m2
  • over 50 m2

Order 1 pack of 25 kg plastic drum

Send this quantity for a quote

Taken from the Mapecrete Stain Protection data sheet: CONSUMPTION: 0.1-0.3 kg/m2 according to the level of porosity of the concrete. PACKAGING: 25 kg plastic drums. No site allowance is added unless you turn one on. The sheet prints a single range and pins it to porosity alone, with no separate row per surface, so the whole span is shown rather than a chosen figure. Against the printed 25 kg drum that is 250 m2 at the low end and about 83 m2 at the high end. It is applied in one pass by airless spray or brush; the sheet prints no second coat.

Application

Where it is used.

  1. 01Protecting rough or polished concrete surfaces
  2. 02Protecting concrete industrial floors in shopping centres, discount food stores and goods warehouses
  3. 03Protecting concrete industrial floors in supermarkets
  4. 04Protecting polished industrial floors in terrazzo made with natural or artificial aggregates
  5. 05Treating cementitious screeds against oily substances and watery solutions
  6. 06Treating natural stone surfaces against staining

Specification

Technical data.

Mapecrete Stain Protection technical specifications from the manufacturer TDS
Coverage0.1 to 0.3 kg/m2 according to the level of porosity of the concrete
Pack size25 kg plastic drums
Colourstransparent
Application temperaturefrom +10°C to +30°C
Consistencyliquid
Storage and shelf life12 months in its original packaging in a dry area between +10°C and +30°C
Density1.0 g/cm3
Ph8
Chloride ion contentless than or equal to 0.05% (EN 1015-17)
Drying timegenerally 2 to 4 hours according to the temperature and the level of humidity
Full efficiencyapproximately 24 hours after application
Oil absorptionuntreated substrate 1.20%, treated below 0.35% (EN 13580 modified with oil)
Capillary absorptionuntreated substrate 0.90, treated below 0.25 kg/m2 h0,5 (EN 13057)

Typical values as Mapei prints them in the data sheet for Mapecrete Stain Protection. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg plastic drums. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in its original packaging in a dry area between +10°C and +30°C in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapecrete Stain Protection, a surface treatment manufactured by Mapei. Allow 0.1 to 0.3 kg/m2, as published by the manufacturer. Supplied in 25 kg plastic drums. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapecrete Stain Protection
ProductMapecrete Stain Protection
ManufacturerMapei
TypeSurface Treatment
Consumption0.1 to 0.3 kg/m2
Pack size25 kg plastic drums
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 0.1 to 0.3 kg/m2 according to the level of porosity of the concrete

25 kg plastic drums

You can download the official Mapecrete Stain Protection technical data sheet as a PDF directly from this page, revision 2-2012, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapecrete Stain Protection in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecrete Stain Protection you need, or describe the job and we will work it out with you.

Chat on WhatsApp