
Mapei Flooring AdhesiveNo. 72 / 79
Ultrabond P980 1K Technical Data Sheet (TDS)
Mapei flooring adhesive.
One component adhesives remove the mixing error, and for laminate that matters more than raw strength. Ultrabond P980 1K is a ready mixed one component polyurethane adhesive for engineered laminated parquet, pre assembled panels and laminate on all types of substrate, with no solvent, free amine or epoxy resin content and an EC1 Plus emission classification.
- Engineered laminated parquet
- Pre assembled wood panels
- All types and formats of laminate
- Installation over heated sublayers
- Installers avoiding epoxy polyurethane adhesives
Build a list across products and send it once, or ask about Ultrabond P980 1K on WhatsApp now.
- Consumption
- 0.8 to 1 kg/m²
- Pack we stock
- 15 kg
- Colour
- Beige
Mapei document 07200
About Ultrabond P980 1K
It is spread at 800 to 1,000 g/m² and particularly recommended over heated sublayers. Working times are long for a reactive adhesive: a skin forms at 110 minutes, boards can be adjusted for three hours and the floor sets in about 12 hours. The application range is +10°C to +25°C, narrower than most of this range and the one UAE detail to plan around, because the air conditioning has to be running before the first board goes down.
Documentation
Related documentation
Technical data sheet
0.9 MB · PDF
Ultrabond P980 1K as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
40.0 to 50.0kg
- MAPEI notched trowel for wood: 0.8 to 1 kg/m2
- over 50 m2
Order 3 to 4 packs of 15 kg aluminium bag in a plastic drum
Taken from the Ultrabond P980 1K data sheet: CONSUMPTION: 800 to 1000 g/m2, spread with a MAPEI notched trowel for wood. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Engineered laminated parquet
- 02Pre assembled wood panels
- 03All types and formats of laminate
- 04Installation over heated sublayers
- 05Installers avoiding epoxy polyurethane adhesives
Specification
Technical data.
- EMICODE EC1 Plus - very low emission
| Coverage | 800-1000 g/m². |
|---|---|
| Pack size | 15 kg |
| Open time | (formation of skin): 110 ± 5 min |
| Adjustment time | 3 hours |
| Set to light foot traffic | approximately 12 hours |
| Colours | Beige |
| Application temperature | from +10°C to +25°C |
| Consistency | creamy paste |
| Storage and shelf life | Store Ultrabond P980 1K for 12 months in its original, well-sealed packaging stored under normal conditions. When transported over long distances, an insulated container may be needed |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.45 ± 0.05 g/cm³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Ultrabond P980 1K. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store Ultrabond P980 1K for 12 months in its original, well-sealed packaging stored under normal conditions. When transported over long distances, an insulated container may be needed in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond P980 1K, a flooring adhesive manufactured by Mapei. Allow 0.8 to 1 kg/m2, as published by the manufacturer. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond P980 1K |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.8 to 1 kg/m2 |
| Pack size | 15 kg |
| Set time | approximately 12 hours |
| Open time | (formation of skin): 110 ± 5 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 800-1000 g/m².
15 kg
You can download the official Ultrabond P980 1K technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond P980 1K in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond P980 1K you need, or describe the job and we will work it out with you.

