Primer SN A+B primer pack
Mapei's own picture. The pack we stock: 20 kg.

Mapei PrimerNo. 53 / 79

Primer SN A+B Technical Data Sheet (TDS)

Primer to EN 13813 B2.0 BFL-s1.

Primer SN is the two component fillerized epoxy primer under the Mapefloor resin systems, the Ultratop and Ultratop Loft ranges and resin mortar screeds. It is mixed 80 parts A to 20 parts B by weight and laid at 0.3 to 0.7 kg/m2 per coat by roller, or scratched on with a straight steel trowel or rake once 20 percent by weight of Quartz 0.5 has been stirred in, up to 50 percent in warm weather or on a rough slab.

  • Adhesion promoter for epoxy and polyurethane resin systems
  • Adhesion promoter for self levelling and multi layered resin systems
  • Adhesion promoter for resin mortar screeds
  • Primer under Ultratop, Ultratop Living and Ultratop Loft
  • Radon tight layer at 2 mm thickness to DIN ISO/TS 11665-13
  • Binder for resin mortars patching holes, cracks and surface unevenness
Data sheet1.6 MB

Build a list across products and send it once, or ask about Primer SN A+B on WhatsApp now.

Class
EN 13813 B2.0 BFL-s1
Consumption
0.3 to 0.7 kg/m²
Pack we stock
20 kg
Colour
component A neutral, component B straw-yellow, mix neutral

Mapei document 02901 · revision 11-2026

About Primer SN A+B

That filler is what separates it from Primer MF, the moisture barrier primer in the same range: Primer SN levels and seals pores rather than holding back damp. At 2 mm it is certified against radon diffusion to DIN ISO/TS 11665-13. The substrate decides it: 25 N/mm2 compressive, 1.5 N/mm2 tensile, moisture at most 4 percent and no rising damp, although locally moderately damp concrete is accepted.

Documentation

Related documentation

  • Technical data sheet

    Revision 11-2026 · 1.6 MB · PDF

    Primer SN A+B as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats

The sheet calls for 1 to 2.

As published in the data sheet

15.0 to 35.0kg

  • As printed: 0.3 to 0.7 kg/m2
  • 1 coat
  • over 50 m2

Order 1 to 2 packs of 20 kg kit

Send this quantity for a quote

Taken from the Primer SN A+B data sheet: CONSUMPTION: 0.3-0.7 kg/m2 per coat depending on the characteristics of the substrate such as roughness, absorbency, temperature, etc. No site allowance is added unless you turn one on. The rate is of the mixed product, batched 80 parts component A to 20 parts component B by weight, so it is ordered in kits and not in single drums. The 20 kg kit is 16 kg of A with 4 kg of B, and a 5 kg kit of 4 plus 1 kg is also published. The sheet prints one range and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published. Adding Quartz 0.5, which the sheet allows at 20 and up to 50 percent by weight for a scratch coat, increases the volume laid and is not in this figure.

Application

Where it is used.

  1. 01Adhesion promoter for epoxy and polyurethane resin systems
  2. 02Adhesion promoter for self levelling and multi layered resin systems
  3. 03Adhesion promoter for resin mortar screeds
  4. 04Primer under Ultratop, Ultratop Living and Ultratop Loft
  5. 05Radon tight layer at 2 mm thickness to DIN ISO/TS 11665-13
  6. 06Binder for resin mortars patching holes, cracks and surface unevenness

Specification

Technical data.

  • EN 13813 B2.0 BFL-s1
Primer SN A+B technical specifications from the manufacturer TDS
Coverage0.3-0.7 kg/m² per coat depending on the characteristics of the substrate such as roughness, absorbency, temperature
Pack size20 kg kit (16 kg comp. A plus 4 kg comp. B), 5 kg kit (4 kg comp. A plus 1 kg comp. B)
Pot life30 minutes at +20°C
Set to light foot trafficdust dry approx. 6 hours, set to foot traffic approx. 24 hours, full hardening approx. 7 days
Colourscomponent A neutral, component B straw-yellow, mix neutral
Mixing ratiocomponent A : component B = 80 : 20 by weight
Bond strengthEN 13892-8 3.20 N/mm² (requirement B1.5, typical value B2.0)
Application temperaturefrom +8°C to +35°C (ambient, material and substrate)
Consistencycomponent A and B liquid, mix thick fluid
Storage and shelf life24 months in the original sealed packaging, dry, between +5°C and +30°C, protect from frost
Densitymix 1 500 kg/m³ (component A 1.65 g/cm³, component B 0.99 g/cm³)
Recoat timemin. 12 hours and max. 48 hours without a quartz broadcast, min. 12 hours and no maximum with an excess broadcast
Compressive strength63 N/mm² (EN 196-1, 7 days at +23°C)
Shore hardnessShore D 78 (DIN 53505, 7 days at +23°C)
Cleaning agentethanol, before the product hardens

Typical values as Mapei prints them in the data sheet for Primer SN A+B. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg kit (16 kg comp. A plus 4 kg comp. B), 5 kg kit (4 kg comp. A plus 1 kg comp. B). Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

component A : component B = 80 : 20 by weight. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

30 minutes at +20°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

24 months in the original sealed packaging, dry, between +5°C and +30°C, protect from frost in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

Cleaning

ethanol, before the product hardens. Clean tools before the material hardens; once cured it comes off by mechanical means only.

For quantity surveyors

BOQ clause.

Supply and apply Primer SN A+B, a primer manufactured by Mapei, classified EN 13813 B2.0 BFL-s1. Allow 0.3 to 0.7 kg/m2, as published by the manufacturer. Mix at component A : component B = 80 : 20 by weight. Supplied in 20 kg kit (16 kg comp. a plus 4 kg comp. b), 5 kg kit (4 kg comp. a plus 1 kg comp. b). Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Primer SN A+B
ProductPrimer SN A+B
ManufacturerMapei
TypePrimer
ClassificationEN 13813 B2.0 BFL-s1
Consumption0.3 to 0.7 kg/m2
Pack size20 kg kit (16 kg comp. A plus 4 kg comp. B), 5 kg kit (4 kg comp. A plus 1 kg comp. B)
Mixing ratiocomponent A : component B = 80 : 20 by weight
Set timedust dry approx. 6 hours, set to foot traffic approx. 24 hours, full hardening approx. 7 days
Pot life30 minutes at +20°C
Unit of measurementm2

Frequently Asked Questions

Primer SN A+B is classified EN 13813 B2.0 BFL-s1 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.

As per the TDS: 0.3-0.7 kg/m² per coat depending on the characteristics of the substrate such as roughness, absorbency, temperature

20 kg kit (16 kg comp. A plus 4 kg comp. B), 5 kg kit (4 kg comp. A plus 1 kg comp. B)

You can download the official Primer SN A+B technical data sheet as a PDF directly from this page, revision 11-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Primer SN A+B in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Primer SN A+B you need, or describe the job and we will work it out with you.

Chat on WhatsApp