Ultrabond Eco TX 2 flooring adhesive pack
Mapei's own picture. The pack we stock: 16 kg.

Mapei Flooring AdhesiveNo. 68 / 79

Ultrabond Eco TX 2 Technical Data Sheet (TDS)

Mapei flooring adhesive.

Carpet and textile coverings need grab before they need strength. Ultrabond Eco TX 2 is an adhesive for textile floorings with high initial grab and a long open time of 20 to 30 minutes, so a broadloom run can be positioned and then held without creeping.

  • Broadloom carpet and textile flooring
  • Carpet tiles and textile coverings
  • Adhesives and tackifiers for textile flooring
  • Commercial fit out flooring work
  • Installations needing high initial grab
Data sheet0.3 MB

Build a list across products and send it once, or ask about Ultrabond Eco TX 2 on WhatsApp now.

Consumption
0.3 to 0.45 kg/m²
Pack we stock
16 kg
Colour
light beige

About Ultrabond Eco TX 2

Consumption depends on the trowel: roughly 300 to 350 g/m² through a TKB B1, and 350 to 450 g/m² through a Mapei no. 2 or no. 3 or a TKB B2. It sets in three to five hours and is applied between +15°C and +35°C as a creamy light beige paste. Supplied in 16 kg pails. On a UAE fit out keep pails out of the sun, because a warm paste spreads thinner than the trowel notch intends.

Documentation

Related documentation

  • Technical data sheet

    Revision 12-2019 · 0.3 MB · PDF

    Ultrabond Eco TX 2 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

15.0 to 17.5kg

  • TKB B1 trowel: 0.3 to 0.35 kg/m2
  • over 50 m2

Order 1 to 2 packs of 16 kg drum

Send this quantity for a quote

Taken from the Ultrabond Eco TX 2 data sheet: CONSUMPTION: MAPEI n. 2-3 trowel approx. 350 to 450 g/m2, TKB B1 trowel approx. 300 to 350 g/m2, TKB B2 trowel approx. 350 to 450 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. A needlefelt and textile adhesive, so the sheet prints no fine notch row. TKB B1 is the sheet's standard notch and is the default here; a textile backed or heavy sheet covering takes TKB B2, and the MAPEI n. 2-3 trowel row, both 350 to 450 g/m2.

Application

Where it is used.

  1. 01Broadloom carpet and textile flooring
  2. 02Carpet tiles and textile coverings
  3. 03Adhesives and tackifiers for textile flooring
  4. 04Commercial fit out flooring work
  5. 05Installations needing high initial grab

Specification

Technical data.

Ultrabond Eco TX 2 technical specifications from the manufacturer TDS
CoverageConsumption varies with uniformity of substrate, the back of the flooring and the type of trowel used. MAPEI n. 2-3 trowel: approx. 350-450 g/m² TKB B1 trowel: approx. 300-350 g/m² TKB B2 trowel: approx. 350-450 g/m² To repair cracks in the substrate, consolidate and waterproof screeds, form new fas
Pack size16 kg
Open time20-30 min
Set to light foot trafficafter 3-5 hours
Colourslight beige
Application temperaturefrom +15°C to +35°C
Consistencycreamy paste
Storage and shelf lifeUnder normal conditions Ultrabond Eco TX2 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost.
Ph8.5
Density1.35 g/cm³

Typical values as Mapei prints them in the data sheet for Ultrabond Eco TX 2. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

16 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Under normal conditions Ultrabond Eco TX2 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultrabond Eco TX 2, a flooring adhesive manufactured by Mapei. Allow 0.3 to 0.45 kg/m2, as published by the manufacturer. Supplied in 16 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultrabond Eco TX 2
ProductUltrabond Eco TX 2
ManufacturerMapei
TypeFlooring Adhesive
Consumption0.3 to 0.45 kg/m2
Pack size16 kg
Set timeafter 3-5 hours
Open time20-30 min
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and the type of trowel used. MAPEI n. 2-3 trowel: approx. 350-450 g/m² TKB B1 trowel: approx. 300-350 g/m² TKB B2 trowel: approx. 350-450 g/m² To repair cracks in the substrate, consolidate and waterproof screeds, form new fas

16 kg

You can download the official Ultrabond Eco TX 2 technical data sheet as a PDF directly from this page, revision 12-2019, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultrabond Eco TX 2 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco TX 2 you need, or describe the job and we will work it out with you.

Chat on WhatsApp