
Mapei Flooring AdhesiveNo. 67 / 79
Ultrabond Eco S955 1K Technical Data Sheet (TDS)
Flooring Adhesive to LOW ODOUR ICON ISO 16000-28.
Where the S948 grade stops at medium planks, this one takes every format. Ultrabond Eco S955 1K is a one component silylated polymer adhesive for solid wooden floors and pre-finished multi layer floors of all types and formats, from lamparquet and slats through to floorboards, laid over cementitious or anhydrite screeds, old wood, ceramic, marble and terrazzo, and over heated substrates.
- Solid wooden floors of all types and formats
- Pre-finished multi layer wooden floors
- Lamparquet, slats and floorboards
- Cementitious and anhydrite screeds
- Old wood, ceramic, marble and terrazzo floors
- Heated substrates
Build a list across products and send it once, or ask about Ultrabond Eco S955 1K on WhatsApp now.
- Class
- LOW ODOUR ICON ISO 16000-28
- Consumption
- 0.8 to 1.2 kg/m²
- Pack we stock
- 15 kg
- Colour
- beige or brown
Mapei document 00270
About Ultrabond Eco S955 1K
It is the softer and more extensible of the two: Shore A hardness 45, elongation at break 120 percent, and a wood to concrete bond above 2 N/mm², which is what absorbs the movement of a wide solid board. Wood is laid within 50 to 60 minutes, adjustment runs to 120 minutes and the floor is walkable in roughly 12 hours. Consumption is 800 to 1,200 g/m². Low odour to ISO 16000-28 suits an occupied UAE villa.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Ultrabond Eco S955 1K as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
40.0 to 60.0kg
- MAPEI notched trowel for wood: 0.8 to 1.2 kg/m2
- over 50 m2
Order 3 to 4 packs of 15 kg plastic drum
Taken from the Ultrabond Eco S955 1K data sheet: CONSUMPTION: 800 to 1200 g/m2, spread with a MAPEI notched trowel for wood. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Solid wooden floors of all types and formats
- 02Pre-finished multi layer wooden floors
- 03Lamparquet, slats and floorboards
- 04Cementitious and anhydrite screeds
- 05Old wood, ceramic, marble and terrazzo floors
- 06Heated substrates
Specification
Technical data.
- LOW ODOUR ICON ISO 16000-28
- EMICODE EC1 Plus - very low emission
| Classification | LOW ODOUR ICON ISO 16000-28 |
|---|---|
| Coverage | 800-1200 g/m². |
| Pack size | 15 kg |
| Open time | (formation of surface skin): 40 minutes |
| Adjustment time | 120 minutes |
| Set to light foot traffic | approx. 12 hours |
| Colours | beige or brown |
| Consistency | creamy paste |
| Storage and shelf life | 12 months in its original, well-sealed container stored under normal conditions. Easy opening of the bucket Easy and fast removal of the sealing film Excellent stability of the product Excellent workability and rib stability Cleaning large format of pre-finished parquet with Cleaner L |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.65 ± 0.05 g/cm³ |
| Dry solids | 98% |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco S955 1K. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in its original, well-sealed container stored under normal conditions. Easy opening of the bucket Easy and fast removal of the sealing film Excellent stability of the product Excellent workability and rib stability Cleaning large format of pre-finished parquet with Cleaner L in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco S955 1K, a flooring adhesive manufactured by Mapei, classified LOW ODOUR ICON ISO 16000-28. Allow 0.8 to 1.2 kg/m2, as published by the manufacturer. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco S955 1K |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Classification | LOW ODOUR ICON ISO 16000-28 |
| Consumption | 0.8 to 1.2 kg/m2 |
| Pack size | 15 kg |
| Set time | approx. 12 hours |
| Open time | (formation of surface skin): 40 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultrabond Eco S955 1K is classified LOW ODOUR ICON ISO 16000-28 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: 800-1200 g/m².
15 kg
You can download the official Ultrabond Eco S955 1K technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco S955 1K in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco S955 1K you need, or describe the job and we will work it out with you.

