
Mapei Flooring AdhesiveNo. 21 / 79
Mapecryl Eco Technical Data Sheet (TDS)
Mapei flooring adhesive.
Mapecryl Eco is the ready to use acrylic dispersion adhesive for PVC, linoleum and textile coverings on absorbent interior floors and walls, heated screeds included, and it is rated for chair castors to EN 12529. Consumption follows the notch: 200 g/m2 by roller, 250 to 350 through a TKB A1 or A2, 350 to 400 through a B1, 400 to 500 through a B2, or 300 to 350 and 400 to 450 through Mapei trowels 1 and 2.
- Homogeneous and heterogeneous PVC sheet floor coverings
- CV and multilayer PVC and semi flexible vinyl tiles
- Textile and flocked floor coverings with common backings
- PVC wall coverings and needle punch woven flooring
- Linoleum with natural jute backing up to 2.5 mm thick
- Floors over underfloor heating systems
Build a list across products and send it once, or ask about Mapecryl Eco on WhatsApp now.
- Consumption
- 0.2 to 0.5 kg/m²
- Pack we stock
- 25 kg
- Colour
- pale beige
Mapei document 00228 · revision 2-2024
About Mapecryl Eco
The covering and the exposure decide it. Mapei sends solar gain, forklift traffic and frequently rinsed floors to the reactive Adesilex G19 or G20, and vinyl with poor dimensional stability to Ultrabond Eco VS90 Plus or Eco 4 LVT. A non absorbent substrate needs 2 mm of smoothing compound first. Laid wet: 0 to 10 minutes waiting, 20 to 30 minutes open time, light foot traffic at 3 to 5 hours.
Documentation
Related documentation
Technical data sheet
Revision 2-2024 · 2.8 MB · PDF
Mapecryl Eco as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
17.5 to 20.0kg
- TKB B1: 0.35 to 0.4 kg/m2
- over 50 m2
Order 2 packs of 16 kg bucket
Taken from the Mapecryl Eco data sheet: CONSUMPTION: MAPEI trowel no. 1 approx. 300 to 350 g/m2, MAPEI trowel no. 2 approx. 400 to 450 g/m2, roller approx. 200 g/m2, TKB A1/A2 approx. 250 to 350 g/m2, TKB B1 approx. 350 to 400 g/m2, TKB B2 approx. 400 to 500 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Ready to use, so the rate is of the product as supplied. The sheet lists each trowel and notch class without pairing one to a covering, and the only method it singles out is the roller, for thin wall coverings; TKB B1 is the default as the notch class for standard sheet goods, so change the row if the covering calls for another notch. Also supplied in 25 kg and 5 kg buckets.
Application
Where it is used.
- 01Homogeneous and heterogeneous PVC sheet floor coverings
- 02CV and multilayer PVC and semi flexible vinyl tiles
- 03Textile and flocked floor coverings with common backings
- 04PVC wall coverings and needle punch woven flooring
- 05Linoleum with natural jute backing up to 2.5 mm thick
- 06Floors over underfloor heating systems
Specification
Technical data.
- EMICODE EC1 Plus - very low emission
| Coverage | MAPEI trowel no. 1 approx. 300-350 g/m², trowel no. 2 approx. 400-450 g/m², roller approx. 200 g/m², TKB A1/A2 approx. 250-350 g/m², TKB B1 approx. 350-400 g/m², TKB B2 approx. 400-500 g/m² |
|---|---|
| Pack size | 25 kg, 16 kg and 5 kg buckets |
| Open time | 20-30 minutes |
| Set to light foot traffic | set to light foot traffic 3-5 hours, ready for use 24-48 hours |
| Colours | pale beige |
| Application temperature | +15°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | at least 12 months in the original sealed packaging, avoid prolonged exposure to frost |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.40 g/cm³ |
| Ph | 8.0 |
| Cleaning agent | water while wet, alcohol or a suitable solvent once dry |
Typical values as Mapei prints them in the data sheet for Mapecryl Eco. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg, 16 kg and 5 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
at least 12 months in the original sealed packaging, avoid prolonged exposure to frost in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
Cleaning
water while wet, alcohol or a suitable solvent once dry. Clean tools before the material hardens; once cured it comes off by mechanical means only.
For quantity surveyors
BOQ clause.
Supply and apply Mapecryl Eco, a flooring adhesive manufactured by Mapei. Allow 0.2 to 0.5 kg/m2, as published by the manufacturer. Supplied in 25 kg, 16 kg and 5 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecryl Eco |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.2 to 0.5 kg/m2 |
| Pack size | 25 kg, 16 kg and 5 kg buckets |
| Set time | set to light foot traffic 3-5 hours, ready for use 24-48 hours |
| Open time | 20-30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: MAPEI trowel no. 1 approx. 300-350 g/m², trowel no. 2 approx. 400-450 g/m², roller approx. 200 g/m², TKB A1/A2 approx. 250-350 g/m², TKB B1 approx. 350-400 g/m², TKB B2 approx. 400-500 g/m²
25 kg, 16 kg and 5 kg buckets
You can download the official Mapecryl Eco technical data sheet as a PDF directly from this page, revision 2-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecryl Eco in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecryl Eco you need, or describe the job and we will work it out with you.

