
Mapei Flooring AdhesiveNo. 60 / 79
Ultrabond Eco 571 2K Technical Data Sheet (TDS)
Flooring Adhesive to MARINE MED 0474.
Rubber backings and outdoor exposure both defeat a dispersion adhesive, and this is the grade that answers them. Ultrabond Eco 571 2K is a two component, low viscosity polyurethane adhesive free of solvent and water, mixed 86 parts A to 14 parts B, for bonding rubber tiles and sheeting with any backing, homogeneous and heterogeneous PVC, semi rigid vinyl and FRP wall panels, indoors or out, on absorbent and non absorbent substrates.
- Rubber tiles and sheeting with any backing
- Homogeneous and heterogeneous PVC floor coverings
- Semi rigid vinyl floor coverings
- FRP panels on walls as finishing elements
- Internal and external bonding work
- Areas subject to heavy and intense traffic
Build a list across products and send it once, or ask about Ultrabond Eco 571 2K on WhatsApp now.
- Class
- MARINE MED 0474
- Consumption
- 0.35 to 1 kg/m²
- Pack we stock
- 10 kg
- Colour
- grey brown
Mapei document 00235
About Ultrabond Eco 571 2K
Pot life is about 30 minutes, open time 40 to 50 minutes, and a covering can still be adjusted at 70 to 90 minutes, with light foot traffic after 12 to 24 hours and full set in roughly three days. Consumption runs 0.35 to 1 kg/m² depending on trowel size. Mapei advises laying during the cooler hours of the day in high temperatures, which on a UAE site means an early start.
Documentation
Related documentation
Technical data sheet
0.8 MB · PDF
Ultrabond Eco 571 2K as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
40.0 to 50.0kg
- MAPEI trowel No. 4: 0.8 to 1 kg/m2
- over 50 m2
Order 4 to 5 packs of 10 kg drum
Taken from the Ultrabond Eco 571 2K data sheet: CONSUMPTION: MAPEI trowel No. 1 0.35 to 0.45 kg/m2, trowel No. 2 0.45 to 0.55 kg/m2, trowel No. 3 0.6 to 0.8 kg/m2, trowel No. 4 0.8 to 1 kg/m2. No site allowance is added unless you turn one on. This sheet prints no TKB notch row, so the default shown is the largest trowel it publishes, No. 4, which the sheet pairs with rippled, uneven or rough backs. A smooth backed covering takes trowel No. 1 or No. 2, 0.35 to 0.55 kg/m2, so pick the row that matches the covering. Two component, pre dosed as component A 8.6 parts and component B 1.4 parts by weight. Also supplied in 5 kg drums.
Application
Where it is used.
- 01Rubber tiles and sheeting with any backing
- 02Homogeneous and heterogeneous PVC floor coverings
- 03Semi rigid vinyl floor coverings
- 04FRP panels on walls as finishing elements
- 05Internal and external bonding work
- 06Areas subject to heavy and intense traffic
Specification
Technical data.
- MARINE MED 0474
- EMICODE EC1 Plus - very low emission
| Classification | MARINE MED 0474 |
|---|---|
| Coverage | Consumption varies according to the uniformity of the substrate or the backing of the floor covering (and therefore, on the type of trowel used): MAPEI trowel No. 1: 0.35-0.45 kg/m²; MAPEI trowel No. 2: 0.45-0.55 kg/m²; MAPEI trowel No. 3: 0.6-0.8 kg/m²; MAPEI trowel No. 4: 0.8-1 kg/m². |
| Pack size | 10 kg |
| Pot life | approx. 30 minutes |
| Open time | 40-50 minutes |
| Adjustment time | 70-90 minutes |
| Set to light foot traffic | after 12-24 hours |
| Colours | grey brown |
| Mixing ratio | component A : component B: = 86 : 14 |
| Consistency | thick paste fluid liquid |
| Storage and shelf life | Under normal conditions, Ultrabond 571 2K remains stable for at least 12 months if stored in its sealed, original container. Keep Ultrabond 571 2K away from freezing conditions during transport and storage, and avoid exposing it to temperatures lower than +5°C for long periods. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.65 g/cm³ 1.2 g/cm³ |
| Dry solids | 100% |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco 571 2K. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B: = 86 : 14. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 30 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Under normal conditions, Ultrabond 571 2K remains stable for at least 12 months if stored in its sealed, original container. Keep Ultrabond 571 2K away from freezing conditions during transport and storage, and avoid exposing it to temperatures lower than +5°C for long periods. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco 571 2K, a flooring adhesive manufactured by Mapei, classified MARINE MED 0474. Allow 0.35 to 1 kg/m2, as published by the manufacturer. Mix at component A : component B: = 86 : 14. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco 571 2K |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Classification | MARINE MED 0474 |
| Consumption | 0.35 to 1 kg/m2 |
| Pack size | 10 kg |
| Mixing ratio | component A : component B: = 86 : 14 |
| Set time | after 12-24 hours |
| Pot life | approx. 30 minutes |
| Open time | 40-50 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultrabond Eco 571 2K is classified MARINE MED 0474 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Consumption varies according to the uniformity of the substrate or the backing of the floor covering (and therefore, on the type of trowel used): MAPEI trowel No. 1: 0.35-0.45 kg/m²; MAPEI trowel No. 2: 0.45-0.55 kg/m²; MAPEI trowel No. 3: 0.6-0.8 kg/m²; MAPEI trowel No. 4: 0.8-1 kg/m².
10 kg
You can download the official Ultrabond Eco 571 2K technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco 571 2K in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco 571 2K you need, or describe the job and we will work it out with you.

