
Mapei Flooring SystemNo. 11 / 24
Topcem Technical Data Sheet (TDS)
Flooring System to EXT EN 13813 C30 F6 A1.
Topcem is a binder rather than a finished mix, batched on site with graded aggregate at 200 to 250 kg per cubic metre to form bonded, unbonded and floating screeds. Screeds are the depth end of this range, which is why consumption is quoted at 2 to 2.5 kg per square metre per centimetre of thickness rather than per millimetre.
- Bonded, unbonded and floating screeds
- Screeds before wood, PVC and linoleum flooring
- Screeds before ceramic tiles and natural stone
- Screeds incorporating underfloor heating or cooling
- Patching and repairing floor screeds
- Interior and exterior use
Build a list across products and send it once, or ask about Topcem on WhatsApp now.
- Class
- EXT EN 13813 C30 F6 A1
- Consumption
- 0.2 to 0.25 kg/m² per mm
- Pack we stock
- 20 kg
- Colour
- grey
Mapei document 00207 · revision 12-2017
About Topcem
Normal setting with fast drying and controlled shrinkage means the screed takes light foot traffic after about 12 hours, and it is classified EN 13813 C30 F6 A1 for interior and exterior use. Workability runs 60 minutes and application temperature spans +5°C to +40°C, the top of which is a real UAE condition: shade the stored bags, mix with cool water, and keep the pour out of the hottest hours of the day.
Documentation
Related documentation
Technical data sheet
Revision 12-2017 · 6.1 MB · PDF
Topcem as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 80 mm.
As published in the data sheet
400 to 500kg
- 0.2 to 0.25 kg/m2 per mm
- 40 mm thick
- over 50 m2
Order 20 to 25 packs of 20 kg bag
Taken from the Topcem data sheet: CONSUMPTION: consumption varies in relation to the thickness of the screed and the dosage of Topcem. For doses of 200 to 250 kg of Topcem per m3 of aggregates, consumption is 2 to 2.5 kg/m2/cm of thickness. No site allowance is added unless you turn one on. This is the binder only, not the finished screed. 2 to 2.5 kg/m2 per cm is 0.2 to 0.25 kg/m2 per mm, and it holds only at the sheet's dosage of 200 to 250 kg of Topcem per cubic metre of aggregate; the sand is a separate order, silt free and graded 0 to 6 mm. The sheet's own build ups are bonded screeds 10 to 40 mm thick, unbonded screeds at least 40 mm and floating screeds at least 55 mm, all to BS 8204-1:2003, which is where the 10 to 80 mm bounds and the 40 mm default come from.
Application
Where it is used.
- 01Bonded, unbonded and floating screeds
- 02Screeds before wood, PVC and linoleum flooring
- 03Screeds before ceramic tiles and natural stone
- 04Screeds incorporating underfloor heating or cooling
- 05Patching and repairing floor screeds
- 06Interior and exterior use
Specification
Technical data.
- EXT EN 13813 C30 F6 A1
- EN 13813
| Classification | EXT EN 13813 C30 F6 A1 |
|---|---|
| Coverage | Consumption varies in relation to the thickness of the screed and the dosage of Topcem. For doses of 200-250 kg of Topcem per m³ of aggregates, consumption is 2-2.5 kg/m /cm of thickness. |
| Pack size | 20 kg |
| Pot life | 60 minutes |
| Set to light foot traffic | after 12 hours |
| Colours | grey |
| Mixing ratio | 200-250 kg of Topcem with 1 m³ of aggregate (diameter |
| Application temperature | from +5°C to +40°C |
| Consistency | powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Topcem has a shelf life and or high humidity conditions the shelf life of 12 months. If stored at high temperature may be reduced. |
| Density | 850 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Topcem. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
200-250 kg of Topcem with 1 m³ of aggregate (diameter. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Topcem has a shelf life and or high humidity conditions the shelf life of 12 months. If stored at high temperature may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Topcem, a flooring system manufactured by Mapei, classified EXT EN 13813 C30 F6 A1. Allow 0.2 to 0.25 kg/m2 per mm, as published by the manufacturer. Mix at 200-250 kg of Topcem with 1 m³ of aggregate (diameter. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Topcem |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Classification | EXT EN 13813 C30 F6 A1 |
| Consumption | 0.2 to 0.25 kg/m2 per mm |
| Pack size | 20 kg |
| Mixing ratio | 200-250 kg of Topcem with 1 m³ of aggregate (diameter |
| Set time | after 12 hours |
| Pot life | 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Topcem is classified EXT EN 13813 C30 F6 A1 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: Consumption varies in relation to the thickness of the screed and the dosage of Topcem. For doses of 200-250 kg of Topcem per m³ of aggregates, consumption is 2-2.5 kg/m /cm of thickness.
20 kg
You can download the official Topcem technical data sheet as a PDF directly from this page, revision 12-2017, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
Topcem in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Topcem you need, or describe the job and we will work it out with you.

