
Mapei PrimerNo. 26 / 79
Mapefloor CPU+/Primer Technical Data Sheet (TDS)
Primer to HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28.
A polyurethane cement floor is primed with polyurethane cement, not with epoxy. Mapefloor CPU+/Primer is the three part primer for the Mapefloor CPU+ systems, applied at roughly 0.3 to 0.4 kg/m², with consumption rising on a rough or absorbent slab.
- Priming under Mapefloor CPU+ systems
- Flooring systems for the food industry
- Flooring systems for the chemical and pharmaceutical industry
- Suction control on absorbent concrete slabs
- Polyurethane cement flooring build ups
Build a list across products and send it once, or ask about Mapefloor CPU+/Primer on WhatsApp now.
- Class
- HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28
- Consumption
- 0.3 to 0.4 kg/m²
- Pack we stock
- 2.5 kg
- Colour
- Milky white Dark brown White
About Mapefloor CPU+/Primer
Its job is to wet the concrete, control suction and give the mortar above it a uniform surface to bond to, which is what keeps a food plant floor in service rather than lifting at the edges. It shares the HACCP, Indoor Air Comfort Gold and low odour ISO 16000-28 marks of the system it belongs to. Pot life is 15 minutes at +23°C, so it is mixed in small lots and brushed out at once. Part C is sensitive to humidity, which matters in a coastal UAE store.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapefloor CPU+/Primer as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
15.0 to 20.0kg
- As printed: 0.3 to 0.4 kg/m2
- 1 coat
- over 50 m2
Taken from the Mapefloor CPU+/Primer data sheet: CONSUMPTION: Mapefloor CPU+/Primer approx. 0.3 to 0.4 kg/m2. The consumption is influenced by the roughness and absorption of the substrate. No site allowance is added unless you turn one on. Mapefloor CPU+/Primer is batched from three components, A at 2 kg, B at 2.16 kg and the primer part C at 2.5 kg, so the order is made up in kits rather than in single drums. The sheet prints a single range of 0.3 to 0.4 and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published.
Application
Where it is used.
- 01Priming under Mapefloor CPU+ systems
- 02Flooring systems for the food industry
- 03Flooring systems for the chemical and pharmaceutical industry
- 04Suction control on absorbent concrete slabs
- 05Polyurethane cement flooring build ups
Specification
Technical data.
- HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28
| Classification | HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28 |
|---|---|
| Coverage | Mapefloor CPU+/Primer: approx. 0.3 - 0.4 kg/m The consumption is influenced by the roughness and absorption of the substrate as well as by the environmental and working conditions of the job site. |
| Pack size | 2.5 kg |
| Pot life | at +23°C: 15 min |
| Colours | Milky white Dark brown White |
| Mixing ratio | by weight: A / B / C: 2 / 2.16 / 2.5 |
| Consistency | of the mix: Fluid |
| Storage and shelf life | 12 months in the original sealed packaging and kept in a dry and sheltered place at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/Primer part C is sensitive to humidity. |
| Density | 1 - 1.05 g/cm³ 1.2 g/cm³ - |
Typical values as Mapei prints them in the data sheet for Mapefloor CPU+/Primer. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
2.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: A / B / C: 2 / 2.16 / 2.5. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
at +23°C: 15 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in the original sealed packaging and kept in a dry and sheltered place at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/Primer part C is sensitive to humidity. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor CPU+/Primer, a primer manufactured by Mapei, classified HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28. Allow 0.3 to 0.4 kg/m2, as published by the manufacturer. Mix at by weight: A / B / C: 2 / 2.16 / 2.5. Supplied in 2.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor CPU+/Primer |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Classification | HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28 |
| Consumption | 0.3 to 0.4 kg/m2 |
| Pack size | 2.5 kg |
| Mixing ratio | by weight: A / B / C: 2 / 2.16 / 2.5 |
| Pot life | at +23°C: 15 min |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapefloor CPU+/Primer is classified HACCP LOGO, INDOOR AIR COMFORT GOLD BLUE, LOW ODOUR ICON ISO 16000-28 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Mapefloor CPU+/Primer: approx. 0.3 - 0.4 kg/m The consumption is influenced by the roughness and absorption of the substrate as well as by the environmental and working conditions of the job site.
2.5 kg
You can download the official Mapefloor CPU+/Primer technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor CPU+/Primer in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor CPU+/Primer you need, or describe the job and we will work it out with you.

