
Mapei PrimerNo. 52 / 79
Primer MF (a+b) Technical Data Sheet (TDS)
Mapei primer.
Primer MF is the two component solvent free epoxy primer Mapei publishes as a residual moisture barrier, predosed three parts A to one part B and applied at 0.2 to 0.4 kg/m2 per coat. That is what separates it from Primer G, which evens out absorption but does nothing about damp.
- Moisture barrier under wooden and resilient floors sensitive to damp
- Treating concrete slabs and cementitious screeds with high residual moisture
- Consolidation treatment of weak cementitious substrates
- Dustproof coating over superficially inconsistent cement and anhydrite screeds
- Binder mixed with Quartz 1.2 for small smoothing and repair mortars
- Consolidating cementitious and anhydrite heating screeds once dry
Build a list across products and send it once, or ask about Primer MF (a+b) on WhatsApp now.
- Consumption
- 0.4 to 0.8 kg/m² over 2 coats
- Pack we stock
- 4 kg
- Colour
- transparent (component A and component B transparent yellow)
Mapei document 00544 · revision 10-2024
About Primer MF (a+b)
Primer MF goes over concrete slabs and cementitious screeds reading up to 6% CM or 100% RH, and up to 3% CM or 50% RH on heated screeds, before moisture sensitive wooden and resilient floors are laid. The hygrometer reading and the finish decide it. A barrier needs a continuous film, so at least two coats about three hours apart, the first by trowel and the second by roller; one coat is enough where the job is only to consolidate a weak or dusty screed. Broadcast fresh Quartz 1.2 to anchor skim coats and adhesives.
Documentation
Related documentation
Technical data sheet
Revision 10-2024 · 1.7 MB · PDF
Primer MF (a+b) as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
20.0 to 40.0kg
- Per coat, as printed: 0.2 to 0.4 kg/m2
- 2 coats
- over 50 m2
Order 5 to 10 packs of 4 kg kit, 3 kg part A plus 1 kg part B
Taken from the Primer MF (a+b) data sheet: CONSUMPTION: 0.2-0.4 kg/m2 per coat, depending on the evenness and absorption of the substrate (200 g/m2 per application layer). The sheet prints one range and no substrate table. No site allowance is added unless you turn one on. Two coats is the default because that is what the sheet asks for: apply in at least 2 coats, waiting about 3 hours between them and never more than 12 to 24 hours, the first by trowel and the second by roller, which is how the continuous film a moisture barrier needs is actually achieved. One coat is the sheet's own allowance for use as a consolidating agent only, so it is the lighter case and not the default. The printed rate is of the mixed product as supplied. The first coat may be thinned with Primer KL, at most one 1 litre bottle equal to 0.8 kg per 4 kg kit, which stretches penetration rather than coverage and is given no separate consumption figure. Also available in 1 kg kits.
Application
Where it is used.
- 01Moisture barrier under wooden and resilient floors sensitive to damp
- 02Treating concrete slabs and cementitious screeds with high residual moisture
- 03Consolidation treatment of weak cementitious substrates
- 04Dustproof coating over superficially inconsistent cement and anhydrite screeds
- 05Binder mixed with Quartz 1.2 for small smoothing and repair mortars
- 06Consolidating cementitious and anhydrite heating screeds once dry
Specification
Technical data.
| Coverage | 0.2-0.4 kg/m² per coat, depending on the evenness and absorption of the substrate (200 g/m² per application layer). |
|---|---|
| Pack size | 4 kg kit (3 kg comp. A plus 1 kg comp. B), 1 kg kit (0.750 kg comp. A plus 0.250 kg comp. B) |
| Pot life | 180 minutes at +10°C, 60 minutes at +23°C, 45 minutes at +30°C |
| Set to light foot traffic | 24 hours at +10°C, 12 hours at +23°C, 9 hours at +30°C |
| Colours | transparent (component A and component B transparent yellow) |
| Mixing ratio | component A : component B = 3 : 1 by weight |
| Application temperature | from +10°C to +30°C |
| Consistency | liquid |
| Storage and shelf life | 24 months in the original, closed packages stored under normal conditions. Protect from frost. |
| Density | 1.1 g/cm³ mixed (component A 1.12, component B 1.00) |
| Brookfield viscosity | 300 mPa·s (# 2 - rpm 50) mixed |
| Maximum residual moisture | 6% CM (carbide hygrometer - UNI 10329), 100% RH (probe hygrometer - ASTM F2170 - BS 8203) |
| Water vapour permeability | < 0.1 perm for dry film thickness ≥ 0.25 mm (ASTM E96-05) |
| Vapour emission reduction | > 96% for 0.25 mm dry film thickness (ASTM E96-05) |
| Adhesion to concrete | > 3 N/mm² (failure of substrate) |
| Complete hardening time | 7 days at +23°C |
| Service temperature | from -5°C to +80°C |
Typical values as Mapei prints them in the data sheet for Primer MF (a+b). Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
4 kg kit (3 kg comp. A plus 1 kg comp. B), 1 kg kit (0.750 kg comp. A plus 0.250 kg comp. B). Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 3 : 1 by weight. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
180 minutes at +10°C, 60 minutes at +23°C, 45 minutes at +30°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
24 months in the original, closed packages stored under normal conditions. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Primer MF (a+b), a primer manufactured by Mapei. Allow 0.4 to 0.8 kg/m2 over 2 coats, as published by the manufacturer. Mix at component A : component B = 3 : 1 by weight. Supplied in 4 kg kit (3 kg comp. a plus 1 kg comp. b), 1 kg kit (0.750 kg comp. a plus 0.250 kg comp. b). Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Primer MF (a+b) |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.4 to 0.8 kg/m2 over 2 coats |
| Pack size | 4 kg kit (3 kg comp. A plus 1 kg comp. B), 1 kg kit (0.750 kg comp. A plus 0.250 kg comp. B) |
| Mixing ratio | component A : component B = 3 : 1 by weight |
| Set time | 24 hours at +10°C, 12 hours at +23°C, 9 hours at +30°C |
| Pot life | 180 minutes at +10°C, 60 minutes at +23°C, 45 minutes at +30°C |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.2-0.4 kg/m² per coat, depending on the evenness and absorption of the substrate (200 g/m² per application layer).
4 kg kit (3 kg comp. A plus 1 kg comp. B), 1 kg kit (0.750 kg comp. A plus 0.250 kg comp. B)
You can download the official Primer MF (a+b) technical data sheet as a PDF directly from this page, revision 10-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Primer MF (a+b) in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Primer MF (a+b) you need, or describe the job and we will work it out with you.

