
Mapei Flooring SystemNo. 49 / 79
Mapelux Opaca Technical Data Sheet (TDS)
Mapei flooring system.
Gloss is a maintenance decision as much as a design one, and this is the matt option. Mapelux Opaca is a cross linked high strength metallic wax with a matt finish, applied at 50 g/m² as part of a routine cleaning and protection regime.
- Routine cleaning and floor maintenance
- Protecting resin and cementitious floors
- Sacrificial matt wax layers
- Large open floors under strong lighting
- Periodic strip and reapply regimes
Build a list across products and send it once, or ask about Mapelux Opaca on WhatsApp now.
- Consumption
- 0.1 kg/m² over 2 coats
- Pack we stock
- 10 kg
- Colour
- white
Mapei document 02040
About Mapelux Opaca
It does the same sacrificial job as the shiny grade: it absorbs the scuffs and the cleaning chemicals, then gets stripped and reapplied rather than mended. A matt film also hides scratching and uneven light far better than gloss, which is why it suits a large open floor under strong lighting. Application runs from +10°C to +30°C, in 10 kg units with a 12 month shelf life. In the UAE, matt also means less glare from sunlight coming through a shopfront.
Documentation
Related documentation
Technical data sheet
1.3 MB · PDF
Mapelux Opaca as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
5.00kg
- One coat by wax spreader: 0.05 kg/m2
- 2 coats
- over 50 m2
Order 1 pack of 10 kg can
Taken from the Mapelux Opaca data sheet: CONSUMPTION: 50 g/m2. No site allowance is added unless you turn one on. The sheet prints a single figure, 50 g/m2, which is 0.05 kg/m2, and it is per coat: Mapelux Opaca is spread as a first coat and then, once that has dried, a second coat at right angles to it, so two coats is the default here.
Application
Where it is used.
- 01Routine cleaning and floor maintenance
- 02Protecting resin and cementitious floors
- 03Sacrificial matt wax layers
- 04Large open floors under strong lighting
- 05Periodic strip and reapply regimes
Specification
Technical data.
- EN 13813
| Coverage | 50 g/m². |
|---|---|
| Pack size | 10 kg |
| Colours | white |
| Application temperature | from +10°C to +30°C |
| Consistency | emulsion |
| Storage and shelf life | Mapelux Opaca can be stored for 12 months in its original packaging at a temperature between +10°C and +30°C. Protect from frost. |
| Density | 1.036 g/cm³ |
| Ph | 8.4 ± 0.2 |
Typical values as Mapei prints them in the data sheet for Mapelux Opaca. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapelux Opaca can be stored for 12 months in its original packaging at a temperature between +10°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapelux Opaca, a flooring system manufactured by Mapei. Allow 0.1 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapelux Opaca |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.1 kg/m2 over 2 coats |
| Pack size | 10 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 50 g/m².
10 kg
You can download the official Mapelux Opaca technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapelux Opaca in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapelux Opaca you need, or describe the job and we will work it out with you.

