
Mapei Flooring AdhesiveNo. 59 / 79
Ultrabond Eco 520 Technical Data Sheet (TDS)
Mapei flooring adhesive.
Linoleum behaves nothing like vinyl. A jute backed sheet needs an adhesive that grabs while it is still wet and builds legs quickly, or the roll moves as it is pressed down.
- Linoleum sheets and panels up to 4 mm thick
- Cork linoleum and corkment underlay
- Resilient wall coverings
- Underfloor heating systems
- Hospitals, shopping centres and airports
- Floors taking chair castors to EN 12529
Build a list across products and send it once, or ask about Ultrabond Eco 520 on WhatsApp now.
- Consumption
- 0.3 to 0.45 kg/m²
- Pack we stock
- 16 kg
- Colour
- light beige
Mapei document 00268
About Ultrabond Eco 520
Ultrabond Eco 520 is a solvent free single coat adhesive based on synthetic polymers in water dispersion, for linoleum in sheets and panels up to 4 mm thick as well as cork linoleum and corkment underlay. Waiting time is 10 to 20 minutes and open time 20 to 30 minutes, with light foot traffic after three to five hours and full service in 24 to 48 hours. Consumption is 0.30 to 0.45 kg/m² through a TKB B1, B2 or Mapei no. 2 trowel. EC1 Plus covers very low emission, and the floor is rated for castors to EN 12529. It bonds only to dry absorbent substrates, so test a UAE screed for residual damp first.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Ultrabond Eco 520 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
15.0 to 22.5kg
- TKB B1, B2 or MAPEI nr. 2: 0.3 to 0.45 kg/m2
- over 50 m2
Order 1 to 2 packs of 16 kg drum
Taken from the Ultrabond Eco 520 data sheet: CONSUMPTION: consumption varies with the uniformity of the substrate, the back of the flooring and the trowel used, from 0.30 to 0.45 kg/m2 (TKB B1, B2 or MAPEI nr. 2). No site allowance is added unless you turn one on. The sheet gives one range for all three notches rather than a row per trowel.
Application
Where it is used.
- 01Linoleum sheets and panels up to 4 mm thick
- 02Cork linoleum and corkment underlay
- 03Resilient wall coverings
- 04Underfloor heating systems
- 05Hospitals, shopping centres and airports
- 06Floors taking chair castors to EN 12529
Specification
Technical data.
- EMICODE EC1 Plus - very low emissions
| Coverage | Consumption varies with the uniformity of the substrate, the back of the flooring and the trowel used, from 0.30 to 0.45 kg/m² (TKB B1, B2 or MAPEI nr. 2). |
|---|---|
| Pack size | 16 kg |
| Open time | 20-30 minutes |
| Set to light foot traffic | 3-5 hours |
| Colours | light beige |
| Application temperature | from +15°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions Ultrabond 520 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| EMICODE | EC1 Plus - very low emissions |
| Density | 1.30 g/cm³ |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco 520. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
16 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions Ultrabond 520 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco 520, a flooring adhesive manufactured by Mapei. Allow 0.3 to 0.45 kg/m2, as published by the manufacturer. Supplied in 16 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco 520 |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.3 to 0.45 kg/m2 |
| Pack size | 16 kg |
| Set time | 3-5 hours |
| Open time | 20-30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies with the uniformity of the substrate, the back of the flooring and the trowel used, from 0.30 to 0.45 kg/m² (TKB B1, B2 or MAPEI nr. 2).
16 kg
You can download the official Ultrabond Eco 520 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco 520 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco 520 you need, or describe the job and we will work it out with you.

