
Mapei Flooring AdhesiveNo. 58 / 79
Ultrabond Eco 4 LVT Technical Data Sheet (TDS)
Mapei flooring adhesive.
Ultrabond Eco 4 LVT is a dispersion adhesive from Mapei formulated specifically for luxury vinyl tile flooring. It is highly shear resistant, hard setting and tolerant of high temperatures, the failure points that generic adhesives hit when LVT is installed behind glass facades or in warm UAE interiors where planks expand and contract.
- Bonding luxury vinyl tiles and planks on interior floors and walls
- High temperature areas where LVT movement defeats generic adhesives
- Heavy wear domestic, commercial and industrial locations
- Level, absorbent substrates and underfloor heating systems
- Green building projects needing very low emission adhesives
Build a list across products and send it once, or ask about Ultrabond Eco 4 LVT on WhatsApp now.
- Consumption
- 0.2 to 0.3 kg/m²
- Pack we stock
- 14 kg
- Colour
- pale beige
Mapei document 07714
About Ultrabond Eco 4 LVT
Reinforcing fibres in the formulation make it suitable for heavy wear in domestic, commercial and industrial locations. It is a wet bed adhesive for interior floors and walls on level, absorbent substrates and works over underfloor heating. Very low emission of volatile organic compounds supports green building certification. If a project involves LVT planks or tiles, this is the dedicated Mapei specification. The full technical data sheet is available for download on this page.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Ultrabond Eco 4 LVT as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
10.0 to 15.0kg
- Notch TKB A1/A2: 0.2 to 0.3 kg/m2
- over 50 m2
Order 1 to 2 packs of 14 kg drum
Taken from the Ultrabond Eco 4 LVT data sheet: CONSUMPTION: MAPEI trowel no. 1 approx. 250 to 300 g/m2, notch TKB A1/A2 approx. 200 to 300 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. This is an LVT adhesive and the sheet publishes only the two fine notch rows, no TKB B1 or B2. Also supplied in 5 kg drums.
Application
Where it is used.
- 01Bonding luxury vinyl tiles and planks on interior floors and walls
- 02High temperature areas where LVT movement defeats generic adhesives
- 03Heavy wear domestic, commercial and industrial locations
- 04Level, absorbent substrates and underfloor heating systems
- 05Green building projects needing very low emission adhesives
Specification
Technical data.
| Coverage | Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² Notch TKB A1/A2: approx. 200-300 g/m² |
|---|---|
| Pack size | 14 kg |
| Open time | 20-30 minutes |
| Set to light foot traffic | 3-5 hours |
| Colours | pale beige |
| Application temperature | from +15°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions, Ultrabond Eco 4 LVT is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| Density | 1.20 g/cm³ |
| Ph | 7.5 |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco 4 LVT. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Ultrabond Eco 4 LVT is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco 4 LVT, a flooring adhesive manufactured by Mapei. Allow 0.2 to 0.3 kg/m2, as published by the manufacturer. Supplied in 14 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco 4 LVT |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.2 to 0.3 kg/m2 |
| Pack size | 14 kg |
| Set time | 3-5 hours |
| Open time | 20-30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² Notch TKB A1/A2: approx. 200-300 g/m²
14 kg
You can download the official Ultrabond Eco 4 LVT technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco 4 LVT in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco 4 LVT you need, or describe the job and we will work it out with you.

