
Mapei Flooring SystemNo. 48 / 79
Mapelux Lucida Technical Data Sheet (TDS)
Mapei flooring system.
The last layer of a floor build up is the one that gets renewed. Mapelux Lucida is a cross linked high strength metallic wax with a shiny finish, applied at 50 g/m² as part of routine cleaning and maintenance rather than as part of the floor itself.
- Routine cleaning and floor maintenance
- Protecting resin and cementitious floors
- Sacrificial gloss wax layers
- Retail and commercial floor care
- Periodic strip and reapply regimes
Build a list across products and send it once, or ask about Mapelux Lucida on WhatsApp now.
- Consumption
- 0.1 kg/m² over 2 coats
- Pack we stock
- 10 kg
- Colour
- white
Mapei document 02041
About Mapelux Lucida
A sacrificial wax takes the scuffing and the cleaning chemicals so the resin or cementitious surface beneath it does not, and it is stripped and reapplied on a cycle instead of being repaired. Cross linking is what gives it enough strength to be worth applying on a commercial floor at all. It is applied between +10°C and +30°C and supplied in 10 kg units with a 12 month shelf life. For a UAE retail unit, set the renewal cycle against footfall, not the calendar.
Documentation
Related documentation
Technical data sheet
0.9 MB · PDF
Mapelux Lucida as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
5.00kg
- One coat by wax spreader: 0.05 kg/m2
- 2 coats
- over 50 m2
Order 1 pack of 10 kg can
Taken from the Mapelux Lucida data sheet: CONSUMPTION: 50 g/m2. No site allowance is added unless you turn one on. The sheet prints a single figure, 50 g/m2, which is 0.05 kg/m2, and it is per coat: Mapelux Lucida is spread as a first coat and then, once that has dried, a second coat at right angles to it, so two coats is the default here.
Application
Where it is used.
- 01Routine cleaning and floor maintenance
- 02Protecting resin and cementitious floors
- 03Sacrificial gloss wax layers
- 04Retail and commercial floor care
- 05Periodic strip and reapply regimes
Specification
Technical data.
- EN 13813
| Coverage | 50 g/m². |
|---|---|
| Pack size | 10 kg |
| Colours | white |
| Application temperature | from +10°C to +30°C |
| Consistency | emulsion |
| Storage and shelf life | Mapelux Lucida can be stored for 12 months in its original packaging at a temperature between +10°C and +30°C. Protect from frost. |
| Density | 1.036 g/cm³ |
| Ph | 8.4 ± 0.2 |
Typical values as Mapei prints them in the data sheet for Mapelux Lucida. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapelux Lucida can be stored for 12 months in its original packaging at a temperature between +10°C and +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapelux Lucida, a flooring system manufactured by Mapei. Allow 0.1 kg/m2 over 2 coats, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapelux Lucida |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.1 kg/m2 over 2 coats |
| Pack size | 10 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 50 g/m².
10 kg
You can download the official Mapelux Lucida technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapelux Lucida in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapelux Lucida you need, or describe the job and we will work it out with you.

