
Mapei Flooring AdhesiveNo. 69 / 79
Ultrabond Eco V4 SP Technical Data Sheet (TDS)
Mapei flooring adhesive.
Ultrabond Eco V4 SP is a universal adhesive in water dispersion from Mapei, developed for PVC and rubber flooring in commercial projects and usable with all common floor covering types. It is a wet bed adhesive for level, absorbent substrates on interior floors and walls, including areas over underfloor heating, and its very low emission of volatile organic compounds supports healthy indoor air on offices, retail and healthcare fit outs.
- Bonding PVC and rubber flooring in commercial projects
- Universal bonding of common resilient floor coverings
- Interior floors and walls on level, absorbent substrates
- Installations over underfloor heating systems
- Areas with static and dynamic loads including intense foot traffic
Build a list across products and send it once, or ask about Ultrabond Eco V4 SP on WhatsApp now.
- Consumption
- 0.2 to 0.45 kg/m²
- Pack we stock
- 5 kg
- Colour
- pale beige
About Ultrabond Eco V4 SP
The adhesive handles static and dynamic loads, including intense foot traffic, which is why it is a standard specification for resilient flooring in UAE commercial interiors. Being solvent free, it is safe to apply in occupied buildings. Coverage per square metre depends on the trowel and covering type, as stated in the technical data sheet available for download on this page.
Documentation
Related documentation
Technical data sheet
Revision 6-2022 · 2.6 MB · PDF
Ultrabond Eco V4 SP as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
15.0 to 17.5kg
- Notch TKB B1: 0.3 to 0.35 kg/m2
- over 50 m2
Order 2 packs of 14 kg drum
Taken from the Ultrabond Eco V4 SP data sheet: CONSUMPTION: trowel no. 1 approx. 250 to 300 g/m2, trowel no. 2 approx. 350 to 400 g/m2, roller approx. 200 g/m2, notch TKB A1/A2 approx. 200 to 300 g/m2, TKB B1 approx. 300 to 350 g/m2, TKB B2 approx. 350 to 450 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Also supplied in 5 kg drums. Consumption varies with the uniformity of the substrate and the backing of the covering, so the sheet gives a range for each trowel.
Application
Where it is used.
- 01Bonding PVC and rubber flooring in commercial projects
- 02Universal bonding of common resilient floor coverings
- 03Interior floors and walls on level, absorbent substrates
- 04Installations over underfloor heating systems
- 05Areas with static and dynamic loads including intense foot traffic
Specification
Technical data.
| Classification | LOW ODOUR ICON ISO 16000-28, MARINE MED 0474 |
|---|---|
| Coverage | Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-400 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m² Notch TKB B2: approx. |
| Pack size | Ultrabond Eco V4SP is available in 5 kg and 14 kg drums. |
| Open time | 30-40 minutes |
| Set to light foot traffic | after 3-5 hours |
| Colours | pale beige |
| Application temperature | from +15°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions, Ultrabond Eco V4SP is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| Ph | 7.5 |
| Density | 1.20 g/cm³ |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco V4 SP. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
Ultrabond Eco V4SP is available in 5 kg and 14 kg drums.. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Ultrabond Eco V4SP is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco V4 SP, a flooring adhesive manufactured by Mapei. Allow 0.2 to 0.45 kg/m2, as published by the manufacturer. Supplied in ultrabond eco v4sp is available in 5 kg and 14 kg drums.. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco V4 SP |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.2 to 0.45 kg/m2 |
| Pack size | Ultrabond Eco V4SP is available in 5 kg and 14 kg drums. |
| Set time | after 3-5 hours |
| Open time | 30-40 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-400 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m² Notch TKB B2: approx.
Ultrabond Eco V4SP is available in 5 kg and 14 kg drums.
You can download the official Ultrabond Eco V4 SP technical data sheet as a PDF directly from this page, revision 6-2022, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco V4 SP in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco V4 SP you need, or describe the job and we will work it out with you.

