
Mapei AccessoryNo. 55 / 79
Quartz 1.2 ME Technical Data Sheet (TDS)
Mapei accessory.
Quartz 1.2 ME is the 1.2 mm grade of Mapei's quartz sand range, highly pure selected quartz supplied in a granulometric curve and blended into epoxy or polyurethane resin on site. One sheet covers five grades, 0.25, 0.5, 0.9, 1.2 and 1.9 ME, and the grade is the whole decision: Mapei publishes no consumption rate and no mix ratio here, and sends you to the data sheet for the resin or cementitious product being used to choose the mix and work out the quantity.
- Resin mortar for screeds and floor repairs
- Self levelling resin mortar for cementitious surfaces
- Skimming mortar for cementitious surfaces
- Broadcasting the surface of resin in multi layer coating systems
- Keying layers for resin or cementitious products
- Non slip surface finishes
Build a list across products and send it once, or ask about Quartz 1.2 ME on WhatsApp now.
- Pack we stock
- 25 kg
- Colour
- Off-white
Mapei document 09302
About Quartz 1.2 ME
It goes into resin mortar for screeds and floor repairs, self levelling and skimming mortar over cement, broadcast layers in multi layer resin coatings, keying layers and non slip finishes. Do not confuse it with Mapegrout Aggregate, which is 2 to 3 mm limestone for extending cementitious repair mortars rather than a resin filler. Off-white, 25 kg bags, 24 months in dry storage.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Quartz 1.2 ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
The sheet gives consumption as dependant on type of use. How much sand a job takes is fixed by the data sheet for the resin or cementitious product it is blended into, not by the area being covered.
There is no area calculator for Quartz 1.2 ME because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Resin mortar for screeds and floor repairs
- 02Self levelling resin mortar for cementitious surfaces
- 03Skimming mortar for cementitious surfaces
- 04Broadcasting the surface of resin in multi layer coating systems
- 05Keying layers for resin or cementitious products
- 06Non slip surface finishes
Specification
Technical data.
| Coverage | Dependant on type of use |
|---|---|
| Pack size | 25 kg bags |
| Colours | Off-white |
| Mixing ratio | Mixed with epoxy or polyurethane resin; the mix is set by the data sheet for that resin |
| Storage and shelf life | 24 months in the original packaging in a dry area |
| Grade | Quartz 1.2 ME |
| Range grades | Quartz 0.25 ME, Quartz 0.5 ME, Quartz 0.9 ME, Quartz 1.2 ME, Quartz 1.9 ME |
| Composition | Highly pure selected quartz, available in various mixes in a granulometric curve |
Typical values as Mapei prints them in the data sheet for Quartz 1.2 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Mixed with epoxy or polyurethane resin; the mix is set by the data sheet for that resin. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
24 months in the original packaging in a dry area in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Quartz 1.2 ME, a accessory manufactured by Mapei. Mix at Mixed with epoxy or polyurethane resin; the mix is set by the data sheet for that resin. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Quartz 1.2 ME |
|---|---|
| Manufacturer | Mapei |
| Type | Accessory |
| Pack size | 25 kg bags |
| Mixing ratio | Mixed with epoxy or polyurethane resin; the mix is set by the data sheet for that resin |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Dependant on type of use
25 kg bags
You can download the official Quartz 1.2 ME technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Quartz 1.2 ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Quartz 1.2 ME you need, or describe the job and we will work it out with you.