
Mapei Flooring AdhesiveNo. 57 / 79
Ultrabond Eco 380 Technical Data Sheet (TDS)
Mapei flooring adhesive.
Two bonding methods come out of one pail here. Ultrabond Eco 380 is a solvent free acrylic adhesive in water dispersion, used as a wet bed adhesive on absorbent screeds and as a transitional pressure sensitive adhesive on impervious, non absorbent substrates, where the film is left to air dry for 30 to 40 minutes until it is touch dry but still tacky.
- PVC floorings in commercial projects
- Homogeneous and heterogeneous PVC sheet coverings
- CV and multilayer PVC floor coverings
- Semi flexible vinyl floor tiles
- Textile and flocked textile floor coverings
- PVC wall coverings
Build a list across products and send it once, or ask about Ultrabond Eco 380 on WhatsApp now.
- Consumption
- 0.2 to 0.45 kg/m²
- Pack we stock
- 14 kg
- Colour
- light beige
Mapei document 00232
About Ultrabond Eco 380
Open time is 60 to 70 minutes, stretching to 120 minutes on a non absorbent substrate, and the strong initial tack and excellent residual tack hold dimensionally stable PVC sheet without creep. Light foot traffic follows after three to five hours, and the floor is rated for chair castors to EN 12529. Walls are covered as well as floors. The application range stops at +25°C, so in the UAE the air conditioning needs to be running before any of it is spread.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Ultrabond Eco 380 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
15.0 to 17.5kg
- Notch TKB B1: 0.3 to 0.35 kg/m2
- over 50 m2
Order 2 packs of 14 kg drum
Taken from the Ultrabond Eco 380 data sheet: CONSUMPTION: MAPEI trowel no. 1 approx. 250 to 300 g/m2, trowel no. 2 approx. 350 to 450 g/m2, roller approx. 200 g/m2, notch TKB A1/A2 approx. 200 to 300 g/m2, notch TKB B1 approx. 300 to 350 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. The sheet prints no TKB B2 row for this adhesive, so the TKB B1 row is the heaviest notch class it publishes.
Application
Where it is used.
- 01PVC floorings in commercial projects
- 02Homogeneous and heterogeneous PVC sheet coverings
- 03CV and multilayer PVC floor coverings
- 04Semi flexible vinyl floor tiles
- 05Textile and flocked textile floor coverings
- 06PVC wall coverings
Specification
Technical data.
| Coverage | Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-450 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m² |
|---|---|
| Pack size | 14 kg |
| Open time | 60-70 minutes |
| Set to light foot traffic | after 3-5 hours |
| Colours | light beige |
| Application temperature | from +15°C to +25°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions, Ultrabond 380 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| Ph | 8.5 |
| Density | 1.25 g/cm³ |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco 380. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Ultrabond 380 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco 380, a flooring adhesive manufactured by Mapei. Allow 0.2 to 0.45 kg/m2, as published by the manufacturer. Supplied in 14 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco 380 |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.2 to 0.45 kg/m2 |
| Pack size | 14 kg |
| Set time | after 3-5 hours |
| Open time | 60-70 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-450 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m²
14 kg
You can download the official Ultrabond Eco 380 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco 380 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco 380 you need, or describe the job and we will work it out with you.

