Mapefloor Binder 930 microcement pack
Mapei's own picture. The pack we stock: 5 kg.

Mapei MicrocementNo. 22 / 79

Mapefloor Binder 930 Technical Data Sheet (TDS)

Mapei microcement.

Resin bound paving is a mortar mixed on site from aggregate and binder, and the binder decides how it behaves. Mapefloor Binder 930 is a one component aliphatic polyurethane binder for decorative floors, colourless and transparent so the natural aggregate shows rather than a pigment.

  • Resin bound decorative mortar with natural aggregates
  • Permeable paving and urban landscaping
  • Decorative resin flooring
  • Exterior work needing non yellowing binders
  • Pedestrian paths and courtyards
Data sheet0.8 MB

Build a list across products and send it once, or ask about Mapefloor Binder 930 on WhatsApp now.

Consumption
0.08 to 0.1 kg/m² per mm
Pack we stock
5 kg
Colour
transparent colourless

Mapei document 02101

About Mapefloor Binder 930

Consumption is roughly 0.8 to 1.0 kg/m² per centimetre of mortar thickness, depending on the type and absorbency of the aggregate, and it is batched by weight against 2 to 4 mm stone. Aliphatic chemistry keeps it from yellowing outdoors. Careful traffic is possible after eight hours. Supplied in 5 kg packs with a 12 month shelf life above +5°C. In the UAE it suits permeable landscape paving, where surface water drains through the mortar instead of running to a gully.

Documentation

Related documentation

  • Technical data sheet

    0.8 MB · PDF

    Mapefloor Binder 930 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 5 to 40 mm.

As published in the data sheet

40.0 to 50.0kg

  • 0.08 to 0.1 kg/m2 per mm
  • 10 mm thick
  • over 50 m2

Order 8 to 10 packs of 5 kg bucket

Send this quantity for a quote

Taken from the Mapefloor Binder 930 data sheet: CONSUMPTION: Approximately 0.8-1.0 kg/m2 of Mapefloor Binder 930 per cm of thickness of mortar, depending on the type and absorbency of the aggregates. No site allowance is added unless you turn one on. The rate is per centimetre of thickness of the mortar the binder goes into, not of the binder itself, and the binder is mixed 1:20 by weight with 2 to 4 mm pebbles. The printed 0.8 to 1.0 kg/m2 per cm is shown here as 0.08 to 0.1 per mm so that it can be set against a thickness in millimetres. The default of 10 mm is one centimetre, so the answer at the default reads straight off the printed figure; the 5 and 40 mm bounds are a working range for a resin screed and not a sheet figure. The sheet warns against exceeding the recommended dosage.

Application

Where it is used.

  1. 01Resin bound decorative mortar with natural aggregates
  2. 02Permeable paving and urban landscaping
  3. 03Decorative resin flooring
  4. 04Exterior work needing non yellowing binders
  5. 05Pedestrian paths and courtyards

Where it is not the right product

  • As a waterproofing layer, because it is a finish and needs a membrane beneath it in wet areas
  • Over a substrate that is unsound, moving or uneven, which will telegraph through the finish

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

Mapefloor Binder 930 technical specifications from the manufacturer TDS
CoverageApproximately 0.8-1.0 kg/m² of Mapefloor Binder 930 per cm of thickness of mortar, depending on the type and absorbency of the aggregates.
Pack size5 kg
Set to light foot traffic(with care): 8 hours
Colourstransparent colourless
Mixing ratioby weight binder:aggregates (2-4 mm
Consistencyliquid
Storage and shelf lifeThe product can be stored for 12 months in its original sealed packaging, in a dry place at a temperature no lower than +5°C. Protect from frost.
Density1.15 g/cm³

Typical values as Mapei prints them in the data sheet for Mapefloor Binder 930. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

by weight binder:aggregates (2-4 mm. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

The product can be stored for 12 months in its original sealed packaging, in a dry place at a temperature no lower than +5°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefloor Binder 930, a microcement manufactured by Mapei. Allow 0.08 to 0.1 kg/m2 per mm, as published by the manufacturer. Mix at by weight binder:aggregates (2-4 mm. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefloor Binder 930
ProductMapefloor Binder 930
ManufacturerMapei
TypeMicrocement
Consumption0.08 to 0.1 kg/m2 per mm
Pack size5 kg
Mixing ratioby weight binder:aggregates (2-4 mm
Set time(with care): 8 hours
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Approximately 0.8-1.0 kg/m² of Mapefloor Binder 930 per cm of thickness of mortar, depending on the type and absorbency of the aggregates.

5 kg

You can download the official Mapefloor Binder 930 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefloor Binder 930 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor Binder 930 you need, or describe the job and we will work it out with you.

Chat on WhatsApp