
Mapei Flooring AdhesiveNo. 70 / 79
Ultrabond Eco VS60 Technical Data Sheet (TDS)
Mapei flooring adhesive.
Mixed coverings on one job usually mean mixed adhesives, which is what a multi purpose grade avoids. Ultrabond Eco VS60 is a strong tack adhesive for vinyl, textile, linoleum and LVT, on floors and on wall coverings, so a fit out with several finishes can run on a single product.
- Vinyl, linoleum and LVT floor coverings
- Textile and carpet coverings
- Wall coverings as well as floors
- Multipurpose fit out adhesive applications
- Commercial interiors with mixed finishes
Build a list across products and send it once, or ask about Ultrabond Eco VS60 on WhatsApp now.
- Consumption
- 0.2 to 0.45 kg/m²
- Pack we stock
- 16 kg
- Colour
- pale beige
Mapei document 05868
About Ultrabond Eco VS60
Open time is 20 to 30 minutes and the covering sets in three to five hours. Consumption follows the tool: roughly 200 g/m² by roller, 250 to 300 g/m² through a Mapei no. 1, and 350 to 450 g/m² through a no. 2 or no. 3. It is a creamy pale beige paste applied from +15°C to +35°C, supplied in 16 kg pails. In the UAE check the substrate is dry before any resilient covering is bonded.
Documentation
Related documentation
Technical data sheet
1.6 MB · PDF
Ultrabond Eco VS60 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
15.0 to 17.5kg
- TKB B1: 0.3 to 0.35 kg/m2
- over 50 m2
Order 1 to 2 packs of 16 kg bucket
Taken from the Ultrabond Eco VS60 data sheet: CONSUMPTION: MAPEI trowel no. 1 approx. 250 to 300 g/m2, trowel no. 2 / 3 approx. 350 to 450 g/m2, roller approx. 200 g/m2, TKB A1/A2 approx. 200 to 300 g/m2, TKB B1 approx. 300 to 350 g/m2, TKB B2 approx. 350 to 450 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Vinyl, linoleum and LVT floor coverings
- 02Textile and carpet coverings
- 03Wall coverings as well as floors
- 04Multipurpose fit out adhesive applications
- 05Commercial interiors with mixed finishes
Specification
Technical data.
| Coverage | Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2 / 3: approx. 350-450 g/m² Roller: approx. 200 g/m² TKB A1/A2: approx. 200-300 g/m² TKB B1: approx. 300-350 g/m² TKB B2: approx. 350-450 g/m² |
|---|---|
| Pack size | 16 kg |
| Open time | 20-30 minutes |
| Set to light foot traffic | 3-5 hours |
| Colours | pale beige |
| Application temperature | +15°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Under normal conditions, Ultrabond Eco VS60 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. |
| Ph | 8.0 |
| Density | 1.35 g/cm³ |
Typical values as Mapei prints them in the data sheet for Ultrabond Eco VS60. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
16 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Under normal conditions, Ultrabond Eco VS60 is stable for at least 12 months in its original sealed packaging. Avoid prolonged exposure to frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond Eco VS60, a flooring adhesive manufactured by Mapei. Allow 0.2 to 0.45 kg/m2, as published by the manufacturer. Supplied in 16 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond Eco VS60 |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.2 to 0.45 kg/m2 |
| Pack size | 16 kg |
| Set time | 3-5 hours |
| Open time | 20-30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2 / 3: approx. 350-450 g/m² Roller: approx. 200 g/m² TKB A1/A2: approx. 200-300 g/m² TKB B1: approx. 300-350 g/m² TKB B2: approx. 350-450 g/m²
16 kg
You can download the official Ultrabond Eco VS60 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond Eco VS60 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco VS60 you need, or describe the job and we will work it out with you.

