
Mapei Flooring AdhesiveNo. 56 / 79
Ultrabond Eco 375 Technical Data Sheet (TDS)
Flooring Adhesive to LOW ODOUR ICON ISO 16000-28.
Vinyl sheet is laid in long runs, and a short open time turns that into a race. Ultrabond Eco 375 is a vinyl floor adhesive with a 40 to 50 minute open time, long enough to spread a bay, lay the sheet and work the air out without fighting the adhesive.
- Vinyl sheet and vinyl tile flooring
- Resilient and LVT floor coverings
- Long run installations needing extended open time
- Occupied buildings needing low odour adhesives
- Commercial fit out flooring work
Build a list across products and send it once, or ask about Ultrabond Eco 375 on WhatsApp now.
- Class
- LOW ODOUR ICON ISO 16000-28
- Consumption
- 0.2 to 0.45 kg/m²
- Pack we stock
- 14 kg
- Colour
- pale beige
Mapei document 00233
About Ultrabond Eco 375
Consumption follows the trowel: about 200 g/m² by roller, 250 to 300 g/m² through a Mapei no. 1 and 350 to 450 g/m² through a no. 2. It sets in three to five hours, and carries an EC1 Plus very low emission classification with a low odour rating to ISO 16000-28, so it suits occupied buildings. Application runs from +15°C to +35°C. On a UAE handover, confirm the air conditioning is running before the first run is spread.
Documentation
Related documentation
Technical data sheet
2.4 MB · PDF
Ultrabond Eco 375 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
15.0 to 17.5kg
- Notch TKB B1: 0.3 to 0.35 kg/m2
- over 50 m2
Order 2 packs of 14 kg drum
Taken from the Ultrabond Eco 375 data sheet: CONSUMPTION: MAPEI trowel no. 1 approx. 250 to 300 g/m2, trowel no. 2 approx. 350 to 450 g/m2, roller approx. 200 g/m2, notch TKB A1/A2 approx. 200 to 300 g/m2, notch TKB B1 approx. 300 to 350 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. The sheet prints no TKB B2 row for this adhesive, so the TKB B1 row is the heaviest notch class it publishes.
Application
Where it is used.
- 01Vinyl sheet and vinyl tile flooring
- 02Resilient and LVT floor coverings
- 03Long run installations needing extended open time
- 04Occupied buildings needing low odour adhesives
- 05Commercial fit out flooring work
Specification
Technical data.
- LOW ODOUR ICON ISO 16000-28
- EMICODE EC1 Plus - very low emission
| Classification | LOW ODOUR ICON ISO 16000-28 |
|---|---|
| Coverage | Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-450 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m² |
| Pack size | 14 kg |
| Open time | 40-50 minutes |
| Set to light foot traffic | after 3-5 hours |
| Colours | pale beige |
| Application temperature | from +15°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions, Ultrabond Eco 375 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.25 g/cm³ |
| Ph | 8.5 |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco 375. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Ultrabond Eco 375 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco 375, a flooring adhesive manufactured by Mapei, classified LOW ODOUR ICON ISO 16000-28. Allow 0.2 to 0.45 kg/m2, as published by the manufacturer. Supplied in 14 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco 375 |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Classification | LOW ODOUR ICON ISO 16000-28 |
| Consumption | 0.2 to 0.45 kg/m2 |
| Pack size | 14 kg |
| Set time | after 3-5 hours |
| Open time | 40-50 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultrabond Eco 375 is classified LOW ODOUR ICON ISO 16000-28 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-450 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m²
14 kg
You can download the official Ultrabond Eco 375 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco 375 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco 375 you need, or describe the job and we will work it out with you.

