
Mapei Flooring SystemNo. 25 / 79
Mapefloor CPU+/MF Technical Data Sheet (TDS)
Flooring System to CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28.
Polyurethane cement exists because epoxy cannot survive a washdown floor. Hot water, steam cleaning and organic acids put a food plant floor through thermal shock and chemical attack at the same time, and a rigid epoxy debonds.
- Flooring systems for the food industry
- Flooring systems for the chemical and pharmaceutical industry
- Self smoothing polyurethane cement floors from 3 to 6 mm
- Washdown and steam cleaned areas
- Industrial resin flooring construction
Build a list across products and send it once, or ask about Mapefloor CPU+/MF on WhatsApp now.
- Class
- CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28
- Consumption
- 1.7 to 10 kg/m²
- Pack we stock
- 20 kg
- Colour
- Milky white Dark brown White
About Mapefloor CPU+/MF
Mapefloor CPU+/MF is a self smoothing polyurethane cement mortar laid from 3 to 6 mm, classified CE CT C50 F15 A6 BFL S1 with bond strength of at least 2 N/mm², and marked HACCP and Indoor Air Comfort Gold. Consumption runs about 5.5 kg/m² at 3 mm, 7 kg/m² at 4 mm and 10 kg/m² at 6 mm, with roughly 1.7 kg/m² for a 1 mm scratch coat beneath. Pot life is 15 minutes at +23°C, and that is the real constraint on a UAE dairy or bakery floor: batch small, place fast.
Documentation
Related documentation
Technical data sheet
0.8 MB · PDF
Mapefloor CPU+/MF as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
275kg
- Self smoothing layer, 3 mm: 5.5 kg/m2
- over 50 m2
Taken from the Mapefloor CPU+/MF data sheet: CONSUMPTION: as scratch coat at 1 mm thickness approx. 1.7 kg/m2; as self-smoothing layer, 3 mm approx. 5.5 kg/m2, 4 mm approx. 7 kg/m2, 6 mm approx. 10 kg/m2. No site allowance is added unless you turn one on. Only the sheet's own four printed rows are offered and nothing in between, because the table is not linear and disagrees with the sheet's own 1.7 kg/m2 per mm: 5.5 over 3 mm is 1.83 per mm and 10 over 6 mm is 1.67, an eight percent spread, so interpolating would be our arithmetic rather than Mapei's. Consumption is influenced by the roughness and absorption of the substrate and by site conditions. No pack is offered because the product is mixed from several packs: component A 2 kg, component B 2.16 kg, component C 20 kg bag and Mapecolor CPU+ 0.23 kg, and one batch is two packs of A, two of B, one sack of C and two of Mapecolor.
Application
Where it is used.
- 01Flooring systems for the food industry
- 02Flooring systems for the chemical and pharmaceutical industry
- 03Self smoothing polyurethane cement floors from 3 to 6 mm
- 04Washdown and steam cleaned areas
- 05Industrial resin flooring construction
Specification
Technical data.
- CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28
- EN 13813
| Classification | CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28 |
|---|---|
| Coverage | As scratch coat 1 mm thickness: Mapefloor CPU+/MF: approx. 1.7 kg/m As self-smoothing layer: Mapefloor CPU+/MF 3 mm: approx. 5.5 kg/m Mapefloor CPU+/MF 4 mm: approx. 7 kg/m Mapefloor CPU+/MF 6 mm: approx. 10 kg/m The consumption is influenced by the roughness and absorption of the substrate as well |
| Pack size | 20 kg, 28.32 kg |
| Pot life | at +23°C: 15 min |
| Colours | Milky white Dark brown White |
| Mixing ratio | by weight: 2xA / 2xB / 1xC / 2xMapecolor CPU+: 2x2.0 / 2x2.16 / 1x20 / 2x0.23 |
| Bond strength | (EN 13892-8): ≥ 2 N/mm |
| Consistency | of the mix: Fluid |
| Storage and shelf life | 12 months in the original sealed packaging and kept in a dry and sheltered place at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/MF part C is sensitive to humidity. |
| Density | 1-1.05 g/cm³ 1.2 g/cm³ - 1.30-1.60 g/cm³ |
| Compressive strength | EN 13892-2 From C5 to C80 C50 |
| Flexural strength | EN 13892-2 From F1 to F50 F15 |
Typical values as Mapei prints them in the data sheet for Mapefloor CPU+/MF. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg, 28.32 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: 2xA / 2xB / 1xC / 2xMapecolor CPU+: 2x2.0 / 2x2.16 / 1x20 / 2x0.23. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
at +23°C: 15 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in the original sealed packaging and kept in a dry and sheltered place at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/MF part C is sensitive to humidity. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor CPU+/MF, a flooring system manufactured by Mapei, classified CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28. Allow 1.7 to 10 kg/m2, as published by the manufacturer. Mix at by weight: 2xA / 2xB / 1xC / 2xMapecolor CPU+: 2x2.0 / 2x2.16 / 1x20 / 2x0.23. Supplied in 20 kg, 28.32 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor CPU+/MF |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Classification | CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28 |
| Consumption | 1.7 to 10 kg/m2 |
| Pack size | 20 kg, 28.32 kg |
| Mixing ratio | by weight: 2xA / 2xB / 1xC / 2xMapecolor CPU+: 2x2.0 / 2x2.16 / 1x20 / 2x0.23 |
| Pot life | at +23°C: 15 min |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapefloor CPU+/MF is classified CE CT C50 F15 A6 BFL S1, HACCP LOGO, INDOOR AIR COMFORT_GOLD_BLUE, LOW ODOUR ICON ISO 16000-28 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: As scratch coat 1 mm thickness: Mapefloor CPU+/MF: approx. 1.7 kg/m As self-smoothing layer: Mapefloor CPU+/MF 3 mm: approx. 5.5 kg/m Mapefloor CPU+/MF 4 mm: approx. 7 kg/m Mapefloor CPU+/MF 6 mm: approx. 10 kg/m The consumption is influenced by the roughness and absorption of the substrate as well
20 kg, 28.32 kg
You can download the official Mapefloor CPU+/MF technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor CPU+/MF in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor CPU+/MF you need, or describe the job and we will work it out with you.

