Ultrabond Eco VS90 Plus flooring adhesive pack
Mapei's own picture. The pack we stock: 16 kg.

Mapei Flooring AdhesiveNo. 71 / 79

Ultrabond Eco VS90 Plus Technical Data Sheet (TDS)

Flooring Adhesive to LOW ODOUR ICON ISO 16000-28.

Service temperature is the specification most people forget when choosing a flooring adhesive. Ultrabond Eco VS90 Plus is a high temperature universal adhesive for resilient and textile floorings, including rubber, polyolefin and polyurethane backed materials, formulated to keep its hold where a standard dispersion adhesive would soften.

  • Resilient and LVT floor coverings
  • Textile and carpet coverings
  • Rubber, polyolefin and polyurethane backed materials
  • Floors exposed to elevated service temperatures
  • Glazed areas with high solar gain
Data sheet2.4 MB

Build a list across products and send it once, or ask about Ultrabond Eco VS90 Plus on WhatsApp now.

Class
LOW ODOUR ICON ISO 16000-28
Consumption
0.2 to 0.45 kg/m²
Pack we stock
16 kg
Colour
beige

Mapei document 05855

About Ultrabond Eco VS90 Plus

Open time is 20 to 30 minutes, the covering sets in three to five hours, and consumption runs about 200 g/m² by roller, 250 to 300 g/m² through a Mapei no. 1 and 350 to 450 g/m² through a no. 2. It carries a low odour rating to ISO 16000-28 and is applied from +15°C to +35°C in 16 kg pails. This is the grade for a UAE floor behind glazing, where solar gain lifts the surface well above room air.

Documentation

Related documentation

  • Technical data sheet

    2.4 MB · PDF

    Ultrabond Eco VS90 Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

15.0 to 17.5kg

  • Notch TKB B1: 0.3 to 0.35 kg/m2
  • over 50 m2

Order 2 packs of 14 kg drum

Send this quantity for a quote

Taken from the Ultrabond Eco VS90 Plus data sheet: CONSUMPTION: MAPEI trowel no. 1 approx. 250 to 300 g/m2, trowel no. 2 approx. 350 to 450 g/m2, roller approx. 200 g/m2, notch TKB A1/A2 approx. 200 to 300 g/m2, notch TKB B1 approx. 300 to 350 g/m2, notch TKB B2 approx. 350 to 450 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. The sheet states 5 and 14 kg drums. Earlier catalogue data for this product listed a 16 kg drum, so confirm the pack held in stock before quoting a drum count.

Application

Where it is used.

  1. 01Resilient and LVT floor coverings
  2. 02Textile and carpet coverings
  3. 03Rubber, polyolefin and polyurethane backed materials
  4. 04Floors exposed to elevated service temperatures
  5. 05Glazed areas with high solar gain

Specification

Technical data.

  • LOW ODOUR ICON ISO 16000-28
Ultrabond Eco VS90 Plus technical specifications from the manufacturer TDS
ClassificationLOW ODOUR ICON ISO 16000-28
CoverageConsumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-450 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m² Notch TKB B2: approx.
Pack size16 kg
Open time20-30 minutes
Set to light foot traffic3-5 hours
Coloursbeige
Application temperaturefrom +15°C to +35°C
Consistencycreamy paste
Storage and shelf lifeUnder normal conditions, Ultrabond Eco VS90 Plus is stable for at least 12 months in its original sealed packaging. Protect from frost.
Density1.25 g/cm³

Typical values as Mapei prints them in the data sheet for Ultrabond Eco VS90 Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

16 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Under normal conditions, Ultrabond Eco VS90 Plus is stable for at least 12 months in its original sealed packaging. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultrabond Eco VS90 Plus, a flooring adhesive manufactured by Mapei, classified LOW ODOUR ICON ISO 16000-28. Allow 0.2 to 0.45 kg/m2, as published by the manufacturer. Supplied in 16 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultrabond Eco VS90 Plus
ProductUltrabond Eco VS90 Plus
ManufacturerMapei
TypeFlooring Adhesive
ClassificationLOW ODOUR ICON ISO 16000-28
Consumption0.2 to 0.45 kg/m2
Pack size16 kg
Set time3-5 hours
Open time20-30 minutes
Unit of measurementm2

Frequently Asked Questions

Ultrabond Eco VS90 Plus is classified LOW ODOUR ICON ISO 16000-28 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.

As per the TDS: Consumption varies with uniformity of substrate, the back of the flooring and type of trowel used. MAPEI trowel no. 1: approx. 250-300 g/m² MAPEI trowel no. 2: approx. 350-450 g/m² Roller: approx. 200 g/m² Notch TKB A1/A2: approx. 200-300 g/m² Notch TKB B1: approx. 300-350 g/m² Notch TKB B2: approx.

16 kg

You can download the official Ultrabond Eco VS90 Plus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultrabond Eco VS90 Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond Eco VS90 Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp