
Mapei Flooring AdhesiveNo. 66 / 79
Ultrabond Eco S948 1K Technical Data Sheet (TDS)
Flooring Adhesive to ULTRABOND S948 1k_schwarz.
Board width decides the adhesive on a wood floor. Ultrabond Eco S948 1K is a one component silylated polymer adhesive, free of water, solvents, amines and epoxy resin, for all types of multi layer pre-finished wood flooring and for medium sized solid planks up to 15 cm wide.
- Multi layer pre-finished wood flooring
- Solid wood planks up to 15 cm wide
- Cementitious and anhydrite screeds
- Mapecem and Topcem based screeds
- Old wood, ceramic, marble and terrazzo floors
- Heated substrates
Build a list across products and send it once, or ask about Ultrabond Eco S948 1K on WhatsApp now.
- Class
- ULTRABOND S948 1k_schwarz
- Consumption
- 0.8 to 1.2 kg/m²
- Pack we stock
- 15 kg
- Colour
- light beige
Mapei document 02511
About Ultrabond Eco S948 1K
It bonds to cementitious and anhydrite screeds, to Mapecem and Topcem based screeds, and to old wood, ceramic, marble and terrazzo, heated substrates included. No catalyst and no mixing, and Mapei quotes 20 to 30 percent more yield than a conventional two component adhesive at 800 to 1,200 g/m². A skin forms at 40 minutes, boards can be adjusted for 100 minutes, and the floor is walkable in about 12 hours. Where a UAE screed still holds residual moisture, the sheet sends you to a waterproofing primer before this adhesive.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Ultrabond Eco S948 1K as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
40.0 to 60.0kg
- MAPEI notched trowel for wood: 0.8 to 1.2 kg/m2
- over 50 m2
Order 3 to 4 packs of 15 kg plastic drum
Taken from the Ultrabond Eco S948 1K data sheet: CONSUMPTION: 800 to 1200 g/m2, spread with a MAPEI notched trowel for wood. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Also supplied as plastic drums holding one or two 7 kg aluminium bags.
Application
Where it is used.
- 01Multi layer pre-finished wood flooring
- 02Solid wood planks up to 15 cm wide
- 03Cementitious and anhydrite screeds
- 04Mapecem and Topcem based screeds
- 05Old wood, ceramic, marble and terrazzo floors
- 06Heated substrates
Specification
Technical data.
- ULTRABOND S948 1k_schwarz
- EMICODE EC1 Plus - very low emission
| Classification | ULTRABOND S948 1k_schwarz |
|---|---|
| Coverage | 800-1200 g/m². |
| Pack size | 15 kg |
| Open time | (formation of surface skin): 40 minutes |
| Adjustment time | 100 minutes |
| Set to light foot traffic | approx. 12 hours |
| Colours | light beige |
| Consistency | creamy paste |
| Storage and shelf life | 12 months in its original, well-sealed container stored under normal conditions. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.65 ± 0.05 g/cm³ |
| Dry solids | 98% |
| Elongation | 100% |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco S948 1K. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in its original, well-sealed container stored under normal conditions. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco S948 1K, a flooring adhesive manufactured by Mapei, classified ULTRABOND S948 1k_schwarz. Allow 0.8 to 1.2 kg/m2, as published by the manufacturer. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco S948 1K |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Classification | ULTRABOND S948 1k_schwarz |
| Consumption | 0.8 to 1.2 kg/m2 |
| Pack size | 15 kg |
| Set time | approx. 12 hours |
| Open time | (formation of surface skin): 40 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultrabond Eco S948 1K is classified ULTRABOND S948 1k_schwarz according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: 800-1200 g/m².
15 kg
You can download the official Ultrabond Eco S948 1K technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco S948 1K in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco S948 1K you need, or describe the job and we will work it out with you.

