
Mapei Flooring AdhesiveNo. 73 / 79
Ultrabond P990 1K Technical Data Sheet (TDS)
Mapei flooring adhesive.
Ultrabond P990 1K is a one component, ready to use polyurethane adhesive from Mapei for interlocking prefinished parquet with a multilayer support, in any format and wood species. It cures with ambient humidity into a tough, elastic bond that follows the natural movement of wood without transmitting stress to the substrate, and being one component there is no mixing and no waste.
- Bonding interlocking prefinished multilayer parquet
- Engineered wood slats and planks of any format and species
- Projects needing a ready to use one component adhesive
- Wood floors where an elastic bond must absorb natural movement
Build a list across products and send it once, or ask about Ultrabond P990 1K on WhatsApp now.
- Consumption
- 0.8 to 1 kg/m²
- Pack we stock
- 15 kg
- Colour
- Pale
Mapei document 00279
About Ultrabond P990 1K
It is not intended for varnish backed prefinished solid wood or traditional solid parquet without interlocking, as the technical data sheet states. For UAE projects installing engineered click or tongue and groove prefinished floors, slats or planks, Ultrabond P990 1K keeps installation simple and reliable. Download the complete technical data sheet with consumption, working times and substrate requirements from this page.
Documentation
Related documentation
Technical data sheet
1.6 MB · PDF
Ultrabond P990 1K as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
40.0 to 50.0kg
- MAPEI notched trowel for wood: 0.8 to 1 kg/m2
- over 50 m2
Order 3 to 4 packs of 15 kg aluminium bag in a plastic bucket
Taken from the Ultrabond P990 1K data sheet: CONSUMPTION: 800 to 1000 g/m2, applied with a MAPEI notched trowel for wood. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Also supplied in 7 kg bags and in cartons of twenty 600 ml aluminium sausages, which are ordered by volume rather than weight.
Application
Where it is used.
- 01Bonding interlocking prefinished multilayer parquet
- 02Engineered wood slats and planks of any format and species
- 03Projects needing a ready to use one component adhesive
- 04Wood floors where an elastic bond must absorb natural movement
Specification
Technical data.
- EMICODE EC1 Plus - very low emission
| Coverage | 800-1000 g/m². |
|---|---|
| Pack size | 15 kg |
| Open time | (skin formation): 110 minutes |
| Adjustment time | 3 hours |
| Set to light foot traffic | after 12 hours |
| Colours | Pale |
| Consistency | creamy paste |
| Storage and shelf life | Store Ultrabond P990 1K for 12 months in the original tightly closed packages under normal conditions at temperatures below +25°C. Long-distance transport may require the use of thermally insulated containers. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.40 g/cm³ |
| Dry solids | 100% |
Typical values as Mapei prints them in the data sheet for Ultrabond P990 1K. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
15 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Store Ultrabond P990 1K for 12 months in the original tightly closed packages under normal conditions at temperatures below +25°C. Long-distance transport may require the use of thermally insulated containers. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond P990 1K, a flooring adhesive manufactured by Mapei. Allow 0.8 to 1 kg/m2, as published by the manufacturer. Supplied in 15 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond P990 1K |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.8 to 1 kg/m2 |
| Pack size | 15 kg |
| Set time | after 12 hours |
| Open time | (skin formation): 110 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 800-1000 g/m².
15 kg
You can download the official Ultrabond P990 1K technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Ultrabond P990 1K in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond P990 1K you need, or describe the job and we will work it out with you.

